• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1034-1041
• /
• 2012

In this paper, a compact circularly polarized metamaterial patch antenna using the -1 mode that is induced by the composit right-left handed(CRLH) transmission line is proposed. Basically, since the -1 mode is the same properties with the +1 mode of the conventional patch antenna, the circular polarization(CP) is realized. If two orthogonal -1 modes are excited with $90^{\circ}$ phase difference, the CP property can be obtained. In order to obtain two orthogonal modes and $90^{\circ}$ phase difference, 4 mushroom structures having the shape of triangle are employed and the inter-digital gaps are optimized, respectively. The fabricated antenna is based on RT/duroid5880 substrate and the total area of the 4 mushrooms is $0.161{\lambda}_0{\times}0.161{\lambda}_0$. It is confirmed that the center frequency of the proposed antenna is measured as 2.845 GHz and it operates from 2.830 GHz to 2.850 GHz. In addition, the antenna maintains the CP property from 2.842 GHz to 2.847 GHz at the peak gain and the measured radiation efficiency is 46 %.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.517-534
• /
• 1997

It has been held that excessive mechanical forces to the osseous and soft tissues of the TMJ result in joint dysfunction. Understanding the stress pattern on TMJ is very important in TMJ research. But, it is very difficult to measure directly the biomechanical stress distribution in the TMJ when the mandible is loaded. Therefore, stress distribution in the TMJ during functional movement was studied through animal experiment or mathematical model. It was observed and compared the stress distribution occuring in the working and balancing condyle when lower right canine, lower right first molar and lower right second molar were clenched by the three dimensional finite element analysis. Also, stress distribution in the working and balancing condyles were observed and compared when $20^{\circ}$ forward and buccal bite forces were applied to the first molar. The results were as follows : 1. Stress distribution in the condyles during unilateral clenching of the first molar, second molar, canine showed no difference. In the working condyle, tensile force was concentrated on the lateral aspect of the condylar articular surface and condylar neck. And compressive force was concentrated on the anteromedial and lateral aspect of condyle. In the balancing condyle, tensile and compressive forces were concentrated on the lateral aspect of the condylar articular surface and stress transmission to the temporal bone was not observed. 2. When lateral forces were applied to the first molar, tensile forces were concentrated on the medial aspect of the condylar neck and condylar posterior surface in working and balancing condyle. Compressive force was concentrated on the anteromedial and lateral surface of the condyle and stress transmission to the temporal bone was not observed. 3. During unilateral clenching, stress in the working condyle decreased as the occlusal load moved posteriorly while the stress in the balancing condyle increased. when lateral force was applied to first molar, the incremental amount of stress was greater than vertical load. 4. During unilateral clenching, the average balancing/working condyle stress ratio was 2.52. There was a greater concentration of stress in the balancing condyle. The ratio increased as the occlusal load moved posteriorly and decreased considerably when lateral forces were applied to the first molar.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.5 no.1
• /
• pp.65-79
• /
• 1997

In this study, we deviced side warning system that is necessary to the ground operation of aircraft. The system consist of obstacle detection part, transmission part, receive part, and warning part. We used TOF(Time Of Flight) method using 40kHz ultrasonic wave as the obstacle detection part. The 447MHz RF module was applied to the transmission and receive part. The warning part is activated by the computer using received distance data. The detection system attach to the left/right side edge of main wing and horizontal stabilizer. We have decided 10m obstacle detection range. The result of experiment was satisfactory.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.371-375
• /
• 2014

In this paper, we compared the performances of the Right Handed Transmission Line (RHTL) and the Left Handed Transmission Line (LHTL) phase shifters as a frequency translator. Unlike other phase shifters, both phase shifters show a $0^{\circ}-360^{\circ}$ phase variation for a broadband frequency and compact in size which are ideal to use as a frequency translator. For the performance comparison, we fabricated both a RHTL and a LHTL phase shifter to cover 1.5 GHz - 2.4 GHz range with the whole $360^{\circ}$ phase variation. For the frequency range, a LHTL based frequency translator showed a much better performance whose Spurious Free Dynamic Range (SFDR) is 4dB - 17dB higher than the RHTL based frequency translator when the sawtooth modulation freqncy is 11 kHz. This is due to the linear phase-voltage variation of LHTL phase shifter. Furthermore, the LHTL phase shifter shows a less insertion loss and a insertion loss variation than the RHTL phase shifter. Overall, the LHTL based frequency translator outperformed RHTL based freqency translator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.254-262
• /
• 1996

In this paper, we present a polarizer that consists of three step rotary detents which can selectively convert linear polarzation into circular polarization and vice versa. For the design of the polarizer, the transmission line theory is applied to design the wa- veguide mode transducer for the modes to be smothly converted in waveguides, and a dielectric plate is inserted in circular waveguide for the conversion of a polarized wave with the angle of an inserted dielectric plate. Also, we simulated to obtain the optimum values of the transmission and the reflection coefficient characteristics at input and output port, and proved the propriety of the theory from the knowledge of measuring the constructed polarizer with the designed data.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.295-301
• /
• 2006

The scope ID field of IPv6 multicast address indicates the zone of the destination for which a multicast traffic is intended. Without any further examination on the header field, the scope ID enables a router to determine whether the traffic will be forwarded to a subnet or not. For the graceful migration from IPv4 networks to IPv6 networks, various IPv6 applications working through IPv4 networks are indispensable during the migration period. This paper describes development of an interactive remote lecture system providing service integration on voice, image, and data of teaching materials. Access right to the network for dialog among multicast group members is controlled via additional TCP (Transmission Control Protocol) session. A jitter buffer algorithm was implemented to improve the voice communication jitters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1501-1505
• /
• 2004

The authentication system of high-speed internet in IP-infra is not warm enough to administration of systematic authentication information for user's legalization, connection right and resources allocation in order to both methods of authentication-unauthentication connection system according to transmission method . Also unauthentication connection raises a difficulty condition to user's needs satisfaction in order to a load weighting of system and network and a drop of transmission speed. Accordingly, this study brings forth authentication system construction in a high-speed IP infrastructure using spam sever able to construct the suitable network condition according to unifying authentication-unauthentication system for single authentication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.666-673
• /
• 2006

In this paper, we evaluated the performance of 4 types of ARQ algorithms that have been adopted to offer reliable transmission between MAC layers. First of all, we implemented IEEE 802.16 ARQ algorithms with NS-2 network simulator and then evaluated the performances in various channel states. We used two performance measures to evaluate those performances. First, we used the total number of ARQ block in bytes that have been received without error. Second, we used ACK_Efficiency that is newly defined in this paper. From the results of simulation, we could be aware that each ARQ algorithm has different performance in a various channel states. For improving the transmission data rate in a specific channel state, we have to choose the right ACK interval as well as a suitable ARQ algorithm.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.45-49
• /
• 2001

Korean government and companies have given a lot of their efforts to exchange electronic documents between themselves and their partners. As the results of them. Korean EDI standards were made by Korean EDIFACT Committee and the standards have been used by companies and governmental organization in Korea. However, Korean export customs clearance EDI system is based on VAN(Value Added Network) and one VAN company ha monopolistic right to relay EDI documents to Korean Customs Service. Therefor is leads to a lot of problems such as inconvenient software, expensive transmission fee and the difficulty of connection with the in-house systems of user companies. To solve these problems, a few good solutions and systems have been suggested and one of them is the Internet EDI. we will suggest a new export customs clearance EDI system running on the Web. This system is basically an Internet EDI system, but we have developed this system using XML instead of HTML, XML is a new markup language with merit such as isolating data from style of documents. This system consists of 7 modules, schema/style/template management, XML/EDI document management, XML/EDI transformation, EDI transmission, certification management and log management. Also this system can be used with other traditional EDI systems that have UN/EDIFACT standards. We will discuss the advantages and disadvantages of XML/EDI system for customs clearance. The development of this system will be a leading study for XML/EDI standards in export clearance EDI system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.92-96
• /
• 2011

In this paper, we present a bandpass filter (BPF) based on composite right-/left-handed (CRLH) structure for improving the linearity of the power amplifier. The proposed BPF consist of the inter-digit signal line on the top plane and the complementary split ring resonator (CSRR) on the bottom plane, respectively. The insertion loss is minimized at operation frequency and the 2nd harmonic is suppressed by the bandpass filter using the CRLH structure, respectively. The output power of 33 dBm, the 2nd harmonic of -53.527 dBc, 3rd inter-modulation distortion of -36.16 dBc was obtained at 2.14 GHz, respectively. Compared with the reference power amplifier, the 2nd harmonic of 16 dB and 3rd inter-modulation distortion of 12 dB have been improved at 2.14 GHz, respectively.