• 제목/요약/키워드: Transmission characteristic

검색결과 996건 처리시간 0.029초

기판적층형 가유전체 전송선로의 특성 임피던스 계산 방법 (A Method for Calculating the Characteristic Impedance of Substrate Integrated Artificial Dielectric Transmission Lines)

  • 임종식;구자경;한상민;정용채;안달
    • 전기학회논문지
    • /
    • 제58권8호
    • /
    • pp.1585-1591
    • /
    • 2009
  • This paper describes a new method for extracting characteristic impedance of transmission line using Substrate Integrated Artificial Dielectric (SIAD). The new procedure to calculate the characteristic impedance of SIAD transmission line is described with the proper equations and basic transmission line theory. The characteristic impedance is determined as an almost fixed value in the proposed method, while it fluctuates according to frequency in the previous method. As the result, the effective dielectric constant of SIAD transmission line is calculated as a fixed value rather than fluctuating one. In order to show the validity of the proposed method, SIAD microstrip lines are simulated and measured, and characteristic impedances and effective dielectric constant are calculated and compared to the previous method.

송전 선로의 사고 거리에 따른 특성 주파수 해석 (Analysis of Characteristic Frequency along Fault Distance on a Transmission Line)

  • 남순열;홍정기;강상희;박종근
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제53권8호
    • /
    • pp.432-437
    • /
    • 2004
  • Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

슬롯을 가진 삼각패치형 인공전송선로 (A Slotted Triangular-Patch Type Artificial Transmission Line)

  • 오송이;최경;황희용
    • 정보통신설비학회논문지
    • /
    • 제9권4호
    • /
    • pp.164-167
    • /
    • 2010
  • In this paper, an artificial transmission line of triangular-patch type with slots is proposed. This artificial transmission line is useful for miniaturizing the electrical lengths of conventional transmission lines. Also, this structure is easy to regulate the characteristic impedance and electrical lengths. The electrical lengths and the characteristic impedances of the proposed artificial transmission line with some parameters are researched and summarized The proposed artificial transmission line could be useful for compact designs for most of the passive microwave components. The optional-artificial transmission line is fabricated and measured at 2.45GHz.

  • PDF

특성 정보를 이용한 비디오 스트림의 효율적 전송 (On the efficient transmission of video stream using characteristic information)

  • 강수용;염헌영
    • 한국통신학회논문지
    • /
    • 제21권9호
    • /
    • pp.2328-2340
    • /
    • 1996
  • Until now, the transmission of data for VOD(Video on Demenad) was based on a real time modelling of video data. Markow Modulated Fluid Sources(MMFS) and Markow Modulated Poisson Sources(MMPS) are the most widely used modelling methods. But the charactersitics of the VBR(Variable Bit Rate) signal prevents modelling from actually being "real-time". Also these methods call for the use of large buffers for the abolishment of cell loss. These modelling methods are, of course, useful i case of teleconferences where a real time modelling of video traffic is inevitable, but they are insufficient in cases where the characteristic infomation of video traffic can be obtained beforehand-cases such as VOD. Video data is speial in that if one file is preprocessed all other products can simply be copied from that onepreprocessed file. This characteristic helps reduce the overhead arising from the job of drawing out characteristic information to almost zero. But still, compared to the existing real time modelling method data transmission using characteristic information succeeds in raising the efficiency of data transmission. In tis paper we will outline a method of dta transmission which use the characteristic information of each video stream, and evaluate this method through some experiments.periments.

  • PDF

주기구조가 결합된 전송선로의 특성 임피던스 계산 (Calculation of the Characteristic Impedance of Transmission Lines with Periodic Structures)

  • 임종식;이재훈;이 준;한상민;안 달
    • 한국산학기술학회논문지
    • /
    • 제11권7호
    • /
    • pp.2541-2548
    • /
    • 2010
  • 본 논문에서는 결함접지구조와 포토닉 밴드갭과 같은 주기구조가 삽입된 전송선로의 특성 임피던스 계산에 대하여 기술한다. ${\lambda}$/4 전송선로 이론을 이용한 계산하는 종래 방법을 고찰하고, 이 방법에 의한 계산 결과가 주파수 의존성이 커서 신뢰도가 낮다는 문제점을 제시한다. 균일한 유전체 기판에 구현된 전송선로의 특성 임피던스 계산에 적용되는 해석적인 방법을 주기구조가 결합된 전송선로에서도 적용될 수 있음을 보인다. ${\lambda}$/4 전송선로 방법과 대신 해석적 방법으로 특성 임피던스를 구하고, 후자의 결과가 주파수에 관계없이 비교적 고정된 값을 가짐을 제시한다. 또한 종래에 특성 임피던스 계산 사례가 없었던 PBG 구조를 지닌 전송선로에 대해서도 특성 임피던스를 계산한다. 시뮬레이션뿐만 아니라 직접 제작하여 측정한 S-파라미터로부터 각각 특성 임피던스를 계산하고 서로 비교하여 상당히 유사함을 보인다. 그리고 이를 통하여 해석적 방법에 의한 특성 임피던스의 결정 방법이 DGS와 PBG와 같은 주기구조가 결합된 전송선로의 특성 임피던스 계산에 잘 적용될 수 있음을 보인다.

결합삼각함수 선로와 그 응용 (Coupled Trigonomotric Transmission Line and its Application)

  • 박송배
    • 대한전자공학회논문지
    • /
    • 제12권6호
    • /
    • pp.14-20
    • /
    • 1975
  • 일반적인 결합불균일선로에 대한 이론을 적용하여 결합삼각함수선로(CTTL)의 특성을 연구하였다. 우선 CTTL의 4-Port 전달메이트릭스 퍼래미터를 유도한 다음 이것을 사용하여 CTTL을 이용한 전역통과회로와 방향통합전압을 해석하였다. 선로에 연한 결합계수의 변화에 따라서 전역통도관로의 위상특성과 방향성결합기의 결합전압의 크기의 변화를 상세하게 연구하였다. 최후로 CTTL를 사용한 광대역 90° 차동위상추이기와 고역통과 방향성통합기의 설계예를 들고 그 실현방법을 고찰하였다. Characteristics of coupled trigonometric transmission lines (CTTL) are studies based on the theory of general coupled nonuniform transmission lines. First, the 4-port transmission matrix parameters of networks and directional couplers using CTTL. The phase slrift characteristic of the all-pass networks and the magnitude characteristic of the directional couplers are studied in detail for various coupling and a high-pass small ripple directional coupler using CTTL are given and their physical realization is considered.

  • PDF

Joint-characteristic Function of the First- and Second-order Polarization-mode-dispersion Vectors in Linearly Birefringent Optical Fibers

  • Lee, Jae-Seung
    • Journal of the Optical Society of Korea
    • /
    • 제14권3호
    • /
    • pp.228-234
    • /
    • 2010
  • This paper presents the joint characteristic function of the first- and second-order polarization-modedispersion (PMD) vectors in installed optical fibers that are almost linearly birefringent. The joint characteristic function is a Fourier transform of the joint probability density function of these PMD vectors. We regard the random fiber birefringence components as white Gaussian processes and use a Fokker-Planck method. In the limit of a large transmission distance, our joint characteristic function agrees with the previous joint characteristic function obtained for highly birefringent fibers. However, their differences can be noticeable for practical transmission distances.

mechanism of Equivalent Power Distribution in Parallel Connected ICP for Large Area Processing

  • 이진원;배인식;안상혁;장홍영;유신재
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.510-510
    • /
    • 2012
  • 반도체, 디스플레이, 태양광 등의 공정에서 사용되는 웨이퍼의 크기가 증가하고, 생산률이 플라즈마의 밀도에 비례한다는 연구 결과가 발표되면서 대면적 고밀도 플라즈마 소스 개발에 대한 연구가 활발히 진행되고 있다. 특히, ECR, ICP, Helicon plasma 등 고밀도 플라즈마 소스에 대한 관심이 높아지고 있다. 이에 따라, 여러 개의 ICP를 결합한 multiple ICP를 이용해 대면적 고밀도 플라즈마 소스 개발을 진행했다. Multiple ICP의 경우 각 ICP 소스에 같은 power (current)를 공급해야만 균일한 플라즈마 방전이 발생되어 균일도를 확보 할 수 있다. Current controller 같은 추가적인 장비를 설치하지 않고, power를 분배하는 transmission line을 coaxial 형태로 설계하고 같은 길이로 병렬 연결함으로써 각각의 ICP소스에서 균일한 플라즈마를 방전시킬 수 있었다. Power generator에서 보는 각 ICP의 total impedance는 각 ICP 소스의 impedance와 coaxial 형태의 transmission line의 characteristic impedance, frequency, 길이의 함수로 구할 수 있고, 이 total impedance가 일정하기 때문에 current가 균등하게 분배되어 각 ICP소스에 균등한 power 분배가 가능한 것이다. 실질적으로 ICP 소스의 impedance는 플라즈마 방전 유무에 따라 변화하기 때문에 일정하게 유지하는 것은 어렵다. Transmission line의 characteristic을 사용함으로써 ICP의 impedance의 변화에 상관없이 Total impedance를 일정하게 유지시킴으로써 균등한 power 분배가 가능하다는 것을 연구했다. Frequency는 13,56MHz, characteristic impedance를 $50{\Omega}$ (coaxial cable)으로 고정하고, ICP 소스의 플라즈마 방전 유무/antenna turn/소스 위치에 따른 total impedance를 transmission line의 길이에 따라 측정하고, 이를 이론값, 그래프와 비교하였다. 특정 length에서 플라즈마 방전 유무(ICP의 impedance 변화)와 상관없이 비교적 일정한 total impedance를 유지하는 것을 확인 했다. 이것은 특정 길이를 갖는 coaxial형태의 transmission line를 연결하면, total impedance는 플라즈마 방전 유무로 발생하는 ICP의 impedance 변화와 상관없이 일정하게 유지되어 각 ICP소스에 균등한 파워 분배가 가능하다는 것을 보여준 결과이다. 이것을 토대로 frequency에 따라(또는 characteristic impedance에 따라) 균등한 파워 분배가 가능한 coaxial 형태 transmission line의 특정 길이를 구할 수 있고, 대면적 소스에서 균등한 파워 분배를 위한 병렬연결에 적용할 수 있을 것이다.

  • PDF

평면 작업용 병렬 메카니즘의 특성 해석을 위한 기하학적 접근 (A Geometrical Approach to the Characteristic Analysis of Parallel Mechanism for Planar Task)

  • 송낙윤;조황
    • 한국정밀공학회지
    • /
    • 제15권9호
    • /
    • pp.158-166
    • /
    • 1998
  • This paper presents a geometrical approach to the characteristic analysis of parallel mechanism with free joints intended for use as a planar task robot. Solution of the forward and inverse kinematic problems are described. Because the mechanism has only three degree-of-freedom output, constraint equations must be generated to describe the inter-relationship between actuated joints and free joints so as to describe the position and orientation of the moving platform. Once these constraints are incorporated into the kinematics model, a constrained Jacobian matrix is obtained. and it is used for the solution of the forward kinematic equations by Newton-Raphson technique. Another Jacobian matrix was derived to describe the interrelationship between actuated joints and moving platform. The stiffness, velocity transmission ratio, force transmission ratio and dexterity of the mechanism are then determined based on this another Jacobian matrix. The geometrical construction of the mechanism for the best performance was investigated using the characteristic analysis.

  • PDF

설비고장의 불확실성을 고려한 송변전계통의 공급신뢰도 특성곡선에 관한 연구 (A Study on Reliability Characteristic Curve of Transmission & Substation System considering Device Fault's Uncertainty)

  • 전동훈;김건중
    • 전기학회논문지
    • /
    • 제57권9호
    • /
    • pp.1500-1506
    • /
    • 2008
  • In this paper, we proposed new reliability characteristic curve, which-can clearly show reliability property of transmission and substation system considering uncertainty such as frequency and duration of device fault. It express the relationship of duration of load curtailments, demand not supplied, and energy not served as “ y = $ax^{-1}$ " curve. and we proposed the method, which can objectively assess reliability of transmission and substation system using proposed characteristic curve as new reliability index. In this method, we used energy index of reliability(EIR) as a criterion of assessment. Finally, we performed a variety of case study for KEPCO system in order to verify usefulness of proposed method.