• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.892-897
• /
• 2003

This study deals with the performance of a simplified test apparatus for measurement of sound insulation of panels. In order to investigate its performance, results from experiment and theory of the sound transmission loss for single and double panels are compared. Comparative results show that in evaluation of the sound insulation performance, the test apparatus has a cumbersome problem at the low frequency region, i.e. below 315 ㎐, presumably because of the poor diffuse sound field in the chambers. Meanwhile at the high frequency, it shows a considerable results comparable to the theoretical prediction. One of the objective of this study that compares measured results between a real reverberation chamber and a simplified test apparatus, by using a specimen of a sandwich panel. It shows qualitatively resonable agreement from which one can find a potential to provide a design tool.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.25-34
• /
• 2011

In this paper, In this paper, we propose a Cooperative Routing Protocol (CooRP) for supporting network convergence and transmission services efficiently in mobile ad-hoc wireless sensor networks with Rayleigh fading environments. The main contributions and features of this paper are as follows. First, the routing routes are decided on route stability based on entropy concepts using mobility of nodes within the direction guided line region to increase the operational lifetime of routes as well as reduce control overhead for route construction. Second, a cooperative data transmission strategy based on the constructed stable routing route is used to increase packet delivery ratio with advanced SNR. Third, a theoretical analysis for cooperative data transmission of the proposed CooRP with outage probability is presented. The performance evaluation of the proposed CooRP is performed via simulation using OPNET and analysis. The results of performance evaluation show that the proposed CooRP by using stable routing routes and cooperative transmission can increase packet delivery ratio efficiently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1805-1811
• /
• 2005

We analyzed of the receiver which received OOK and the FSK transmission signal that were a general digital transmission technique in a WDM system. We expressed various error probability with the m which was bandwidth and a bit numerical function and carried out performance evaluation of a receiver in a performance evaluation way. When error probability was $10^{-4}$ which is m=10, as for the receive sensitivity of OOK, the $1.7{\times}10^2$, FSK got $2.2{\times}10^2$ through simulation. And the receive sensitivity of OOK and FSK was able to get each $2.15{\times}10^2$ and $3.07{\times}10^2$ when it was error probability of $10^{-9}$ which is m = 25. Transmission of 23Gb/S showed that it was possible when we does the $10^{-9}$ that was basis error probability of a light communication system with a basis through this, and a coding profit was with for and transmission capacity of 75Gb/s confirmed that it was possible if a code rate was with 0.8.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.680-686
• /
• 2005

This paper introduces the robust design of an intake system using transmission loss and the frequency weighting function. First, transmission loss is measured to evaluate the performance of the noise reduction for the intake system. The robust design parameters of the intake system are extracted by adapting a cost function with the Taguchi method. Subsequently, the frequency weighting function is developed by the subjective evaluation in which 6 special engineers were participated. Finally, the comparison between the proposed frequency weighted optimal design and unweighted optimal design for the transmission loss as the part is performed. Here, the overall levels of the transmission loss according to the methods are presented to validate the effectiveness of the proposed methodology.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2007

In mobile ad-hoc wireless networks, one of the most important challenging issues is how to conserve energy, maximizing the lifetime of route(networks) in the view points of both power and mobility of nodes. However, many transmission methods presented in the previous works can not satisfy these two objectives simultaneously. To obtain these two goals, in this paper we propose an architecture to support power saving transmission services with route stability in mobile ad-hoc wireless networks. The proposed architecture consists of two parts, the underlying route stability method to support route(network) lifetime and the power saving transmission methods. The performance evaluation of the proposed architecture is achieved via simulation and analysis.

• International Journal of Contents
• /
• v.14 no.2
• /
• pp.1-6
• /
• 2018

In a wireless mobile communication system, a pilot signal has been considered to be a necessary signal for estimating a changing channel between a base station and a terminal. All mobile communication systems developed so far have a specification for transmitting pilot signals. However, although the pilot signal transmission is easy to estimate the channel,(Ed: unclear wording: it is easy to use the pilot signal transmission to estimate the channel?) it should be minimized because it uses radio resources for data transmission. In this paper, we propose a pilotless channel estimation scheme (PCE) by introducing the clustering method of unsupervised learning used in our deep learning into channel estimation.(Ed: highlight- unclear) The PCE estimates the channel using only the data symbols without using the pilot signal at all. Also, to apply PCE to a real system, we evaluated the performance of PCE based on the resource block (RB), which is a resource allocation unit used in LTE. According to the results of this study, the PCE always provides a better mean square error (MSE) performance than the least square estimator using pilots, although it does not use the pilot signal at all. The MSE performance of the PCE is affected by the number of data symbols used and the frequency selectivity of the channel. In this paper, we provide simulation results considering various effects(Ed: unclear, clarify).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.179-186
• /
• 2013

PACS is a medical system for digital medical images, and PACS expand to web-based service using public network, DICOM files should be protected from the man-in-the-middle attack because they have personal medical record. To solve the problem, we designed flexible secure transmission system using IPSec and adopted to a web-based three-dimensional medical image system. And next, we performed the performance evaluation changing integrity and encryption algorithm using DICOM volume dataset. At that time, combinations of the algorithm was 'DES-MD5', 'DES-SHA1', '3DES-MD5', and '3DES-SHA1, and the experiment was performed on our test-bed. In experimental result, the overall performance was affected by encryption algorithms than integrity algorithms, DES was approximately 50% of throughput degradation and 3DES was about to 65% of throughput degradation. Also when DICOM volume dataset was transmitted using secure transmission system, the network performance degradation had shown because of increased packet overhead. As a result, server and network performance degradation occurs for secure transmission system by ensuring the secure exchange of messages. Thus, if the secure transmission system adopted to the medical images that should be protected, it could solve server performance gradation and compose secure web PACS.

• Journal of Internet of Things and Convergence
• /
• v.9 no.2
• /
• pp.11-17
• /
• 2023

Smoothing is to creating a transmission plan consisting of sections of frames that can be sent at the same transmission rate for compressed and stored video data. Various algorithms have been studied for the smoothing to minimize the number of transmission rate changes, the number of transmission rate changes, and the amount of transmission rate increase. This study evaluates the performance of a smoothing algorithm that minimizes the increase in transmission rates and maximizes the increase in transmission rates when the transmission rate is required to maximize the excess bandwidth to be secured by the server in an environment with limited server bandwidth. The available transmission rates and buffer sizes available in the server are set in various ways and evaluated by the number of fps changes, the minimum fps, the average fps, and fps variability. As a result of the comparison, the proposed algorithm showed excellent average fps and fps variability.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.496-502
• /
• 2017

The purpose of this study is to investigate the applicability of surface-wave techniques for the evaluation of the crack-repairing performance of an epoxy injection method in concrete. In this study, box-shaped concrete specimens with four different crack depths were made with identical mix proportions. The specimens with different crack depths were completely repaired using the same epoxy injection method. The spectral energy transmission ratio of surface waves is used as an index to differentiate the effects of crack depth and crack-repairing performance. The decrease of spectral energy transmission ratio in accordance with the increase of crack depth was identified before repairing. Furthermore, the spectral energy transmission ratio increased after the crack-repairing process in all specimens. The spectral energy transmission ratio is considered as a great indicator for estimating the crack-repairing performance of the epoxy injection method; the ratio was recovered up to almost 95% of the uncracked condition.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.156-163
• /
• 2005

In this paper, we analyzed the performance of VDL mode 3 system model whose specification is defined by ICAO(International Civil Aviation Organization). For performance evaluation, we obtained BER(Bit Error Rate), transmission delay time, burst retransmission rate and throughput. From the analysis result, we could explicitly define relationships among BER, transmission delay time, throughput and burst restransmission rate. In addition, it became known that V/D retransmission rate and throughput are closely related in down link channel.