• ETRI Journal
• /
• v.9 no.2
• /
• pp.24-35
• /
• 1987

A Design and Fabrication of 565 Mbit/s Optical Fiber Transmission Link We calculated the transfer functions of optical channel components and formulated the optimum transfer function of optical receiver for optical transmission to show a design rule of fiber optical link for digital transmission. And we evaluated various causes of sensitivity degradation to determine the receiver specification. Also we fabricated and demonstrated a 565Mbit/s single mode fiber optic link, 27km, to show the practicality of designed fiber optic link. The output power of the transmitter was above -3dBm, and the sensitivity of the optical receiver was -37.8dBm which is the same value we expected. Also the dynamic range was more than 25dB.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.150-158
• /
• 2007

We consider channel-coded multi-input multi-output (MIMO) orthogonal frequency-division multiplexing (OFDM) transmission and obtain a condition on its signal for it to attain the maximum diversity and coding gain. As this condition may not be realizable, we propose a suboptimal design that employs an orthogonal transform and a space-frequency interleaver between the channel coder and the multi-antenna OFDM transmitter. We propose a corresponding receiving method based on block turbo equalization. Attention is paid to some detailed design of the transmitter and the receiver to curtail the computational complexity and yet deliver good performance. Simulation results demonstrate that the proposed transmission technique can outperform the conventional coded MIMO OFDM and the MIMO block single-carrier transmission with cyclic prefixing.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.114-120
• /
• 1997

A design method is newly presented for the creation of planar type filters which shapes will be nonuniform transmission line with continuously varying characteristic impedances. Those filters yield frequency characteristics of the bandstop filter in transmission, and have not nay discontinuities. The design is achieved by the control of wave propagation in view to both reflection an transmission properties on the dispersive nonuniform line within the desired frequency band. The developed algorithm is based on optimized perturbations of inherent nulls of lobes from the solution of first-order nonlinear differential equation for reflection coefficients of the nonuniform line, and an appropriate distribution of reflection coefficient which affects to filter length and bandwidth. Practical measurements for designed wideband microstrip and stop filter show very good agreement with theoretical results.

• International Journal of Automotive Technology
• /
• v.8 no.5
• /
• pp.593-598
• /
• 2007

A new continuously variable transmission for bicycles(B-CVT) is developed by using a traction drive mechanism having inner and outer spherical rotors. The B-CVT has high power efficiency, large torque capacity, improved drivability and good packageability. The ratio change mechanism for the B-CVT is very simple, in contrast with other traction drive CVTs. After completing a conceptual design, a performance analysis and a detail design, a prototype of the B-CVT has been manufactured. The prototype has rated power of 100 watts, pedal speed of 6 rad/s and an overall speed ratio of 1.0-4.0. A bench test and an actual bicycle test have been performed to verify the practicability of the B-CVT.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.431-439
• /
• 1996

New design principles nad necessary conditions for a mechanical system have been suggested to be kept in the design process using a washing machine transmission as a model. The necessary conditions are funcitnal requirement condition and spatial arrangement condition. The design principles to satisfy the necessary conditions are the principle of sequence and the principle of expansion. Decision sequence for state variables and design varibles of various mechanicla elements have been formulated. New automatic design program for washing machine transmission has been developed observing the necessary conditions and design principles investigated in this study. It was verified to be very effective to follow the design conditions, principles nad formulated decision sequence in mechanical system design process.

• Journal of the Korean Society of Costume
• /
• v.64 no.5
• /
• pp.154-167
• /
• 2014

This study explored culture adaptive attitudes and donning practices of traditional dress among Chinese marriage immigrant women. Quantitative research was conducted on Korea-Chinese multicultural families. Participants were 291 married women in Seoul and Gyeonggi Province. The data was analyzed using frequency analysis, factor analysis, t-test and correlation analysis. The findings are as follows: First, positive relationship was found between Hanbok acceptance attitudes and Qipao transmission attitudes. The level of Qipao transmission attitudes was higher than Hanbok acceptance attitudes especially in the part of knowledge. Han Chinese showed stronger Qipao transmission attitudes than Korean Chinese. Immigrants without Korean nationality had stronger Qipao transmission attitudes. Higher education group and higher income group showed higher level both on Hanbok acceptance attitudes and Qipao transmission attitudes. Second, more than 50% of Chinese marriage immigrant women wore Hanbok once or twice per a year. On the other hand, only 24% of them wore Qipao. This result shows that there exists a gap in the Qipao transmission attitudes and donning practices. 44% of women wore both Hanbok and Qipao in their own wedding ceremony, 32% wore only Hanbok, and 19% wore only Qipao. 64% of women had an experience of wearing Hanbok on special days such as traditional holidays or family affairs, whereas only 29% had worn Qipao.

• Earthquakes and Structures
• /
• v.17 no.4
• /
• pp.387-398
• /
• 2019

On the basis that ground motions may arrive at a structure from any horizontal direction and that different directions of seismic incidence would result in different structural dynamic responses, this paper focuses on orienting the crucial seismic incidence of transmission tower-line systems based on the wavelet energy method. A typical transmission tower-line system is chosen as the case study, and two finite element (FE) models are established in ABAQUS, with and without consideration of the interaction between the transmission towers and the transmission lines. The mode combination frequency is defined by considering the influence of the higher-order modes of the structure. Subsequently, wavelet transformation is performed to obtain the total effective energy input and the effective energy input rate corresponding to the mode combination frequency to further judge the critical angle of seismic incidence by comparing these two performance indexes under different seismic incidence angles. To validate this approach, finite element history analysis (FEHA) is imposed on both FE models to generate comparative data, and good agreement is found. The results demonstrate that the wavelet energy method can forecast the critical angle of seismic incidence of a transmission tower-line system with adequate accuracy, avoiding time-consuming and cumbersome computer analysis. The proposed approach can be used in future seismic design of transmission tower-line systems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1025-1032
• /
• 2022

In this paper, the TDMA-based PoE wireless multi-IP camera transmission system using wireless communication technology is developed to reduce the burden of construction costs caused by the existing wired-based CCTV surveillance system and IP camera system. It intends to design and implement the long-distance wireless transmission technology of video. The transmission/reception prototype of the line IP transmission system and the wireless multi-IP camera transmission terminal and image acquisition device (SB-200) for the proposed related technology were described.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.38-39
• /
• 2006

KEPCO is executing a project in Cambodia consisting of two components, "Power Development Master Plan and Institutional Strengthening" and "Greater Mekong Sub-region (GMS) Power Project Preparation" upon request by the government of the Ministry of Industry, Mines and Energy of Cambodia, contracted on $29^{th}$ September 2005. This paper includes a basic design and review of economical efficiency for constructing the two (2) cross border 115 kV transmission lines, which run from the border of Vietnam and Laos to Cambodia, and four (4) 115kV substations. The main contents of the paper include the process of design and results of a review of line route selection, tower and hardware design regarding transmission line design, as well as the type of substation, and arrangement and specifications of equipment with expects to substation design. Also, long-term demand forecasting, and an economic analysis of the project area are included.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.87-92
• /
• 2000

This paper describes a three dimensional parametric modeling system for transmission gears of tractor. In conventional design and manufacturing, information about three dimensional shapes has been described in engineering drawings. However drawing based design presents several problems; 1) communication errors between the designer and the modeller or manufacturer. 2) time taken and costs incurred in the design process. To solve these problems the system of parametric design based modeling has been proposed. Developed system in this paper consists of four steps; 1) parametric design of transmission gears with a solid modeler. 2) evaluation of gear geometry and strength. 3) dynamic simulation for gear interference check. 4) gear stress analysis with a CAE software. The proposed system has been tested in the fields and found to be a useful system.