• Parasites, Hosts and Diseases
• /
• v.29 no.2
• /
• pp.149-160
• /
• 1991

Each of SPF mice(Scl: ICR strain, 3-week-old males) was inoculated with 5$\times$104 oocysts of Cryptosporidium by stomach tube. The oocysts were large type one which was previously isolated from Korean mice, and passaged in 3-week-old SPF mice. The patterns of oocyst discharge were monitored daily, and in order to observe the ultrastructure of developmental stages the stomach of the mice was examined by transmission electron microscopy (TEM) at 4 weeks post-inoculation. The prepatent period for 6 mice was 5.6 days post-inoculation on the average, and the patent period was 63.2 days. The number of oocysts discharged per day from the mice reached peak on day 36.6 post-inoculation on the average. A large number of oocysts were found in fecal samples obtained from inoculated mice on days 30~50 post-inoculation. C. tsuris was larger than C. parvum at almost every developmental stages, the sixte difference being 1.4 times in oocysts, 2.4 times in sporozoites, 1.6 times in merozoites, and 1.5 times in microgametes. The ultrastructural features of the attachment site of C. tsuris to the mucus cells were remarkably different from those of C. parvum and its closely related species. The anterior projection of the protozoa (C. muris), the outer aspect of which was surrounded by a thick filamentous process of the host cell, has not been reported at any developmental stages of C. parvum or its closely related species. The size of the oocysts of strain RN 66 was larger than that of Korean mice origin. The above results reveal that the large type Cryptosporidium of Korean mice origin is identified as Cryptosporidium muris and this type was named as C. muris (strain MCR).

• Progress in Medical Physics
• /
• v.16 no.4
• /
• pp.192-201
• /
• 2005

Experiments and simulation were done to study the impact of contrast agent when CT scan was used to attenuation correction for PET Images in PET/CT system. Whole body phantom was imaged with various concentration of iodine-based contrast agent using CT. Mathematical emission and transmission density map with liver were made to simulate for whole body FDG Imaging. A variety of factors were estimated, including non-uniform enhancement of contrast agent, concentration and distribution size of contrast agent, noise level, image resolution, reconstruction algorithm, hypo-attenuation of contrast agent, and different time phases for contrast agent. Experimental studies showed that Hounsfield unit depends on the concentration of contrast agent and tube voltage. From the simulation data, contrast agents Introduced artifacts and degraded image quality on the attenuation-corrected PET images. The severity of these effects depends on a variety of factors, including the concentration and distribution size of contrast agent, the noise levels, and the Image resolution. These results Indicated that the impact of contrast agents should be considered with a full understanding of their potential problems in clinical PET/CT images.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.656-662
• /
• 2013

The iron oxide ($Fe_3O_4$) particles in the coolant of the secondary system of a nuclear power plant reduce the heat transfer performance or induce corrosion on the surface of the heat transfer tube. To prevent these problems, we conducted a study to improve the dispersion stability of iron oxide using polymeric dispersant injection in simulated secondary system water. The three kinds of anionic polymers containing carboxyl groups were selected. The dispersion characteristics of the iron oxide particles with the polymeric dispersants were evaluated by performing a settling test and measuring the transmission, the zeta potential, and the hydrodynamic particle size of the colloid solutions. Polymeric dispersants had a significant impact on the iron oxide dispersion stability in an aqueous solution. While the dispersant injection tended to improve the dispersion stability, the dispersion stability of iron oxide did not increase linearly with an increase in the dispersant concentration. This non-linearity is due to the agglomerations between the iron oxide particles above a critical dispersant concentration. The effect of the dispersant on the dispersion stability improvement was significant when the dispersant concentration ratio (ppm, dispersant/magnetite) was in the range of 0.1 to 0.01. This suggests that the optimization of dispersant concentration is required to maximize the iron oxide removal effect with the dispersant injection considering the applied environments, the iron oxide concentration and the concentration ratio of dispersant to iron oxide.

• Tuberculosis and Respiratory Diseases
• /
• v.68 no.6
• /
• pp.328-333
• /
• 2010

Background: There are several active tuberculosis (TB) cases in Korean high schools each school year. The risk of transmission in schools is extremely high due to the considerable time spent in closed classrooms. We evaluated the control of latent tuberculosis infection in Korean high schools. Methods: When a student was identified with active TB, tuberculin skin testing was performed on their classmates and on students in their same school grade. When a student had a positive tuberculin skin tests (TST), they underwent follow-up testing with QuantiFERON-TB Gold In-Tube (QFT). The manufacturer recommended a cut-off of 0.35 IU/mL to determine QFT positivity was applied. Results: A total of 131 pulmonary tuberculosis (TB) patients were included based on the criteria for screening TB contacts in the National Tuberculosis Control Program. Seventy-five (57.2%) students tested smear positive. TST were performed on 7,109 students who were classmates of, or in the same grade as, a TB patient. Of the contacts, 1,231 students (17.3%) were TST positive and they were screened with QFT. Six hundred-sixty-six (55.0%) of the tested students returned a positive QFT result and the rate of positivity was significantly associated with the increasing size of TST indurations (p<0.0001). Conclusion: The use of QFT resulted in approximately 45% of TST positive students not being given chemoprophylaxis.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.172-178
• /
• 2017

Ultrasound has been widely used for biological and medical applications including induction of cell death, but a precise mechanism of induced cell death by ultrasound is controversial. In this study, an irradiation system with 40 kHz ultrasound was developed for a suitable cell death test of a representative unicellular organism, yeast, and used to study the biological effect of ultrasound on inducing cell death. Potassium Iodide (KI) dosimetry was used to devise an optimal system that successfully delivers 40 kHz ultrasound and produces reactive oxygen species in a 1.5 ml Eppendorf tube. Cell death was observed in an ultrasound transmission time-dependent fashion in this system. Thermal effect during irradiation was not observable in ultrasound induced cell death. Co-treatment of 40 kHz ultrasound and hydrogen peroxide showed a synergistic effect in inducing cell death. This finding suggests that 40 kHz ultrasound is related to reactive oxygen species formation. However, NAC (N-acetyl-L-cysteine) oxygen scavenger slightly inhibited the cell death by 40 kHz ultrasound. It was also found that 40 kHz ultrasound induced cell death was slightly inhibited by inhibitors of necrosis or apoptosis (glycyrrhizin or zVAD-fmk). This study suggests that cell death induced by 40 kHz ultrasound may not be exclusively related to reactive oxygen species formation and thermal effects in irradiated yeast cells.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.16-25
• /
• 1987

Colletotrichum acutatum, C. coccodes, C. dematium and C. gloeosporioides were detected in seed samples of red pepper (Capsicum annuum). C. dematium and C. gloeosporioides were the predominant species, maximum seed infection of the species in some samples were 84% and 28%, respectively. C. acutatum and C. coccodes were recorded only in low percentages of 1-2. The blotter method proved more suitable for detecting Colletotricum spp. than the deep freezing blotter or agar plate methods. Plating of seed components showed that C. dematium and C. gloeosporioides were recovered more frequently from seed coat, and decreasing amounts of infection were observed in the endosperm and cotyledon. Seed-borne C. dematium and C. gloeosporioides caused seed rot, damping-off, seedling blight and brown discoloration of cotyledon and hypocotyl when infected seeds were sown in agar of test tube or in soil. Inoculation experiments showed that C. acutatum was pathogenic to red fruit of red pepper and C. coccodes was highly pathogenic to red fruit and weakly pathogenic to leaf of the plant. C. dematium was highly pathogenic to leaf and green fruit and C. gloeosporioides was pathogenic to not only leaf but also green and red fruits. Host range of the four seed-borne species of Colletotrichum was also investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.

• Parasites, Hosts and Diseases
• /
• v.29 no.4
• /
• pp.315-324
• /
• 1991

Each of SPF chicken(Hi-Line strain, 2-day-old males) was inoculated with 2.5 or $5\times10^4$ oocysts by stomach tube. The oocyst was the medium type of Cryptosporidium previously isolated from Korean chicken origin, and passed in 2-day-old SPF chicken. The patterns of oocyst discharge were monitored daily, and in order to observe the ultrastructure of the developmental stages, the bursa of Fabricius of the chicken was examined by transmission electron microscopy (TEM) on the 12th day postinoculation. The prepatent period for 8 chicken was 5.9 days postinoculation on the average, and the patent period was 12.9 days. The number of oocysts discharged per day for the chicken was reached peak on day 12 postinoculation on the average. A large number of oocysts was found in fecal samples obtained from inoculated chicken on days 8~14 postinoculation. The ultrastructural feature of almost every developmental stage of the medium type from chicken was very similar to that of Cryptosporidium previously isolated from mammalia including human and birds except for the attachment site of C. tsuris to the mucus cell from mammalia, but dimension of the oocysts from fecal samples of the medium type was different from those of C. meleagridis and mammalia origin. The above results reveal that the medium type of Cryptosporidium of Korean chicken origin is identified as Cryptosporidium baileyi.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2022

In this study, in order to directly evaluate the prestress of the PSC structure, a new sensor module based on the measurement of the deformation of concrete was proposed using hetero-core optical fibers and performance tests were performed. In a hetero-core optical fiber, optical loss occurs when a specific part of the transmission path is bent, and the amount of optical loss changes linearly according to the magnitude of the curvature. In order to confirm the measurement performance of the sensor module and the applicability of the optical fiber, the sensor module was deformed and the light passing through the optical fiber was converted into wattage and measured. It can be seen that the light passing through the optical fiber has a linearity of 0.9333 in relation to the deformation while generating the maximum deformation of 0.5 mm at a rate of 0.12 mm/min in a cylindrical concrete specimen with a diameter of 15 cm and a height of 35 cm in which the sensor module is embedded. Based on the results of this experiment, it is judged that it is possible to directly evaluate the prestress of a PSC structure by embedding a sensor module using a hetero-core optical fiber in the structure and measuring the compression deformation in concrete. It is judged that it can be used as useful data for the development of a sheath tube integrated sensor module to be applied to be applied to the girder model experiment.