• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1082-1082
• /
• 2001

Extrusion is one of the most important processes in polymer industry. The characterization of the polymer melt during processing will improve this process noticeably, One possibility of characterizing the actual processed polymer melt is the inline near infrared (NIR) spectroscopy, With this method several polymer properties can be observed during processing, e.g. composition, moisture ormechanical properties of the melt. For this purpose probes for transmission and reflection measurements have been developed, withstanding the high temperatures and pressures appearing during extrusion process (tested up to 300$^{\circ}C$ and 10 ㎫). For the transmission system an optical bypass was developed to eliminate disturbing spectral influences and hence increase the long term stability, which is the prerequisite for an industrial application. Measurements in transmission and reflection produced comparable results (or blending processes, where the prediction error was less than 1%. An optimum RMSEP of only 0.24% was found for preprocessed polymer blends measured in transmission on a laboratory extruder. A transflection measurement allowed for the first time the recording of relevant NIR-spectra in the screw area of an extruder. The application to a (PE+PP) blending process delivered promising results. This new measurement mode allows the observation of the ongoing processes within the screw area, which is of maximum Interest for reactive extrusion processes. Due to economic reasons the calibration transfer between different extrusion systems is also of high importance. Investigations on simulated and real-world spectra showed that a calibration transfer is possible. A new method alternatively to the well-known direct standardization procedures was developed, which is based on an automatic data pretreatment. This procedure delivers comparable results for the calibration transfer. Overall this paper presents concepts, components and algorithms for the inline near infrared (NIR) spectroscopy for polymer extrusion, which allows the use of it in a real industrial extrusion process.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.902-908
• /
• 2009

TETRA는 유럽 전기 통신 표준협회에서 제안한 D-TRS 서비스의 표준이다. 현재 국가전력IT무선 기간망으로 TETRA가 채택되어, 다양한 활용을 위한 국가사업이 진행되고 있는 실정이다. 이와 같은 경우 TETRA 무선망을 이용하기 위해서는 TETRA 모뎀이 필요하게 된다. 따라서 각 제조사별로 존재하는 다양한 TETRA 모뎀의 성능 평가가 절실한 상황이다. 본 논문에서는 D-TRS 무선망 환경에서의 패킷 데이터 성능 평가를 위해 PED(Protocol Evaluation Data)를 제안하였다. 또한 Test Bed 상에서 TG(Traffic Generator)와 TA(Traffic Analyzer)를 이용하여 데이터 길이 및 전송 인터벌에 따른 성능 측정을 실시하여 모뎀의 성능을 알아보았다. 데이터 크기는 최초 10바이트에서 400바이트까지 10바이트씩 증가시키면서 측정하였고, 0.5초, 1초, 1.5초간격으로 각각 1000번 씩 전송하여 전송시간을 측정하였다. 측정한 전송시간을 바탕으로 평균전송속도, MER(Message Error Rate)을 도출하여 TETRA 모뎀 성능을 측정하였다. 본 논문에서 사용한 TETRA 모뎀은 EADS 사의 TMR880i 2대를 사용하였고, 교환기로는 EADS 사의 SwMI (Switching and Management Infrastructure)를 이용하였다.

• 전기전자학회논문지
• /
• 제13권3호
• /
• pp.80-86
• /
• 2009

TETRA는 유럽 전기 통신 표준협회(ETSI)에서 Digital Trucked Radio기반의 표준이다. 우리나라 국가전력IT 무선 기간망으로 TETRA가 채택되었다. 이와같은 상황에서 TETRA 무선망을 사용하기 위해서는 TETRA 모뎀이 필요하게 된다. 본 논문에서는 TETRA 네트워크에서의 트래픽에 따른 모뎀의 성능평가와 그 결과를 분석하였다. 본 논문에서는 ETSI에서 제안한 PEI(Peripheral Equipment Interface)에서 제시하는 전송 규격 중 SDS type-4 전송방식을 사용하였다. 성능 측정은 SDS로 전송하는 데이터의 크기와 전송간격을 조절하면서 실시하였다. 데이터 크기의 범위는 10바이트에서 140바이트까지 10바이트씩 증가하도록 하였다. 또한 각 전송 데이터 크기마다 전송 전송간격을 0.5초, 1초, 1.5초로 주어 각각 1000번씩 측정하였다. 본 논문에서 사용된 TETRA모뎀은 유니모에서 만든 MU-1000MD이고, 교환기는 Teltronic 사의 SwMI(Switching and Management Infrastructure)를 사용하였다.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.209-219
• /
• 2013

We have used the modified diffusion flame burner to synthesize silica coated iron oxide nanoparticles having enhanced superparamagnetic property. Silica-encapsulated iron oxide particles were directly observed using a high resolution transmission electron microscope. From the energy dispersive X-ray spectroscopy (EDS) and zeta potential measurements, the iron oxide particles were found to be completely covered by a silica coating layer. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) measurements revealed that the iron oxide core consists of ${\gamma}-Fe_2O_3$ rather than ${\alpha}-Fe_2O_3$. Our magnetization measurements support this conclusion. Biocompatibility test of the silica-coated iron oxide nanoparticles is also conducted using the protein adsorption onto the coated particle.

• 한국가시화정보학회지
• /
• 제2권1호
• /
• pp.12-17
• /
• 2004

The physical characteristics of soot near the soot inception point were investigated with various measurements. In-situ measurements of particle size and volume fraction were introduced based on time resolved laser-induced incandescence (TIRE-LII) and laser-induced ion mobility (LIIM). The one has more convenience and accuracy than conventional LII technique and the other works best for particle sizes of a few nanometers at high concentrations in a uniform concentration field. A complementary ex-situ measurement of particle size is nano differential mobility analyzer (Nano-DMA), which recently developed for measuring particle sizes between 2nm and 100nm and provides high-resolution size information for early soot. Particles will be also collected on transmission electron microscope (TEM) grids using rapid thermophoretic sampling and analyzed for morphology. These measurements will allow fresh and original insight into the characterizing soot inception process. The measured physical properties of incipient soot will clarify the controlling growth mechanism combined with chemical ones, and the dominant mechanism for soot modeling can be deduced from the information.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1592-1601
• /
• 1998

The growing use of unlicensed wireless systems has spurred interest in the 2.4 Ghz ISM band. In order to facilitate the efficient design of such systems, understandings of the propserties of radio wave propagation in buildings is necessary. Many authors have reported about statistical propagation models based on the extensive measurements in buildings. However, measurement based statistical analysis will not be enough for the optimum deployment of the communication systems in the specific building. Aviding expensive measurements in the individual buildings prior to installation, or adjustments afterwards, theoretical prediction models have been developed to predict the path loss and delay spread from the building floor plane. Predictions shows good agreements with measurements except for a few environments which was surrounded by heavy scatterers.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.47-52
• /
• 2016

Fault location identification in the transmission line is an essential part of quick service restoration for maintaining a stable in power system. The application of digital schemes to protection IEDs has led to the development of digital fault locators. Normally, the impedance measurement had been used to for the location detection of transmission line faults. It is well known that the most accurate fault location scheme uses two-ended measurements. This paper deals with the complete design of a fault locator using GPS time-synchronized phasor for transmission line fault detection. The fault location algorithm uses the transmitted relaying signals from the two-ended terminal. The fault locator hardware consists of a Main Processor Unit, Analog Digital Processor Unit, Signal Interface Unit, and Power module. In this paper, sample real-time test cases using COMTRADE format of Omicron apparatus are included. We can see that the implemented fault locator identified all the test faults.

• 한국위성정보통신학회논문지
• /
• 제11권2호
• /
• pp.69-73
• /
• 2016

In order to derive reliable propagation models for future millimeter-wave frequency indoor pico-cellular communications systems, accurate reflectivity data of building materials is necessary. The broad variety of building materials and construction codes makes accurate attenuation prediction very difficult without the support of specific construction data or measurements. This paper derives a transmission and reflection coefficient based on 13 GHz to 28 GHz measurement data. Transmission and reflection is measured by applying change in the reception angle of each building material, such as plasterboard. The transmission and reflection coefficient derived shows a correlation between frequency dependence and angle. As a result, as the reception angle is reduced, the reflected angle from the transmitter that could be received increases, showing that there is a correlation. In addition, the fundamental investigations carried out lay the foundation for radio channel-related research, which is essential for the development of future millimeter-wave communications systems.

• 소성∙가공
• /
• 제22권8호
• /
• pp.442-449
• /
• 2013

The solenoid valve case of an 8-speed automatic transmission plays a role in maintaining the valve seal, which prevents an inflow of foreign substances into the transmission. The seal increases the reliability of the automatic transmission's performance. As a solution to pollution-related problems and to reduce fuel consumption, transmissions are being made with more gears to work more economically and have reduced fuel consumption. These newer transmission require greater dimensional tolerances and need to be manufactured with more precision. In the current study, the design of a multistage drawing considering both the product's height and limit draw ratio (LDR) of the material was performed using both a theoretical analysis and the expertise of industrial experts. The finite element modeling (FEM) simulation was performed using the commercial software, PAM-stamp, and tests of the dimensional measurements for a prototype were performed to verify the optimal progressive process.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.124-126
• /
• 1983

This paper presents automated system for trunk test in a telephone network. Test results anlysis were executed by the controller using a microprocessor. Transmission measurements for loss, error are made by the automated measuring enipment.