• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.213-221
• /
• 2009

The time reversal mirror (TRM) method for underwater communications has been developed to improve transmission performance with low complexity. However, digital communication parameters for TRM have not been researched deeply. This paper demonstrates that the TRM scheme obtains spatial diversity gain similar to multiple antennas, and proposes design methodologies of symbol interval, frame duration and transmission protocol for time reversal mirror transmission. Simulation results show that spatial diversity gain is achieved and the effect of ISI decreases as the number of transducer increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1192-1199
• /
• 2003

In this paper, we investigate the effect of pulse repetition frequency (PRF) and slot interval on the throughput performance of the ultra wide band (UWB) wireless communication system in multi-path channels, and based on these observations, a data throughput control using PRF and slot interval is proposed for maximizing the effective throughput. Recently, due to many desirable features of the UWB system, it has drawn much attention especially for short-range high-speed data transmission. The UWB system has two parameters to determine its data throughput; pulse repetition frequency and slot interval. In the multi-path channel with additive white Gaussian noise, the UWB system suffers from the inter-pulse interference (IPI) and noise, which result in degradation of system performance. The UWB system can vary the two parameters to maintain and/or improve the system performance. In this paper, we demonstrate the effects of the two parameters on the data throughput of the UWB system in various multi-path indoor channels through computer simulation, and show that the variable data rate approach designed based on the observations is superior to the fixed data rate one in terms of effective throughput performance.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.545-551
• /
• 2004

CBTC(Communication Based Train Control) System can improve train operation efficiency by realizing moving block system which makes a continuous train interval control in accordance with the position and speed of train. Adopting radio transmission to make a continuous detection of train position and transmit the control data from the ground to a train, CBTC needs dedicated train operation and control algorithm which should be quite different from the conventional track-circuit-based train control system. This paper provides a train operation display and control algorithm for CBTC system in making train interval control, train route control and train supervision. Signalling pattern diagram is devised to analyze the train interval control mechanism of moving block system, and interlocking logic is devised to represent the train route control mechanism of moving block system. For train supervision, train occupation status on railway are displayed by using the segment which virtually divide the whole railway. The proposed method has been successfully applied to the development of CBTC system for the standardized AGT(automatic guided transit) which is under construction now in Korea, and also can be applied to any other CBTC system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.837-844
• /
• 2019

In this paper, we propose the AMBM(: Adaptive Multi-channel Backoff Machisum) -Mac protocol to provide high throughput for non-safety applications in VANET(: Vehicular Ad Hoc Networks) environment. The proposed protocol guarantees the quality of service of non-safety packets by dynamically adjusting CW(: Channel Window) of WSA(: WAVE Service Advertisement) to maximize throughput between non-safety packets of different priority. It also shows that allocating a large amount of time for channel coordination and time slot reservation for SC and dynamically adjusting CW and CCI as nodes increase to reduces transmission delay than IEEE 1609.9, C-MAC(: Coordinated multi-channel MAC, and Q-VCI(: QoS Variable CCH Interval) protocols.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.430-436
• /
• 2007

An OFDM/offset QAM (OQAM)-IOTA system uses the isotropic orthogonal transform algorithm (IOTA) function, which has good localization properties in the time and frequency domains. This is employed instead of the guard interval used in a conventional OFDM/QAM system in order to be robust for multi-path channels. However, the conventional channel estimation scheme is not valid for an OFDM/OQAM-IOTA system due to the intrinsic inter-symbol interference of the IOTA function. In this paper, a condition is derived to reduce the intrinsic interference of the IOTA function. This condition is obtained with the proposed pilot structure used for perfect channel estimation. We also derive the preamble structure appropriate for practical channel estimation of the OFDM/OQAM-IOTA system. Simulation results show that the OFDM/OQAM-IOTA system with the proposed preamble structure performs better than the conventional OFDM system, and it has the additional advantage of an increased data transmission rate which corresponds to the guard interval retrieval.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.75-81
• /
• 2009

In this paper, USN of wireless communication with easy to install and effectiveness with variety information gathering has been proposed as a alternative of wired-based line for transmission of fire sensing data. But, The sensor node using USN should be considered for wireless transmission range and reliability of information. In this study, the zigbee protocol sensor node was implemented and then tested transmission range of sensor node as 10m interval using voltage information of DC 3V & 5V. Here, maximum transmission distance was confirmed 90m inside-outside. When used mesh routing relay node, distance was not limited. In USN network building, when fire sensing data transmitted, the sensing data same between direct sensing data from sensor and collecting data at USN. Therefore, was confirmed reliability for transmission range and information of proposed zigbee sensor node.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.582-587
• /
• 2012

Recently, the low-emissivity glass has been used to reduce the energy loss through building windows. However, it simply reduces the inflow of solar rays and has a relatively high heat transmission coefficient. To solve the problems, a high-efficiency vacuum glazing has been under development but it has not been actively used due to its high price and insufficient performance. In this paper, the effects of internal pressure, pillar (spacer) height, pillar diameter, pillar interval, emissivity etc. on the performance of vacuum glazing have been analyzed with three-dimensional computational fluid dynamics and structural analysis. As a result, the performance of vacuum glazing was predicted more accurately and major factors that determine the performance of vacuum glazing were optimized.

• Clinical and Experimental Pediatrics
• /
• v.51 no.7
• /
• pp.696-703
• /
• 2008

Korea is now classified as an area of intermediate endemicity for hepatitis B virus (HBV), due to the implementation of universal HBV vaccination and national preventive programs for HBV infection. A national program of HBV vaccination was launched in Korea in 1988 for school-going children and was listed on a vaccination guideline in 1991. In 1995, universal vaccination for newborn infants was started for the prevention of perinatal HBV transmission. The prevalence of HBsAg among Korean middle school students has shown marked decreased from 3.2% in the late 1990s to 0.44% in 2007. HBsAg positivity in preschool children was 0.9% in 1995, decreased to 0.2% in 2007 by national prevention program of hepatitis B vertical transmission, launched in 2002. Vaccine failure rate of HBV immunoprophylaxis is 4.2% by this program. The infected children should be monitored per 6-12 months interval. Lamivudine and interferon are approved therapies for children with chronic hepatitis B in immune-clearance phase in Korea.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.495-500
• /
• 2002

We propose a new estimation method for rate adjustment in the face of a packet loss in the TFRC protocol, a TCP-Friendly congestion control protocol for UDP flows. Previous methods respond in a sensitive way to a single packet loss, resulting in oscillatory transmission behavior. This is an undesirable for multimedia services demanding constant bandwidth. The proposed TFRC provides more smooth and fair (against TCP flows) transmission through collective response based on multiple packets loss events. We show our "Exponential smoothing method" performs better than known "Weight smoothing method" in terms of smoothness and fairness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.657-666
• /
• 2008

The intersection collision avoidance service among various telematics application services is regarded as one of the most critical services with regard to safety. In such safety applications, real-time, correct transmission of service is required. In this paper, we study on efficient infrastructure architecture for intersection collision avoidance using a cooperative mechanism between vehicles and wireless infrastructure. In particular, we propose an infrastructure, called CISN (Cooperative Infrastructure associated with Sensor Networks), in which proper numbers of sensor nodes are deployed on each road, surrounding the intersection. In the proposed architecture, overall service performance is influenced by various parameters consisting of the infrastructure, such as the number of deployed sensor nodes, radio range and broadcast interval of base station, and so on. In order to test the feasibility of the CISN model in advance, and to evaluate the correctness and real-time transmission ability, an intersection sensor deployment simulator is developed. Through various simulations on several environments, we identify optimal points of some critical parameters to build the most desirable CISN.