• 한국항행학회논문지
• /
• 제13권2호
• /
• pp.194-200
• /
• 2009

본 논문은 병렬 캐패시터와 고 임피던스 선로 그리고 CRLH-TLs (Composite Right/Left-Handed Transmission Lines)을 이용한 소형화와 대역폭 확장을 한 링 하이브리드 커플러 설계에 대한 것이다. 소형화를 위해 전송 선로의 길이를 줄이는 방법은 전송선로를 고 임피던스 선로와 병렬 캐패시터로 대체하였고, 또한 대역폭 향상을 위해서는 직렬 캐패시터와 병렬 인덕터로 구성된 CRLH 매타 재질의 비선형적인 위상특성을 이용하였다. 이렇게 제작된 링 하이브리드 커플러는 기존 커플러와 비교해서 크기는 10% 이하로 줄였으며, 대역폭은 60% 이상 확장되었음을 제시하였다.

• 한국항행학회논문지
• /
• 제15권1호
• /
• pp.97-103
• /
• 2011

본 논문은 비선형 위상 특성을 갖고 있는 CRLH 전송선로를 이용하여 이중대역 평형 믹서를 제안한 것이다. 이 메타 재질 구조의 믹서는 이중대역에서 낮은 LO 누설 전력과 높은 RF-LO 고립도를 갖고 있어, LO와 RF 경로에 추가적인 여파기가 필요하지 않는다. 이 평형 믹서는 이중대역에서 동작하는 발룬과 윌킨슨 분배기를 이용하여 구현하였으며, 이중대역 특성은 CRLH 전송선로의 비선형 위상 특성을 이용하였다. 제안한 메타 재질을 이용한 평형 믹서는 실험을 결과를 통해서 증명하였으며, 870 MHz와 1660 MHz의 주파수에서 동작하도록 제작하여, 870 MHz에서 15.2 dB, 1660 MHz에서 21.2 dB의 변환 손실을 얻었다.

• 대한전자공학회논문지TC
• /
• 제45권12호
• /
• pp.7-12
• /
• 2008

본 논문에서는 다중밴드 안테나 시스템을 위한 고효율 전력증폭기를 제시하였다. 하나의 LDMOSFET으로 이중대역에서 동작하는 class F 전력증폭기를 설계하였다. 전력증폭기의 동작 주파수는 각각 900 MHz와 2.14 GHz이다. 이중대역 동작을 위해 집중 소자로 구현한 Composite Right/Left-Handed(CRLH) 전송선로의 단위 셀을 이용하여 증폭기의 정합단과 고조파 조절 회로를 설계하였다. CRLH 전송선로는 임의로 이중대역 조절이 가능한 메타물질 전송선으로 사용될 수 있다. 증폭기의 정합단에 CRLH 전송선의 주파수 오프셋과 비선형 위상 기울기 특성을 이용하여 임의의 이중대역에서 CRLH 전송선의 동작을 가능하게 하였다. 높은 효율을 얻기 위해 모든 고조파 성분을 조절하는 것은 현실적으로 어려운 일이기 때문에 집중 소자로 구현된 CRLH 전송선을 이용하여 2차와 3차 고조파만을 조절하였다. 또한, 제안된 전력증폭기는 더 높은 효율을 얻기 위하여 출력 정합단 뿐만 아니라 입력 정합단에도 고조파 조절 회로를 사용하여 구현하였다.

• 대한전자공학회논문지TC
• /
• 제47권5호
• /
• pp.69-74
• /
• 2010

본 논문에서는 CRLH 전송선을 이용하여 임의의 주파수 두 곳에서 저지 특성을 갖는 소형 이중대역 저지대역 여파기를 제안한다. 제안된 여파기는 CRLH 전송선을 단락된 병렬 스터브로 사용하였으며 CRLH 전송선의 비선형적인 위상응답을 이용하여 이중대역 저지 특성을 구현하였다. CRLH 전송선은 마이크로 스트립과 집중소자를 이용하여 구현되었다. 이 여파기는 작은 크기이며 저지되는 두 개의 주파수를 임의로 조정할 수 있다. 본 논문에서는 GPS대역과 ISM 대역을 저지하는 여파기를 설계하였으며 GPS대역에서는 -30dB, ISM대역에서는 약 -29dB 의 저지 특성을 확인하였다. 제작된 여파기의 크기는 10mm*15mm로 소형이다.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1429-1435
• /
• 2010

In this paper, a double lorentz composite right left handed(DL-CRLH) transmission line is designed using defected ground structure (DGS) and varactor diodes. Previously, the diode has been adopted only selectively for one of parallel or series resonators, and the balanced frequency as well as triple band frequencies were fixed. However in the proposed DL-CRLH transmission line, the balanced frequency, where the resonant frequencies of the series-connected parallel resonator and shunt-connected series resonator are the same, is adjustable. In addition, the triple band frequencies are controlled, too. The measured balanced frequency varies between 3.42~4.8GHz according to the controlled bias voltage. Under the same bias condition for the balanced frequency, the adjusted frequencies are 2.22~2.77GHz, 3.7~5.2GHz, 7.32~8.23GHz, 3.42~4.8GHz, and 4.44~5.92GHz for the conditions that ${\beta}d=+0.5{\pi}$, $-0.5{\pi}$, 2nd $+0.5{\pi}$, ${\omega}_{\infty}$, and ${\omega}_o$, respectively.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.331-342
• /
• 2011

The transmission of tracked vehicles performs complex functions as steering, shifting, braking, etc. and the system level life time has been a key influenced by the number of sub-parts like as gear assembly, torque converter, clutches, bearings and so on. In particular, the mechanical type steering system in tracked vehicle has impact shock torques in steering shift and those kind of shock torques can effect on the durability of many sub-parts in power train system. The field failure modes of gear assembly, steering assembly and the bearings of output shaft appear as a very complex phenomenon. In this study, the actual failure, which may occur in field, of the transmission was investigated comprehensively and that the endurance test on the resulting output shaft bearing failure analysis and life assessment was performed. Life time test method used in this study, developed for the purpose of the internal usage, and under these testing techniques the impact of the each bearing damage, which used in tracked vehicle transmission left / right outputs of different structures, was analyzed.

• 대한전기학회논문지
• /
• 제37권5호
• /
• pp.272-281
• /
• 1988

The problem of optimal transmission system planning is to find the most economical locations and time of transmission line construction under the various constraints such as available rights-of-way, finances, the technical characteristics of power system, and the reliability criterion of power supply, and so on. In this paper the constraint of right-of-way is represented as a finite set of available rights-of-way. And the constructed for a unit period. The electrical constraints are represented in terms of line overload and steady state stability margin. And the reliability criterion is dealt with the suppression of failure cost and with single-contingency analysis. In general, the transmission planning problem requires integer solutions and its objective function is nonlinear. In this paper the objective function is defined as a sum of the present values of construction cost and the minimum operating cost of power system. The latter is represented as a sum of generation cost and failure cost considering the change of yearly load, economic dispatch, and the line contingency. For the calculation of operating cost linear programming is adopted on the base of DC load flow calculation, and for the optimization of main objective function nonlinear Branch-and-Bound algorithm is used. Finally, for improving the efficiency of B & B algorithm a new sensitivity analysis algorithm is proposed.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2032-2037
• /
• 2010

This paper describes a design of dual band amplifier using left handed (LHJ) transmission line, which is a part of composite right/left handed (CRLH) transmission line. It is well known that CRLH transmission lines show dual band frequency response. At first, two single-band amplifiers for frequency f1 and f2 are designed, and their matching networks at both amplifiers are synthesized into the dual band matching network by adopting CRLH structure. As an example for proving the validity of the proposed design, a dual band amplifier operating at 1800MHz and 2300MHz is designed, fabricated and measured. The simulation and measurement show that the proposed amplifier operates well at the desired dual bands with the gain of 13.65dB and 19dB at 1850MHz and 2360MHz, respectively, and a good matching performances. In addition, a quite good agreement between the simulation and measurement is observed.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.1-13
• /
• 2018

Purpose: The development of compact tractors that can be used in dry fields, greenhouses, and orchards for pest control, weeding, transportation, and harvesting is necessary. The development and performance evaluation of power transmission units are very important when it comes to tractor development. This study evaluates the performance of a driving power transmission unit of a 50 kW multi-purpose narrow tractor. Methods: The performance of the transmission and forward-reverse clutch, which are the main components of the driving power transmission unit of multi-purpose narrow tractors, was evaluated herein. The transmission performance was evaluated in terms of power transmission efficiency, noise, and axle load, while the forward-reverse clutch performance was evaluated in terms of durability. The transmission's power transmission efficiency accounts for the measurement of transmission losses, which occur in the transmission's gear, bearing, and oil seal. The motor's power was input in the transmission's input shaft. The rotational speed and torque were measured in the final output shaft. The noise was measured at each speed level after installing a microphone on the left, right, and upper sides. The axle load test was performed through a continuous equilibrium load test, in which a constant load was continuously applied. The forward-reverse clutch performance was calculated using the engine torque to axle torque ratio with the assembled engine and transmission. Results: The loss of power in the transmission efficiency test of the driving power unit was 6.0-9.7 kW based on all gear steps. This loss of horsepower was equal to 11-18% of the input power (52 kW). The transmission efficiency of the driving power unit was 81.5-89.0%. The noise of the driving power unit was 50-57 dB at 800 rpm, 70-77 dB at 1600 rpm, and 76-83 dB at 2400 rpm. The axle load test verified that the input torque and axle revolutions were constant. The results of the forward-reverse clutch performance test revealed that hydraulic pressure and torque changes were stably maintained when moving forward or backward, and its operation met the hydraulic design standards. Conclusions: When comprehensively examined, these research results were similar to the main driving power transmission systems from USA and Japan in terms of performance. Based on these results, tractor prototypes are expected to be created and supplied to farmhouses after going through sufficient in-situ adaptability tests.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.768-773
• /
• 2012

본 논문에서는 슬롯을 갖는 삼각 패치형 인공 전송 선로를 이용한 브랜치 라인 하이브리드를 제안한다. 제안된 인공 전송 선로는 구조가 콤팩트하고 슬롯의 파라미터들을 변화시킴으로써 선로의 특성 임피던스와 전기적 길이를 조절하는 데 용이하여 일반적인 전송 선로를 소형화시키는 데 유용하다. 제안된 브랜치 라인 하이브리드는 이러한 직각 삼각형의 인공 전송 선로들을 이용하여 구현되었기 때문에 공간의 활용도가 높고 소형화되었다. 제작된 3 dB 브랜치 라인 하이브리드는 중심 주파수 2.45 GHz의 15 % 대역폭 내에서 ${\pm}0.5$ dB의 결합도 변화 특성과 두 출력 포트 간 $91^{\circ}{\pm}4^{\circ}$의 위상차 특성을 보였다. 또한, 제안된 브랜치 라인 하이브리드의 크기는 일반적인 브랜치 라인 하이브리드 크기의 38 %이다.