• Wind and Structures
• /
• v.28 no.6
• /
• pp.381-388
• /
• 2019

This paper described the application of Geospatial Analysis in determining mean wind speed, $V_h$ for wind load calculation imposed to electrical transmission tower structural design. The basic wind speed data on available station obtained from Malaysian Meteorology Department is adjusted by considering terrain and ground roughness factor. The correlation between basic wind speed, terrain factor and ground roughness stated in EN-50341-1 is used to obtain the $V_h$ for overhead transmission line elements 50 m above ground. Terrain factor, $k_r$ and ground roughness, $z_0$ in this study are presented by land use types of study area. Wind load is then calculated by using equation stated in design code EN-50341-1 by using the adjusted mean wind speed. Scatter plots of $V_h$ for different $k_r$and $z_0$ are presented in this paper to see the effect of these parameters to the value of $V_h$. Geospatial analysis is used to represent the model of $V_h$. This model can be used to determine possible area that will subject to wind load which severe to the stability of transmission tower and transmission line.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.729-739
• /
• 2015

An algorithm for fault detection and classification method for wide-area protection in Korean transmission systems is proposed. The modeling of 345-kV and 765-kV Korean power system transmission networks using the Electro Magnetic Transient Program - Restructured Version (EMTP-RV) is presented and the algorithm for fault detection and classification in transmission lines is developed. The proposed algorithm uses the Wavelet Transform (WT) and Singular Value Decomposition (SVD). The Singular value of Approximation coefficient (SA) and part Sum of Detail coefficient (SD) are introduced. The characteristics of the SA and SD at the fault conditions are analyzed and used in the algorithm for fault detection and classification. The validation of the proposed algorithm is verified by various simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2267-2285
• /
• 2016

Information Centric Networking that uses content name instead of IP address as routing identifier can handle challenges such as traffic explosion and user mobility, but it also suffers from scalability and incompatibility problems. In this paper by combining the concept of software defined networking and Internet end to end arguments, we propose a wide area deployable software defined information centric networking service model named SD-ICN. SD-ICN employs a dual space structure that separates edge service network and core transmission network. The enhanced SDN techniques are used in edge service network in order to implement intelligent data routing and caching, while traditional IP technique is reserved in core transmission network so as to provide wide area high speed data transmission. Besides, a distributed name resolution system based on the cooperation of different controllers is also presented. The prototype experiments in our campus network show that SD-ICN can be deployed in a scalable and incremental way with no modification of the core network, and can support typical communication modes such as multicast, mobility, multihoming, load balancing, and multipath data transmission effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7A
• /
• pp.669-677
• /
• 2011

Superframe in IEEE 802.15.4 Standard is subdivided into an active period and an inactive period to reduce energy consumption. But communication nodes use same data transmission range in an active period, thus communication nodes spend a lot of energy to send data another nodes. In this paper, we proposed reduce energy consumption algorithm that nodes use different transmission power. Cordinator split transmission area into four group and transmit becon message to nodes. Nodes adjust transmission power according to becon message and wates lowe energy than normal nodes. We proposed energy-efficient cross layer protocol that have different PAN (Personal Area Network) by four range group.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1151-1158
• /
• 2014

In this paper, a concatenated frame algorighm for improving transmission efficiency in WiMedia protocol is studied. And an efficient transmission scheme to reduce the degradation of network performance by the loss of mini-frame is proposed in this paper. The proposed scheme can reduce total energy consumption and improve the transmission efficiency since it only retransmits mini-frame in which error is occurred. The simulation results show that proposed protocol can enhance the throughput performance and improve energy efficiency by minimizing the retransmission of mini-frame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.192-198
• /
• 2008

In this paper, we propose a scheme that improves the transmission performance of realtime multimedia data in wireless Local Area Network (LAN) environment, through the dynamical control of Transmission Opportunity (TXOP) period of the IEEE 802.11e HCCA Medium Access Control (MAC). The existing schedulers which determine the frame transmission time and its duration could not appropriately cope with the change of physical transmission rate, since the TXOP period has remained unchanged with the change of transmission rate of the wireless station. Our scheme is devised to keep the transmission performance of real-time multimedia data effectively unchanged by making TXOP period be extended when the transmission rate gets reduced. The proposed scheme is experimented along with IEEE 802.11e reference model using NCTUns simulator, which shows that the multimedia data is effectively delivered with the change of transmission rate as the distance between the wireless station and its access point increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.26-33
• /
• 2012

Please WBAN(Wireless Body Area Networks) is wireless communication of within 3 m radius from inside and outside of the body. WBAN is many uses IEEE 802.15.4 MAC protocol for WBAN MAC protocol requirements. IEEE 802.15.4 MAC protocol applies GTS(Guaranteed Time Slot) allocation scheme for guarantee packet delivery of application which requests QoS(Quality of Service). However, GTS allocation scheme of IEEE 802.15.4 MAC protocol uses FIFS(First In First Service) queueing. So it reduces data transmission reliability and has many problems. Therefore, IEEE 802.15.4 applies not WBAN MAC protocol for emergency data transmission. In this paper, we proposes a priority based MAC protocol for emergency data transmission in wireless body area networks. the proposal MAC protocol sets priority the data. So GTS reqeuest throughput of emergency data increasing and GTS allocation delay of emergency data decreasing.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.337-342
• /
• 2014

The reduction of drag torque is an important research issue in terms of improving transmission efficiency. Drag torque in a wet clutch occurs because of the viscous drag generated by the transmission fluid in a narrow gap (clearance) between the friction plate and a separate plate. The objective of this paper is to observe the effects of the friction plate area and the clearance on the drag torque using finite element simulation. The two-phase flow of air and oil fluid is considered and modeled for the simulation. The simulation analysis reveals that as the rotational speed increases, the drag torque generally increases to a critical point and then decreases sharply at a high speed regime. The clearance between the two plates plays an important role in controlling drag torque peak. An increase in the clearance causes a decrease in shear stress; thus, the drag torque also decreases according to Newton's law of viscosity. An observation of the effect of the area of contact between transmission fluid and friction plate shows that the drag torque increases with the contact area. The flow vectors inside the flow channel present clear evidence that the velocity of the fluid flows is faster with a larger friction plate, that is, in the case of a larger contact area. Therefore, the optimum size of the friction plate should be determined carefully, considering both the clutch performance and drag reduction. It is expected that the results from this study can be very useful as a database for clutch design and to predict the drag torque for the initial design with respect to various clutch parameters.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.340-341
• /
• 2011

본 논문은 수도권 전압안정도 향상을 위해 사용될 Synchro-Phasor에 대하여 그 최적 설치위치에 관하여 다루었다. 특히 WAMAC(Wide Area Monitoring And Control system)시스템 구축을 위해 국내 계통 전체 감시목적과 수도권 전압 안정도 향상이라는 두 가지 측면에서 최적 PMU 설치 위치에 대해 검토하고 그 안을 제시하였다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.129-133
• /
• 1999

In recent years, there is a growing needs for large capacity underground power transmission lines with the increasing demand of electric power in the urban area, where various environmental limitations are imposed on the overhead transmission lines. But it is difficult to get the space for the underground power transmission cables because of complicated distributions of underground public facilties such as subway, water pipes, gas etc. As the superconducting power cables have the large power transmission capacity, the high power transmission capacity, the high power transmission density, and low loss characteristics in comparison with a conventional cable, it would be a solution to meet the increased power demand. In this paper, the results of the conceptual design and analysis of power system of HTS power transmission cable is described.