• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.903-906
• /
• 2004

A ${\pi}$ cell is initially in splay state. Before driving a ${\pi}$ cell, transition from splay to bend state is always necessary which originates from nucleation. We propose a novel technique to make bend transition fast and effectively by forming transition cores around the pixels with the technique of multi-domain alignment, where domain boundaries play a crucial role in splay to bend transition. This noble technique enables the splay to bend transition to occur within less than 2 seconds with a low applied voltage.

• Journal of Information Display
• /
• v.5 no.2
• /
• pp.19-22
• /
• 2004

A ${\pi}$ cell is initially in splay state. Before driving a ${\pi}$ cell, transition from splay to bend state is always necessary which originates from nucleation. We propose a novel technique to make bend transition fast and effectively by forming transition cores around the pixels with the technique of multi-domain alignment, where domain boundaries play a crucial role in splay to bend transition. This noble technique enables the splay to bend transition to occur within less than 2 seconds with a low applied voltage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2006-2009
• /
• 2005

This paper presents a method for registering images using phase correlation technique in fourier domain, hough transform and multi-resolution wavelet. To register images, source and input images are transformed to wavelet domain. An angular transition can be obtained by applying hough transform technique followed by phase correlation. Then we apply phase correlation technique to find x-axis and y-axis transition. We apply wavelet transform to reduce processing time and also use its coefficients as edge information instead of canny detector. With multi-resolution property of wavelet transform, registration time can be greatly reduced. After we get all transition parameters, we transform the input images according to these parameters. Then, we compose and blend all images into a new large image with details of all source images. From our experiment, we can find the accurate transition both x-y translation and angular transition with less error.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.32-35
• /
• 1996

In this paper, it is shown that the dominant errors of baro-altimeters can be characterized by bias and scale factor errors. Also an optimal filter for estimating both bias and scale factor is derived based on the concept of model transition. The optimal filter is, however, not realizable because the model transition hypotheses increase exponentially. Therefore a realizable suboptimal filter using the interacting multiple model(IMM) technique is proposed. Computer simulation results show that the estimation errors of the proposed filter are smaller than those of the conventional least squares algorithm with a forgetting factor when both the bias and the scale factor are varying.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1597-1604
• /
• 2005

Recursive Patching is an efficient multicast technique for large-scale video on demand systems and recursively shares existing video streams with asynchronous clients. When Recursive Patching initiates a transition stream, it always makes a transition stream have additional data for the worst future request. In order to share a VOD server's limited network bandwidth efficiently, this paper proposes Practical Patching that removes the unnecessary data included in the transition stream. The proposed Practical Patching dynamically expands ongoing transition streams when a new request actually arrives at the server. As a result, the transition streams never have unnecessary data. Simulation result confirmed that the proposed technique is better than Recursive Patching in terms of service latency and defection rate.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.4
• /
• pp.356-366
• /
• 2022

This paper presents a mode transition method that applies frequency compensation technique of an LLC resonant converter for stable mode transition. LLC resonant converters used in various applications require high efficiency and high power density. However, because of circuit property, a wider voltage gain range equates to a greater circuit loss, so maintaining high efficiency at all voltage gain ranges is difficult. In this case, full bridge-half bridge mode transition method can be used, which maintains high efficiency even in a wide voltage gain range. However, this method causes damage to the circuit through overcurrent by the mode transition. This study analyzes the cause of the problem and proposes a mode transition method that applies frequency compensation technique to solve the problem. The proposed method verifies the stable transition through simulation analysis and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.140-147
• /
• 2003

As the huge energy transfer systems like as nuclear power plant and steam power plant are operated for a long time at a high temperature, mechanical properties are changed and ductile-brittle transition temperature is raised by degradation. So it is required to estimate degradation in order to assess the safety, remaining life and further operation parameters. The sub-sized specimen test method using surveillance specimen was developed for evaluating the integrity of metallic components. In this study, we would like to present the evaluation technique of the ductile-brittle transition temperature by the sub-sized specimen test. The four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method. The tensile test and fracture toughness test were performed. The results of the fracture toughness tests using the sub-sized specimens were compared with the evaluation technique of the ductile-brittle transition temperature.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.579-584
• /
• 2001

As the huge energy transfer systems like as nuclear power plant and steam power plant are operated for a long time, mechanical properties are changed and ductile-brittle transition temperature is raised by degradation. So it is required to estimate degradation in order to assess the safety, remaining life, and further operation parameters. The sub-sized specimen test method using surveillance specimen was developed for evaluating the integrity of metallic components. In this study, we would like to present the evaluation technique of the ductile-brittle transition temperature by the sub-sired specimen test. The four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method. The tensile test and fracture toughness test were performed. The results of the fracture toughness tests using the sub-sized specimens were compared with the evaluation technique of the ductile-brittle transition temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.629-633
• /
• 2001

Electrical properties of the $\alpha$-In$_2$Se$_3$ single crystals grown by use of the Bridgman technique were examined in the transition temperature range between $\alpha$-phase and $\beta$-phase. $\alpha$-In$_2$Se$_3$ single crystal has ' the rhombohedral structure and lattice constants are a=4.025 $\AA$, c=28.771 $\AA$ in c-axis. The transition temperatures of the stoichiometric $\alpha$-In$_2$Se$_3$ single crystal is 198.8$^{\circ}C$ according to the specimens. The temperature of $\alpha$longrightarrow$\beta$ phase transition decreased but the temperature of $\beta$longrightarrow$\alpha$ phase transition increased as the number of heating-cooling cycle increased.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.6-9
• /
• 2015

A new cross disciplinary conception of transitional aero-optics is built up during analyzing and measuring the linkage between the hypersonic boundary layer transition on a flat plate and the jittering characteristics of the small-aperture beam through that boundary layer. Based on that conception, the Small-Aperture Beam Technique (SABT) and high-speed Imaging Camera System (ICS) used in aero-optical studies are considered as new techniques for the assessment of the hypersonic transition in the boundary layer on a flat plate. In the FD-20 gun tunnel, for the free stream parameters with Mach number of 8 and unit Reynolds number of $1{\times}10^7$ (1/m), those two optical techniques are used to measure the jitter of the small-aperture beam. At the same free stream parameters, the distribution of the heat transfer along the centerline of the flat plate is also measured by the thin film resistance gauge technique. The results show the similarity of the increase trend between the heat transfer and the jitter of the small-aperture beam in the transitional region. It helps us to surmise that it may be feasible to diagnose the transition in a hypersonic boundary layer on a flat plate by means of those above optical techniques.