• Title/Summary/Keyword: Transmission Formula

Search Result 156, Processing Time 0.03 seconds

A Study on the Muscovite-Pyrophyllite Mixed Phase in the Shale from the Manhang Formation, Taebaek Area (태백지역 만항층 셰일에서 산출되는 백운모-파이로필라이트 혼합상에 대한 연구)

  • Choi, Seung-Hyun;Mun, Hyang-Ran;Lee, Young-Boo;Lee, Jung-Hoo
    • Journal of the Mineralogical Society of Korea
    • /
    • v.24 no.4
    • /
    • pp.313-320
    • /
    • 2011
  • Mica-type phyllosilicate particles in the shales of the Manhang formation at the Taeback area in the Kangwon Province were studied using electron probe microanalysis (EPMA) and transmission electron microscopy (TEM). The average chemical formula of the mica-type phyllosilicate mineral analysed by EPMA is $K_{1.35}(Fe_{0.18}Mg_{0.03}Al_{3.86})(Si_{6.55}Al_{1.45})O_{20}(OH)_4$. Low K contents compared to the ideal chemistry of muscovite indicate the presence of illite in the mica-type phyllosilicate particle. X-ray diffraction study showed that pyrophyllite commonly coexists with muscovite in the shales from the Manhang Formation. TEM observations showed both the interlayer and intralayer mixing of $9.3-{\AA}$ pyrophyllite and $10-{\AA}$ muscovite layers. The low K content of the mica-type phyllosilicates apparently come from the close mixing of pyrophyllite and muscovite.

Physiochemical Treatment of Feed and Utilization of Feed Additives to Control Salmonella in Poultry (가금의 살모넬라 제어를 위한 사료의 이화학적 처리와 사료첨가제의 활용)

  • Kim, Ji-Hyuk;Kim, Hack-Youn;Kim, Bong-Ki;Kim, Gye-Woong
    • Korean Journal of Poultry Science
    • /
    • v.45 no.1
    • /
    • pp.1-15
    • /
    • 2018
  • Salmonella infections in livestock industry cause various problems such as worsening animal welfare and productivity, damaging consumer confidence in the food safety of animal products. Chicken meat and eggs are known as major source of pathogen causing human foodborne infections. Therefore food safety concerns have prompted the poultry producers and governments to introduce the strategy and regulation to control these pathogens. Salmonella can persist for long periods of time in a wide range of spaces including feed bin, feed processing facilities, poultry farm, slaughterhouse, processing plants, etc. For the effective and constant Salmonella control, combination of pre-harvest, harvest and post-harvest measures should be considered comprehensively. The control measures would be most effective at farm level where the contamination initiates. Transmission of pathogen from feed origin to the live poultry and finally to the products was proven already. To control bacteria in the feed ingredients and formula feed, thermal processing, irradiation or chemical treatment may be applied. Chemical treatments to inhibit Salmonella in the feed involve the use of products containing organic acids, formaldehyde, or a combination of such compounds. However, recontamination which might occur during storage and transport process and/or by other various factors should always be under control and eliminated. Feed additives used to control Salmonella in birds' gastrointestinal track can be of various types, including prebiotics, probiotics, organic acids and bacteriophages. Although their mode of action varies, they ultimately inhibit the colonization of Salmonella in the gut and improve the performance of birds. This review describes the strategies that could be adapted to the management of feedstuffs and the use of feed additives in pre-harvest stage to control Salmonella contamination in poultry farming.

Measurement of electron density of atmospheric pressure Ar plasma jet by using Michelson interferometer

  • Lim, Jun-Sup;Hong, Young June;Choi, Eun Ha
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.195.1-195.1
    • /
    • 2016
  • Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

  • PDF

Morphological characterization of Symbiodinium minutum and S. psygmophilum belonging to clade B

  • Lee, Sung Yeon;Jeong, Hae Jin;Kang, Nam Seon;Jang, Tae Young;Jang, Se Hyeon;Lim, An Suk
    • ALGAE
    • /
    • v.29 no.4
    • /
    • pp.299-310
    • /
    • 2014
  • Dinoflagellates in the genus Symbiodinium are known as zooxanthellae and exist as either symbiotic or free-living forms. Among this genus, two species, Symbiodinium minutum and Symbiodinium psygmophilum, were recently established based on genetic characters. However, some critical morphological characters of these species, such as plate formulae and related diagnoses have not been provided yet. In this study, we analyzed the morphology of S. minutum and S. psygmophilum by scanning and transmission electron microscopy. The S. minutum had the Kofoidian plate formula consisting of a small plate (x), elongated amphiesmal vesicle (EAV), 4', 5a, 8", 7s, two cingulum rows, 18-20c, 6''', and 2'''', while S. psygmophilum had x, EAV, 4', 5a, 8", 7-10s, two cingulum rows, 20-22c, 5-6''', and 1''''. These plate formulae are different from any other reported Symbiodinium species. In addition, both species had a pentagonal 1a plate and a hexagonal 2a plate, while other known Symbiodinium species had a hexagonal 1a plate and a pentagonal 2a plate. Thus, we confirm the species status of S. minutum and S. psygmophilum based on morphological and genetic characters and report the detailed morphological characteristics of these two species.

A Same-Priority Collision-Avoidance Algorithm Using RTS/CTS Frame in IEEE 802.11e EDCA under Network Congested Condition (IEEE 802.11e EDCA 네트워크 혼잡 환경에서 RTS/CTS 프레임을 이용한 동일 우선순위 충돌 회피 알고리즘)

  • Kwon, YongHo;Rhee, Byung Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39C no.5
    • /
    • pp.425-432
    • /
    • 2014
  • The Enhanced Distributed Channel Access (EDCA) function of IEEE 802.11e standard defines contention window (CW) for different Access Category (AC) limits to support Quality-of-Service (QoS). However, it have been remained the problem that the collision probability of transmission is increasing in congested network. Several different solutions have been proposed but the collision occurs among same priority queue within the same station to compete the channel access. This paper presents an APCA (Advanced Priority Collision Avoidance) algorithm for EDCA that increases the throughput in saturated situation. The proposed algorithm use reserved field's bits of FC(Frame Control) using IEEE 802.11e standard's RTS/CTS (Request to Send / Clear to Send) mechanism to avoid data collision. The simulation results show that the proposed algorithm improves the performance of EDCA in packet loss. Using Jain's fairness index formula, we also prove that the proposed APCA algorithm achieves the better fairness than EDCA method under network congested condition.

Additional Data Transmission Scheme with Digital Watermarking Method in Generalized-K Fading Channel (일반화된 K 페이딩 채널에서 디지털 워터마킹 기법을 이용한 부가데이터 전송 기법)

  • Kim, Joo-Chan;Kim, Jin-Young
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.2
    • /
    • pp.39-44
    • /
    • 2010
  • In this paper, we derive the channel capacity in order to transmit an additional data by using digital watermarking method in generalized-K fading channel. Spread spectrum watermarking is one of the digital watermarking methods which is the most promising technique due to it's very robustness to the channel noise and easy achieving of the signal detection by correlators at the receiver. It is important to analyze the channel capacity to transmit an additional data through wireless channel because the transmitted data would be affected by the channel fading effects. From the results, we confirm that the channel capacity of the SSW system can be determined by the HWR, WNR, PN length and host sampling frequency. Also, we verified that the level of HWR and WNR can be determined by the derived capacity formula. The results of this paper can be applied to general spread spectrum watermarking system.

Link Design of VSAT Communication System for Low Speed Data Transmission (저속데이타 전송용 VSAT 통신시스템의 링크설계)

  • 장대익;최재익;김덕년
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.7
    • /
    • pp.1213-1223
    • /
    • 1994
  • VSATs(Very Small Aperture Terminals) have introduced new concepts in satellite business communications and are typically used in a star network configuration to provide information directly to the user`s premise. The characteristics of this system are low earth station costs, easy in stallation, compact, and very high flexibility for a varierty of applications (Credit Checks, Electronic Mail, Video Conferencing, Reservation System, Database Inquires, Order Entry, etc.). So, the requests of VSAT service have considerably enlarged. The link design of a VSAT network using Korea Sat. is discussed in this paper. This paper is intended to collect in a convient way the principle formula and reference data necessary to make overall performance calcurations and to calcurate antenna size. HPA power size and link margin of earth stations for satellite communications systems. Generally, because the antenna size of the Hub station in the VSAT system is bigger than the Remote station, the method of power allocations of inbound and outbound carriers is utilized in this paper. The size of Hub station and Remote station are assumed to be 3.7m and 1.2m. respectively.

  • PDF

Simulation of Dynamic EADs Jamming Performance against Tracking Radar in Presence of Airborne Platform

  • Rim, Jae-Won;Jung, Ki-Hwan;Koh, Il-Suek;Baek, Chung;Lee, Seungsoo;Choi, Seung-Ho
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.16 no.3
    • /
    • pp.475-483
    • /
    • 2015
  • We propose a numerical scheme to simulate the time-domain echo signals at tracking radar for a realistic scenario where an EAD (expendable active decoy) and an airborne target are both in dynamic states. On various scenarios where the target takes different maneuvers, the trajectories of the EAD ejected from the target are accurately calculated by solving 6-DOF (Degree-of-Freedom) equations of the motion for the EAD. At each sampling time of the echo signal, the locations of the EAD and the target are assumed to be fixed. Thus, the echo power from the EAD can be simply calculated by using the Friis transmission formula. The returned power from the target can be computed based on the pre-calculated scattering matrix of the target. In this paper, an IPO (iterative physical optics) method is used to construct the scattering matrix database of the target. The sinc function-interpolation formulation (sampling theorem) is applied to compute the scattering at any incidence angle from the database. A simulator is developed based on the proposed scheme to estimate the echo signals, which can consider the movement of the airborne target and EAD, also the scattering of the target and the RF specifications of the EAD. For applications, we consider the detection probability of the target in the presence of the EAD based on Monte Carlo simulation.

Experimental Analysis of 2-Dimensional Rolling Ftiction Occurred in Semi-Spherical CVT (구면무단변속기에서 발생하는 2 차원 구름 마찰력의 실험적 해석)

  • Kong Jinhyung;Yoon Youngmin;Lee Eung-shin;Lim Wonsik;Park Yeongi;Kim Dongjo;Lee Jangmoo
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.13 no.5
    • /
    • pp.134-141
    • /
    • 2005
  • Semi-Spherical Continuously Variable Transmission(SS-CVT) is the CVT which transmits power by rolling friction between dry metals, and its outstanding advantage is the ability of realizations of neutral, forward and reverse states without relying on any other devices. A spherical shaped variator transmits power and also changes gear ratio where keeping contact with a output disk. The frictional direction to transmit power and the other direction to change gear ratio are perpendicular to each other, so we can describe that two dimensional rolling friction is occurred in the contact point between the variator and the disk. Since magnitudes or relations of the two forces are completely unknown, they were analyzed by the experiments in this study. We determined the variables related with the friction phenomena by the dimensional analysis, and manufactured the SS-CVT test bench which could measure the related variables. Finally, the empirical formula for evaluating the two friction forces was proposed based on the experimental results.

A Novel Resource Scheduling Scheme for CoMP Systems

  • Zhou, Wen'an;Liu, Jianlong;Zhang, Yiyu;Yang, Chengyi;Yang, Xuhui
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.2
    • /
    • pp.650-669
    • /
    • 2017
  • Coordinated multiple points transmission and reception (CoMP) technology is used to mitigate the inter-cell interference, and increase cell average user normalized throughput and cell edge user normalized throughput. There are two kinds of radio resource schedule strategies in LTE-A/5G CoMP system, and they are called centralized scheduling strategy and distributed scheduling strategy. The regional centralized scheduling cannot solve interference of inter-region, and the distributed scheduling leads to worse efficiency in the utilize of resources. In this paper, a novel distributed scheduling scheme named 9-Cell alternate authorization (9-CAA) is proposed. In our scheme, time-domain resources are divided orthogonally by coloring theory for inter-region cooperation in 9-Cell scenario [6]. Then, we provide a formula based on 0-1 integer programming to get chromatic number in 9-CAA. Moreover, a feasible optimal chromatic number search algorithm named CNS-9CAA is proposed. In addition, this scheme is expanded to 3-Cell scenario, and name it 3-Cell alternate authorization (3-CAA). At last, simulation results indicate that 9/3-CAA scheme exceed All CU CoMP, 9/3C CU CoMP and DLC resource scheduling scheme in cell average user normalized throughput. Especially, compared with the non-CoMP scheme as a benchmark, the 9-CAA and 3-CAA have improved the edge user normalized throughput by 17.2% and 13.0% respectively.