• Investigative Magnetic Resonance Imaging
• /
• v.24 no.3
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2158-2170
• /
• 1999

It has been required more reliable communication on processes and improvement of system performance as distributed systems using multicast protocol became widespread. In distributed environment maintaining data consistency through asynchronous execution of processes and coordinating the activities of them would occurs. This paper proposes a total ordering algorithm, TORMP, in order to resolve these problems. TORMP takes advantage of multicast protocol and uses an effective token passing method. It reduces a process delaying time before transmitting its message by multicasting a token simultaneously to every process that initiates the request of the message. Moreover, the processes receiving the token start multicasting the message at the same time, which causes to cut down the overall transmission dely. In case that one process sends a message, TORMP hardly uses the procedure of controlling for ordering. It gives fairly the right of sending messages to all processes in a group with utilizing vector clock. In TORMP, unlike other algorithms, the number of packets generated during ordering process does not depend on the number of processes.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.680-690
• /
• 2013

In this paper, we propose a real-time temporal synchronization and compensation algorithm in stereoscopic video. Many temporal asynchronies are caused in the video editing stage and due to different transmission delays. These temporal asynchronies can degrade the perceived 3D quality. The goal of temporal alignment is to detect and to measure the temporal asynchrony and recover synchronization of the two video streams. In order to recover synchronization of the two video streams, we developed a method to detect asynchronies between the left and the right video streams based on a novel spatiogram information, which is a richer representation, capturing not only the values of the pixels but their spatial relationships as well. The proposed novel spatiogram additionally includes the changes of the spatial color distribution. Furthermore, we propose a block-based method for detection of the pair frame instead of one frame-based method. Various 3D experiments demonstrate the effectiveness of the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1402-1407
• /
• 2007

This paper presents a new design method of the Ultra-Wide-Band BandPass Filter using the CRLH-TL(Composite Right- and Left-Handed Transmission-line) having the Metamaterials' properties. Instead of the periodic type or many cells of the CRLH-TL, only the unit cell is used to miniaturize the target component, which can not be realized by the conventional quarter guided-wavelength resonator-based filters. Particularly, the strong coupling essential to the Ultra Wide Band is enabled by the interdigital coupled lines between the grounded stubs. The proposed design scheme is validated by the electromagnetic simulation and measurement of the fabricated filter which shows the total size of 'the guided-wavelength/9.4', the 100 % fractional bandwidth for the UWB, the insertion loss of less than 1 dB and the flat group-delay.

• The Korean Journal of Malacology
• /
• v.28 no.2
• /
• pp.165-174
• /
• 2012

The morphology and taxonomic values of the sperm in male Chlamys (Swiftopecten) swiftii were investigated by transmission electron microscope observations. The morphologies and ultrastructures of the sperm nucleus and the acrosome of this species are the vase type and long cone shape, respectively. Spermatozoa are approximately $45-50{\mu}m$ long including a sperm nucleus (approximately $2.60{\mu}m$ long), an acrosome (about $0.63{\mu}m$ long), and a tail flagellum (approximately $44-47{\mu}m$ in long). The axoneme of the sperm tail shows a 9+2 structure. In this study, the right and left basal rings in the acrosomal vesicle of this species show electron opaque part (region), and also the anterior apex part of the acrosomal vesicle shows electron opaque part (region). These characteristics of the acrosomal vesicle were found in Pectinidae and other several families in subclass Pteriomorphia. The number of mitochondria in the midpiece of the sperm of this species are four, as one of common characteristics appear in most species in Pectinidae in subclass Pteriomorphia. In addition, the satellite fibres are found near the distal centriole of this species, as have been reported in other species of Pectinidae in subclass Pteriomorphia. Accordingly, structutral characteristics which are found in the acrosomal vesicle, four mitochondria in the sperm midpiece and the appearance of the satellite fibers near the distal centriole of C. (S.) swiftii in Pectinidae (subclass Pteriomorphia), can be employed for phylogenetic and taxonomic analyses as taxonomic key or a significant tool.

• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.1-9
• /
• 2016

Characterization of the UV oxidation for raw natural rubber (NR) was investigated in controlled conditions through image and FT-IR analysis. The UV oxidation was performed on a thin film of natural rubber coated on a KBr window at 254 nm and room temperature to exclude the thermal oxidation. Before or after exposure to UV light, image of the NR thin film was observed at a right or tilted angle. FT-IR absorption spectra were measured in transmission mode with the UV irradiation time. The UV oxidation of NR was examined by the changes of absorption peaks at 3425, 1717, 1084, 1477, 1377, and $833cm^{-1}$ which were assigned to hydroxyl group (-OH), carbonyl group (-C=O), carbon-oxygen bond (-C-O), methylene group $(-CH_2-)$, methyl group $(-CH_3)$, and cis-methine group $(cis-CCH_3=CH-)$, respectively. During the initial exposure period, the results indicated that the appearance of carbonyl group was directly related to the reduction of cis-methine group containing carbon-carbon double bond (-C=C-). Most of aldehydes or ketones from carbon-carbon double bonds were formed very fast by chain scission. A lot of long wide cracks with one orientation at regular intervals which resulted in consecutive chain scission were observed by image analysis. During all exposure periods, on the other hand, it was considered that the continuous increment of hydroxyl and carbonyl group was closely related to the decrement of methylene and methyl group in the allylic position. Therefore, two possible mechanisms for the UV oxidation of NR were suggested.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.34-44
• /
• 2001

Forward modeling by construction of synthetic data is usually practiced in a horizontal surface and a few subsurface structures. However, in-situ surveys often take place in such topographic changes that the corrupted field data always make it difficult to interpret the right signals. To examine the propagation characteristic of elastic waves on the irregular surface, a general mesh generation code for finite element method was modified to consider the topography. By implementing this algorithm, the time domain modeling was practiced in some models with surface topography such as mound, channel, etc. The synthetic data obtained by receivers placed on surface also agreed with the analytic solution. The snapshots showing the total wave-field revealed the propagation characteristic of the elastic waves through complex subsurface structures and helped to identify the signals on the time traces. The transmission of Rayleigh waves along the surface, compressive waves, and sheer waves was observed. Moreover, it turned out that the Rayleigh waves behave like a new source at the edge.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.39-44
• /
• 2010

In LTE-Advanced systems, every sector uses the entire range of the frequency resource, and when the UEs are located at a cell edge, user throughputs degrade due to the interferences from the adjacent cells. In this paper, we propose a combined scheme for inter-cell interference avoidance and power control. In the proposed algorithm, the sectors consist of the right edge, the left edge and the center for resource allocation and we control the transmission power to improve the user throughputs at the edge of each cell. Using a system level simulation, we analyze low 5th percentile and average user throughputs of the UEs who are located the cell, center and edge when the inter-cell interference avoidance and the power control are combined.

• Journal of Information Technology and Architecture
• /
• v.10 no.1
• /
• pp.63-70
• /
• 2013

This paper deals with the trend analysis and the patent prior-art for wireless rechargeable technology. By this technological analysis, the corresponding service applications and the strategy upon the mobile smart phone regarding the design UX/UI and several wireless rechargeable technology have been derived. The market outlook on the wireless rechargeable technology grows rapidly so that the market size is increased about six times bigger than that of the last year, and it will grow about 18 billion dollars in 2014. Because of that, as the interest on this area outfocused, many kinds of technology and new product are being exploited in this field. So the technological guidance and the patent map for the wireless rechargeable technology will highly expected. Especially due to our analysis, research and development about service application of this technology is one of the most promising areas, and several technological suggestions are represented which include the patentability and invalidation, right strategy and licensing policy, and battery sharing with extended durability, etc.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.35-40
• /
• 2008

This paper proposes a dual-band balun which is based on Wilkinson power divider. By inserting $\lambda/2$ transmission line between port 2 and 3, this balun shows good matching at all ports and improved isolation. We use matamaterial(CRLH, D-CRLH) structure for a miniaturization of the circuit implementation and dual-band operation at TDMB frequency range(195MHz) and DVB-H frequency range(670MHz). The proposed balun is designed with return loss larger than -12.98dB at all port, and isolation larger than -12.4dB, the amplitude imbalance between output signals less than 0.08dB, also phase differences of outputs less than $2.8^{\circ}$.