• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1146-1158
• /
• 1993

In this paper, parallel scrambling techniques are considered for practical use in the SDH transmission and the ATM transmission. In the ATM transmission, there are two ways of transmitting ATM cells - the SDH-based and the cell-based - and the corresponding scrambling techniques differ accordingly. For the SDH transmission and the SDH-based ATM transmission, the FSS (frame synchronous scrambling) is applied to the STM frames : while for the cell-based ATM trans-mission, the DSS(distributed sample scrambling) is used on the ATM cell stream. The parallel scrambling techniques are examined for the FSS and the DSS, and applied to achieve the parallel FSSs for use in the SDH and the SDH-based ATM transmission along with the parallel DSS applicable to the cell-based ATM transmission. The resulting(8, 4) PSRG(parallel shift resister generator) and (8, 16) PSRG based parallel scramblings are directly applicable for the STM-1 rate processing of the STM-4 and STM-16 scramblings, respectively. Likewise, the resulting (1, 8)PSRG and double-sampling-double-correction based parallel scrambling techniques can be practically used for a low-rate processing of the SDH-based and the cell-based ATM signal scrambling respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.425-445
• /
• 2013

The IEEE 802.11 compliant stations can transmit at multiple transmission rates. Selection of an appropriate transmission rate plays a significant role in determining the overall efficiency of a communication system. The technique which determines the channel state information and accordingly selects an appropriate transmission rate is called rate-adaptation protocol. The IEEE 802.11 standard does not provide standard specification for implementing a rate-adaptation protocol for its multi-rate capable wireless stations. Due to the lack of standard specification, there is a myriad of rate-adaptation protocols, proposed by industry and various research institutes. This paper surveys the existing rate-adaptation schemes, discusses various features which contribute significantly in the process of rate-adaptation, the timing constraints on such schemes, and the performance gains in terms of throughput, delay and energy efficiency; which can be gained by the use of rate-adaptation. The paper also discusses the implication of rate-adaptation schemes on the performance of overall communication and identifies existing research challenges in the design of rate-adaptation schemes.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.462-470
• /
• 2005

We propose a multi-rate and multi-BEP transmission scheme using adaptive overlapping pulse-position modulator (OPPM) and optical power controller in optical code division multiple access (CDMA) networks. The proposed system achieves the multi-rate and multi-BEP transmission by accommodating users with different values of OPPM parameter and transmitted power in the same network. The proposed scheme has advantages that the system is not required to change the code length and number of weight depending on the required bit rate of a user and the difference of bit rates does not have so much effect on the bit error probabilities (BEPs). Moreover, the difference of transmitted powers does not cause the change of bit rate. We analyze the BEPs of the four multimedia service classes corresponding to the com­binations of high/low-rates and low/high-BEPs and show that the proposed scheme can easily achieve distinct differentiation of the service classes with the simple system configuration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.973-980
• /
• 2005

In this paper, we analyze previous flow control algorithm for serving ABR traffic, and then propose the algorithm which calculate fair transmission rate and control efficiently ABR traffic using VS/VD switch which has an effect on PNNI environment with long delay. For getting the transmission rate, the proposed algorithm use FMMRA as ER scheme which calculate exactly the fair share. And, in large delay state, we can obtain fair cell sharing by calculating transmission rates which obtained by transmitted queue length information of VD to VS for serve and drain cell in queue Through the computer simulation, we evaluate the performance of proposed algorithm. According to the results, the proposed algorithm shows good performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1413-1421
• /
• 2000

In this paper, we analyze previous flow control algorithm for serving ABR traffic, and then propose the algorithm which calculate fair transmission rate and control efficiently ABR traffic using VS/VD switch which has an effect on WAN environment with long delay. For getting the transmission rate, the proposed algorithm use FMMAR as ER scheme which calculate exactly the fair share. And, in large delay state. we can obtain fair cell sharing by calculating transmission rates which obtained by transmitted queue length information of VD to VS for serve and drain cell in queue Through the computer simulation, we evaluate the performance of proposed algorithm. According to the results, the proposed algorithm shows good performance.

• Journal of Korea Multimedia Society
• /
• v.8 no.9
• /
• pp.1216-1226
• /
• 2005

In this paper, a preventive transmission rate decision algorithm, called PTRD, is proposed for the transmission of live video over networks with dynamic bandwidth allocation capability. Frame analyzer predicts the bit-rates of future frames before encoding by analyzing the source information such as spatial variances and the degree of scene changes. By using the predicted bit-rates, transmission rate bounds are derived from the constraints of encoder and decoder buffers. To resolve the problem of renegotiation cost increment due to frequent renegotiations, the PTRD algorithm is presented to decide transmission rates considering the elapsed time after the recent renegotiation and the perceived video quality. From the simulation results, compared to the normalized LMS based method, PTRD is shown to achieve high channel utilization with low renegotiation cost and no delay violation.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.59-66
• /
• 2004

In this paper, we propose a transmission rate prediction method of video data. The proposed method checks shot transition characteristics after dividing MPEG video data into a GoP unit and then uses Kalman filter. It used algorithm to detect shot transition information by high speed in compressed domain in order to check a correct shot transition of video data and classified into a abrupt shot transition type and a gradual shot transition type. Information to have been classifying is used as factors of Kalman filter and predicts a transmission rate of video data. Also, the proposed method decreased processing time with detecting shot transition and predicting a transmission rate of video data in compressed domain. It predicted a transmission rate with 96.2- 97.6% in the experiment that used three kinds of 911 1frames of different video data.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.51-53
• /
• 2006

This paper proposes a portable ECG monitoring system, which integrates uptodate PDA and RF communication technology. The aim of the study is to acquire the subject's biomedical signal without any constraint. It has two types of transmission mode, which are total signal transmission mode and HR(heart rate)/SC(step count) transmission mode. In audition, wireless communication technology uses Zigbee Wireless PAN and can work in low-power mode, which is one of the advantages of ZiBbee communication technology. The developed system is composed of a transmitter and a receiver. The transmitter has three-axial acceleration sensor. ECG amplifier and Zigbee communication controller. In total signal transmission mode, it can send data 50 packets per second whose transmission speed corresponds to 300 ECG samples and 60 acceleration samples. In HR/SG transmission mode, it can calculate heart rate from EEG data with 216 samples per second and step count from acceleration data and send a packet every cardiac cycle. The receiver forwards the received data to PDA, where the data can be stored and displayed. Therefore, the developed device enables to continuous monitoring for Activities of Daily Living(ADL). Also, this method will reduce medical costs in the aged society.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.872-882
• /
• 2006

The Wireless Mesh Network uses a wireless communication technology with transmission rates similar to that of a cable, which is used as a backbone network. The topology structure is in a Mesh form which resembles an Ad-hoc network, however a metric is needed in order to set the channel and channel methods since the operation intentions and interior motions are different. This thesis proposes a metric(ETR : Expected Transmission Rate) that sets the channel with physical link performance and multi hop transmission capabilities. This metric will also be based on multi channel creation methods and Hop-by-hop routing techniques for an effective multi hop transmission with no loops.