• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.156-161
• /
• 2014

Anisotropy profile of a rubbed polyimide film is investigated using both a modified ultra high precision transmission ellipsometer and the analysis software previously developed to determine the optic axis distribution of discotic liquid crystals in the wide view film. The distorted sinusoidal variation of the ellipsometric constants obtained at an oblique angle of incidence indicates that the optic axis varies from $14.7^{\circ}$ to $40.6^{\circ}$ from the sample plane. The magnitude and distribution of anisotropy is expressed in terms of no, ne, and the cosine-shaped tilt angle distribution of the optic axis in a rubbed polyimide film.

• 한국통신학회논문지
• /
• 제21권10호
• /
• pp.2731-2737
• /
• 1996

The effect of the birefringence existing in the Faraday rotator on the isolation and transmission properties of the isolator was investigated. To maintain isolation of 50dB, both the deviation of the transmission angle between input and output polarizers and the deviation of the Faraday ratation angle are permitted to .+-.0.18.deg. for birefringenceless isolator and to .+-.0.09.deg. for birefringent isolator. This means that the isolator possessing linear birefringence of 0.5.deg. requires 505 more accurage adjustment than that of no birefringence. We also simulated the characteristics of wavelength dependence for both the virefringent isolator and the birefringencelless isolator. It is also found that formward transmission loss doesn't varing much with small birefringence.

• 센서학회지
• /
• 제19권1호
• /
• pp.62-66
• /
• 2010

We have proposed and demonstrated a rotation angle sensor based on the stress -optic effect of a fused fiber coupler whose transmission spectrum is altered by the torsional stress. The peak of transmission spectrum was shifted to longer wavelength region with rotation of the coupler. The rotation angle sensor revealed reproducibility and symmetric behavior with respect to the rotation direction. The sensitivity of the sensor was 0.367 [nm/degee].

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.180-185
• /
• 2004

Unlike industrial manipulators, the manipulators mounted on the service robots are interacting with humans in various aspects. Therefore, safety has been the important design issue. Many compliant robot arm designs have been introduced for safety. It is known that passive compliance method has faster response and higher reliability than active ones. In this paper, a new safe mechanism based on passive compliance has been proposed. Passive mechanical elements, specifically transmission angle of the 4-bar linkage, springs and shock absorbing modules are incorporated into this safe mechanism. This mechanism works only when the robot arm exerts contact force much more than the human pain tolerance. Validity of the safe mechanism is verified by simulations and experiments. In this research, it is shown that the manipulator using this mechanism provides higher performance and safety than those using other passive compliance mechanisms.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.47-50
• /
• 2001

In order for effective operation of existing power systems, introduction of the so-called FACTS(Flexible AC Transmission System) such as SVC and UPFC etc, is unavoidable. The UPFC(Unified Power Flow Controller) is composed of STATCOM(Static Compensator) and SSSC(Static Synchronous Series Compensator), and is used to control the magnitude and phase angle of injected sources which are connected bothin series and in parallel with the transmission line to control the power flow and bus voltages. This paper presents a UPFC simulation on RTDS. The voltage and phase angle of a system have been analyzed by regulating the firing angle inside the UPFC.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.133-137
• /
• 2016

The surface treatment of cover glass for conversion efficiency of photovoltaic cell is important to reduce reflectivity and to increase the incident light. In this work, random textured anti glare (RTAG) glass was prepared by wet surface coating method. Optical properties due to the changes of surface morphology of RTAG glass were compared and conversion efficiency of photovoltaic cell was researched. Grain size and changes of surface morphologies formed with surface etching time greatly affected optical transmittance and transmission haze. Current density (Jsc) were high at the condition when surface morphologies reflection haze were low and transmission haze were high. Jsc was $40.0mA/cm^2$ at glancing angle of $90^{\circ}$. Incidence light source was strongly influenced by surface treatment of cover glass at high incidence angle but was hardly affected light source at the low angle of incidence.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.95-101
• /
• 2022

This paper proposes a method to process the shape of an optical transmission road and attempts to determine the most suitable single processing method for an acrylic plate optical transmission road. In addition, by manufacturing an automatic pattern processing device to generate certain shapes on the acrylic plate at regular intervals, and measuring the illuminance of the patterned acrylic plate optical transmission road, the measured illuminance was confirmed to fall under the KS illuminance values presented in Table 1. In conclusion, when an incident light of approximately 20,000 lx is applied, the transmission illumination is approximately 200 lx, which represents a transmission rate of approximately 1% for incident light and corresponds to the KS illumination criterion F. Additionally, the right-angle triangular pyramid base size (A) processed at a temperature of 350 ℃ for one second was 2 mm, exhibiting the largest transmission illumination of 280 lx. When the transparent acrylic plate was set to a constant size of 1.6 mm at the bottom of the right-angle triangular pyramid, the fastest response occurred at a processing tip temperature of 350 ℃ (0.04 s). On the other hand, it took 10 s to process the size of the bottom of the right-angled triangular pyramid at a temperature of 200 ℃ to 1.6 mm, and it was confirmed that the optical transmission efficiency was significantly reduced because of the burr that occurred at this time.

• 한국안광학회지
• /
• 제9권1호
• /
• pp.53-68
• /
• 2004

소프트콘택트렌즈의 단백질 부착은 미생물에 의한 감염을 증가시킬 뿐만 아니라 이물감이나 흐릿한 시야를 비롯한 착용감의 저하 등과 같은 많은 부작용을 유발할 수 있다. 본 연구에서는 20대 20명(40안)이 착용한 소프트콘택트렌즈에의 단백질 부착 양상을 착용시간별로 조사하고, 렌즈의 접촉각과 총 가시광선 투과도에 미치는 영향을 알아보았다. 또한 각막의 용도 및 pH 변화가 단백질의 부착에 미치는 영향에 대하여서도 연구하였다. Etafilcon A 재질의 2주착용 소프트콘택트렌즈는 다목적용액으로 매일 관리를 하였음에도 불구하고 렌즈에 단백질이 남아있었으며 착용이 계속됨에 따라 정점 부착되는 단백질의 양도 증가하여 착용 후 14일이 지난 렌즈의 경우는 이미 렌즈의 접촉각이 통계적으로 유의성있게 크게 증가하여 렌즈 표면의 습윤성에 영향을 미칠 수 있음을 알 수 있었으며, 총 가시광선 투과량도 7% 정도 감소하였음을 확인하였다. 또한 소프트콘택트렌즈에서 단백질의 부착은 누액의 온도가 증가할수록 많아졌으며 누액의 pH가 중성인 경우 단백질의 부착양이 가장 적었으며 산성이나 알칼리성으로 갈수록 부착되는 단백질의 양이 증가하였다. 연속착용렌즈 착용시에는 눈을 뜨고 있는 활동시간보다 눈을 감고 있는 수면 중에 렌즈에 부착되는 단백질의 양이 크게 증가하였으며 이러한 결과는 성별과 관계없이 동일하였다. 연속착용렌즈를 8시간동안 착용하였을 때 렌즈에 부착된 단백질의 양은 렌즈 표면의 접촉각과 총 가시광선 투과도에 큰 변화를 주지는 않았다.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.134-145
• /
• 1996

Since the skid-steer loader is able to work for excavating, lifting and transporting load even at the narrow space, they are widely used in the regular farm and the livestock farm. The skid-steer loader normally adopts the hydrostatic transmission because the power to move the machine backward and forward should be delivered independently on both sides of wheels. Contrast to the mechanical system such as chain and belt transmissions, however, the hydrostatic transmission is less efficient in the use of energy and more difficult in the maintenance. This study was intended to investigate the feasibility of using triangular-type belt clutch and V-belt transmission for the newly developed skid-steer loader in order to overcome the problems stated in the hydrostatic transmission. In the developed triangular-type belt clutch, the centers of driving, driven and idler sheaves are arranged in the triangular shape in a plane, and V-belts were loaded loosely on three sheaves. The power is transmitted by pressing the idler connected to a lever on the loosened V-belt. Contrast to the normal belt clutch using two sheaves, the newly developed belt clutch has the characteristics of small contact-angle of the driving sheave at no bucket load and increasing contact-angle at the time of power transmission. The results of research can be summarized as follows: 1) The developed triangular-type belt clutch adopted a spring-loaded slackside idler which could transmit more power than a fixed idler could by sacrificing the belt life. The life of V-belt used in the power transmission reached at 500 hours(6 months) when the engine power of 11.8 ㎾ was transmitted. Also, it was feasible to develop the large industrial skid-loader with the V-belt transmission by using the proper set of sheaves. 2) The developed skid-steer loader changed the rotating radius and speed with bucket loads as the conventional skid steer loader did. The rotating speed was 47 deg/s at the maximum bucket load of 2.74 kN when the minimum rotating radius was 1.5m. 3) The power required in turning at the bucket load of 2.74 kN was 4 ㎾ and the slippage of V-belt was less than 1%.

• Journal of Radiation Protection and Research
• /
• 제41권3호
• /
• pp.282-285
• /
• 2016

Background: To optimize the photon transmission efficiency of light guides used in scintillation detectors, LightTools code, which can construct and track light, was used to analyze photon transmission effectiveness with respect to light guides thickness. Materials and Methods: This analysis was carried out using the commercial light guide, N-BK 7 Optical Glass by SCHOTT, as a model for this study. The luminous exitance characteristic of the LYSO scintillator was used to analyze the photon transmission effectiveness according to the thickness of the light guide. Results and Discussion: The results of the simulations showed the effectiveness of the photon transmission according to the thickness of the light guide, which was found to be distributed from 13.38% to 33.57%. In addition, the photon transmission efficiency was found to be the highest for light guides of 4 mm of thickness and a receiving angle of $49^{\circ}$. Conclusion: Through such simulations, it is confirmed that photon transmission efficiency depends on light guide thickness and subsequent changes in the internal angle of reflection. The aim is to produce an actual light guide based on these results and to evaluate its performance.