• The Korean Journal of Physiology
• /
• v.26 no.2
• /
• pp.143-150
• /
• 1992

The purpose of this study is to obtain the effective concentration of capsaicin to relieve pain with no change in the number of C-fibers and its effective duration for pain relief. Capsaicin has been used extremely as a experimental tool and as topical medications for acute or chronic tissue injuries and partial nerve injury is the main cause of causalgiform pain disorders in humans. Here, the left sciatic nerve was ligated unilaterally at the high level of the thigh to prepare an animal model of this pain condition. The rat developed guarding behavior of the ipsilateral hind paw within a few hours after the operation and this behavior was maintained for several months thereafter, suggesting the possibility of spontaneous pain. These animals were divided into two groups(4-week & 8-week) and each group was subdivided into five groups by different concentration (0.05, 0.1, 0.5, 1.0 & 2.0%). Each capsaicin concentration was treated locally on the spinal cord-side of the ligated nerve and the foot withdrawal latency was measured. Thereafter, the dorsal roots of L5 were removed from both sides immediately after in tracardial perfusion for the counting of C-fibers by the histological procedure. There were no significant differences in the foot-withdrawal latency and the number of C-fibers between the left side treated with 0.05% capsaicin and the right side treated with the vehicle. However, latencies of the left sides treated with 0.1, 0.5, and 1.0% capsaicin increased significantly throughout 4-6 weeks with almost no change in the number of C-fibers, and the latencies showed the trends to approach slowly to those of the conditions after operation. The latency of subgroup treated with 2.0% increased by approximate 10% more than that of the right side throughout 8 weeks, and the number of C-fibers decreased by about 30% or more These results suggest that the elevated latency with capsaicin(0.1-1.0%) treatment is due to the inhibition of impulse transmission throughout the primary afferent fiber and the data from 2.0% are due to partial destruction of C-fibers. Therefore, capsaicin concentrations from 0.1% to 1.0% are probably very effective for the treatment of causalgiform pain with almost no destruction of C-fibers.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.121-128
• /
• 2005

Tho existing TCP(Transmission Control Protocol) is known to be unsuitable for a network with the characteristics of high RDP(Bandwidth-Delay Product) because of the fixed small or large buffer size at the TCP sender and receiver. Thus, some trial cases of adjusting the buffer sizes automatically with respect to network condition have been proposed to improve the end-to-end TCP throughput. ATBT(Automatic TCP fluffer Tuning) attempts to assure the buffer size of TCP sender according to its current congestion window size but the ATBT assumes that the buffer size of TCP receiver is maximum value that operating system defines. In DRS(Dynamic Right Sizing), by estimating the TCP arrival data of two times the amount TCP data received previously, the TCP receiver simply reserves the buffer size for the next arrival, accordingly. However, we do not need to reserve exactly two times of buffer size because of the possibility of TCP segment loss. We propose an efficient TCP buffer tuning technique(called TBT-PLR: TCP buffer tuning algorithm based on packet loss ratio) since we adopt the ATBT mechanism and the TBT-PLR mechanism for the TCP sender and the TCP receiver, respectively. For the purpose of testing the actual TCP performance, we implemented our TBT-PLR by modifying the linux kernel version 2.4.18 and evaluated the TCP performance by comparing TBT-PLR with the TCP schemes of the fixed buffer size. As a result, more balanced usage among TCP connections was obtained.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.549-558
• /
• 2012

A topology optimization method for phononic crystals is developed for the design of sound barriers, using the level set approach. Given a frequency and an incident wave to the phononic crystals, an optimal shape of periodic inclusions is found by minimizing the norm of transmittance. In a sound field including scattering bodies, an acoustic wave can be refracted on the obstacle boundaries, which enables to control acoustic performance by taking the shape of inclusions as the design variables. In this research, we consider a layered structure which is composed of inclusions arranged periodically in horizontal direction while finite inclusions are distributed in vertical direction. Due to the periodicity of inclusions, a unit cell can be considered to analyze the wave propagation together with proper boundary conditions which are imposed on the left and right edges of the unit cell using the Bloch theorem. The boundary conditions for the lower and the upper boundaries of unit cell are described by impedance matrices, which represent the transmission of waves between the layered structure and the semi-infinite external media. A level set method is employed to describe the topology and the shape of inclusions. In the level set method, the initial domain is kept fixed and its boundary is represented by an implicit moving boundary embedded in the level set function, which facilitates to handle complicated topological shape changes. Through several numerical examples, the applicability of the proposed method is demonstrated.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.2
• /
• pp.181-192
• /
• 2001

The purpose of this was to evaluate the level of knowledge about Hepatitis B and AIDS among dental hygiene students at six dental hygiene educational programs in nationwide, compare the findings to those of Song's study. 1703 dental hygiene students surveyed by mail and answered a questionnaire, using the questionnaire used developed by DiClemente el al., on Hepatitis B vaccination, antibody production, experience of unintentional needle stick injuries, experience of surgical operation and blood transfusion, personal risk factors for HBV and HIV, management of HBV and HIV postexposure management et al. The data indicated that dental hygiene students (79.0%) in this study had more HIV vaccination than dental hygiene(74.3%) in Song's study. As for recognition of antibody production after Hepatitis B vaccination, only 34.6% of respondents answered they knew having antibody production and 95% of respondents knew not having antibody production. Over one-half of the respondents (55%) answered they didn't even recognize having antibody production. 52.3 percent of dental hygiene students experienced unintentional needle stick injuries. The findings on the knowledge about Hepatitis B and AIDS were that dental hygienists (76.5 points) received higher mean score than those of dental hygiene students (71.0 points) and that the distribution of right answer rate also showed wider range in dental hygiene students (27.7~97.5%) than those of dental hygienist (41.2~99.5%). There were no statistical differences among dental hygiene education programs. Finding of this study support that the curriculum of dental hygiene program should include instruction on sources and methods of transmission of infectious diseases, risk of virus transmission in the workplace and principles of infection control. Furthermore, infection-control practices should be utilized routinely and their application to dental personnel, management of HBV and HIV postexposure management. Furthermore, for preventing the further spread of infectious diseases (HBV, HIV and AIDS${\cdots}$) caused by bloodborne viruses, imposing an obligation rather than recommendation on Hepatitis B vaccination to all dental personnel and routinely utilizing infection-control guidelines for all dental patients in dental practices (include dental educational programs) should be accomplished by coordination the government agency.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2004

In this paper, we proposed the image hiding method which decreases calculation amount by encrypt partial data using discrete wavelet transform and linear scale quantization which were adopted as the main technique for frequency transform in JPEG2000 standard. Also we used the chaotic system which has smaller calculation amount than other encryption algorithms and then dramatically decreased calculation amount. This method operates encryption process between quantization and entropy coding for preserving compression ratio of images and uses the subband selection method and the random changing method using the chaotic system. For ciphering the quantization index we use a novel image encryption algerian of cyclically shifted in the right or left direction and encrypts two quantization assignment method (Top-down/Reflection code), made change of data less. Also, suggested encryption method to JPEG2000 progressive transmission. The experiments have been performed with the proposed methods implemented in software for about 500 images. consequently, we are sure that the proposed are efficient image encryption methods to acquire the high encryption effect with small amount of encryption. It has been shown that there exits a relation of trade-off between the execution time and the effect of the encryption. It means that the proposed methods can be selectively used according to the application areas. Also, because the proposed methods are performed in the application layer, they are expected to be a good solution for the end-to-end security problem, which is appearing as one of the important problems in the networks with both wired and wireless sections.

• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.155-162
• /
• 1998

Ho-l66 was produced by neutron reaction in a reactor at the Korea Atomic Energy Institute (Taejon, Korea). Ho-l66 emits a high energy beta particles with a maximum energy of 1.85 MeV and small proportion of gamma rays (80 keV). Therefore, the radiation absorbed dose estimation could be based on the in-vivo quantification of the activity in tumors from the gamma camera images. Approximately 1 mCi of Ho-l66 in solution was mixed into the flood phantom and planar scintigraphic images were acquired with and without patient interposed between the phantom and scintillation camera. Transmission factor over an area of interest was calculated from the ratio of counts in selected regions of the two images described above. A dual-head gamma camera(Multispect2, Siemens, Hoffman Estates, IL, USA) equipped with medium energy collimators was utilized for imaging(80 keV${\pm}$10%). Fifty-nine year old female patient with hepatoma was enrolled into the therapeutic protocol after the informed consent obtained. Thirty millicuries(110MBq) of Ho-166-CHICO was injected into the right hepatic arterial branch supplying hepatoma. When the injection was completed, anterior and posterior scintigraphic views of the chest and pelvic regions were obtained for 3 successive days. Regions of interest (ROIs) were drawn over the organs in both the anterior and posterior views. The activity in those ROIs was estimated from geometric mean, calibration factor and transmission factors. Absorbed dose was calculated using the Marinelli formula and Medical Internal Radiation Dose (MIRD) schema. Tumor dose of the patient treated with 1110 MBq(30 mCi) Ho-l66 was calculated to be 179.7 Gy. Dose distribution to normal liver, spleen, lung and bone was 9.1, 10.3, 3.9, 5.0 % of the tumor dose respectively. In conclusion, tumor dose and absorbed dose to surrounding structures were calculated by daily external imaging after the Ho-l66 therapy for hepatoma. In order to limit the thresholding dose to each surrounding organ, absorbed dose calculation provides useful information.

• Corrosion Science and Technology
• /
• v.4 no.4
• /
• pp.155-163
• /
• 2005

Heavy duty coating are required to have minimum durable period of 15 years under average usage environment because these paints are coated with purpose of anti-corrosion, antifouling, plastering etc. Onto steel structures constructed upon land and sea and other ferrous structures of electric power generation plants, electricity transmission towers, large structures of various plants, etc. Therefore we tried to estimate heavy duty coating longevity through reliability evaluation method and used combined cyclic anti-conrrosion test method composed of drying, moisturizing and salt spray as for accelerated life test to estimate longevity. Accelerated life test hours to heavy duty coating of first grade (with longevity not less than 15 years) specification may be obtained from troubleless test hours $t_n=\frac{B_p}{n^{1/\beta}}\left[\frac{1n(1-CL)}{1n(1-p)} \right]^{1/\beta}=19.671$ (yr) where shape parameter $\beta=1.1$, confidence level CL=80 %, warranty life $B_{10}=15$ yr and sampling size n=10 (2 sets). Because acceleration factor {AF} found by accelerated test is 41.7, accelerated life test hours required may be represented about 4,132 hr so that if this amount of hours is converted to number of cycles(6 hr/cycle) of complex cycle corrosion resistance test then the amount is tantamount about 690 cycles. That means if there does not occur trouble failure (with defect factor sum not more than 20) during when there is performed 690 cycles of combined cyclic anti-corrosion test to heavy duty coating specimen then it signifies that there can be warranted longevity $B_{10}$ of 15 yr under condition of confidence level CL=80 %.

• Journal of Korean Physical Therapy Science
• /
• v.14 no.1_4
• /
• pp.11-23
• /
• 2007

This study was performed to evaluate the effects of low-intensity ultrasound application to the peripheral nerve injury animal model on enhancement of nerve regeneration and functional recovery. Using aseptic microsurgical techniques, the sciatic nerve of adult male Sprague-Dawley rats was crushed at the outside of right mid-thigh for 30 seconds with fine forceps. Beginning just after surgery, various continuous-wave ultrasound treatments with intensities of 0.2 W/$cm^2$, 0.5 W /$cm^2$ and 1.0 W /$cm^2$ operated at 1 MHz or sham treatment were applied to the opposite inside of the crush site for 1 minute every other day with a transducer moving speed of 2cm/sec. For evaluation of the progress of sciatic nerve regeneration, c-Fos expression in the lumbar spinal cord (L4-5) dorsal horn was investigated. c-fos expression was markedly increased at 1hour after sciatic nerve crush injury, then gradually decreased thereafter. The c-fos expressions were significantly decreased (p<0.05) in all the experimental groups in comparison with the control group until 3days post-crush, and the degrees of decrease were higher in 0.5 W/$cm^2$ and 1 W/$cm^2$ intensity ultrasound application groups. It is suggested that low-intensity ultrasound application to an animal model of sciatic crush injury may suppress pain transmission and promote nerve regeneration, and which may result in delayed progress of muscle atrophy and accelerated progress of muscle recovery and eventually may result in accelerated and improved foot function recovery.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.149-163
• /
• 2004

This study analyzed kinematic variables about the cross step, the delivery and the release for women's javelin athletics recorded over 50m in the 2004 Busan International Athletics Competition. It was used the Kwon3D Motion Analysis Package Ver. 3.1 Program(Kwon, 2000) for analysing the kinematic variables about the distance, the velocity, and the angle, then we had the results as follows; 1 In the Cross step phase, the COG velocity was low because their step length was short. To keep the CM velocity from the approach to the last cross over step contact, the athletes have to keep the longer step length within about 130% of the athletics' height. 2. In the Delivery phase, the athletics' COG height was gradually lower, and the deceleration of the COG was going up. As the same in the cross step, Therefore the athletes have to increase the step length within about 100% of their height, in order to increasing the COG velocity. And it was shown they have to make small angle of the elbow as possible from the right foot contact to the left foot contact in order to being the big acceleration of the upperarm at the release phase. 3. In the release phase, it was shown to being low position of the release point as the COG was low and then the release velocity of the upperarm was low. Specially when the shoulder lean lateral angle is big at the release phase, it was shown they have a excessive release angle. And, when it was shown the high rotation angle of the shoulder, the shoulder was opened forward bigger than the trunk was opened forward. So the transmission of velocity from the proximal segments was a fast change.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.85-89
• /
• 2011

In this paper, a novel Class-E power amplifier using metamaterials has been realized with one RF LDMOS diffusion metal-oxide-semiconductor field effect transistor. The CRLH structure can lead to metamaterial transmission line with the Class-E power amplifier tuning capability. The CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Also, the proposed power amplifier has been realized by using the CRLH structure in the output matching network for better efficiency. Operating frequencies are chosen at 13.56 MHz in this work. The measured results show that the output power of 39.83 dBm and the gain of 11.83dB was obtained. At this point, we have obtained the power-added efficiency (PAE) of 73 % at operation frequency.