• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.3
• /
• pp.224-230
• /
• 2002

In this paper, a counting algorithm hybridized with an adaptive automatic thresholding method based on Otsu's method and the algorithm that elongates markers obtained by the well-known watershed algorithm is proposed to enhance the exactness of the microcell counting in microscopic images. The proposed counting algorithm can be stated as follows. The transformed full image captured by CCD camera set up at microscope is divided into cropped images of m$\times$n blocks with an appropriate size. The thresholding value of the cropped image is obtained by Otsu's method and the image is transformed into binary image. The microbial cell images below prespecified pixels are regarded as noise and are removed in tile binary image. The smoothing procedure is done by the area opening and the morphological filter. Watershed algorithm and the elongating marker algorithm are applied. By repeating the above stated procedure for m$\times$n blocks, the m$\times$n segmented images are obtained. A superposed image with the size of 640$\times$480 pixels as same as original image is obtained from the m$\times$n segmented block images. By labeling the superposed image, the counting result on the image of microbial cells is achieved. To prove the effectiveness of the proposed mettled in counting the microbial cell on the image, we used Acinetobacter sp., a kind of ammonia-oxidizing bacteria, and compared the proposed method with the global Otsu's method the traditional watershed algorithm based on global thresholding value and human visual method. The result counted by the proposed method shows more approximated result to the human visual counting method than the result counted by any other method.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.675-678
• /
• 2000

This paper presents a parametric line equation on the log-polar mapped plane to detect the straight lines in an original image. The log-polar edge image used in Hough transform is constructed by combining the edge images of both fovea and periphery. The foveal edge image detected by a Sobel mask on the Cartesian plane is transformed to the log-polar plane by forward mapping but the edge detection of the peripheral region is obtained by directly applying the newly developed mask to the log-polar plane. This paper also proposes a analytic method then determining a border between the fovea and the periphery regions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2074-2084
• /
• 2001

la this paper, a new digital watermarking algorithm using wavelet transform in frequency domain is suggested. The wavelet coefficients of low frequency subband are utilized to embed the watermark, After the original image is transformed using discrete wavelet transform, their coefficients are transformed into efficient1y in Sequency domain. DCT and FFT transforms are utilized in this processing. Watermark image of general image format is transformed using DCT and the hiding watermark into wavelet coefficients is equally distributed in frequency domain. Next, these wavelet coefficients are performed with inverse transform. The detection process of watermark is performed with reverse direction to insertion process. In this paper, we developed core watermark technologies which are a data hiding technology to hide unique logo mark which symbolizes the copyright and a robust protection technology to protect logo data from external attack like as compression, filtering, resampling, cropping. The experimental results show that two suggested watermarking technologies are invisible and robust.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1046-1057
• /
• 2004

An image enhancement method using both homomorphic transformation and multiscale decomposition is proposed. The original image is first transformed to homomorphic domain by taking the logarithm, is then separated to multiscales. These multiscales are combined with weighting. The combined signal is exponentially transformed back into intensity domain. In homomorphic domain, the magnitude control of low frequency component make change the dynamic range, and the magnitude control of the other frequency components contribute to enhancement of the contrast. The "${\AA}$ trous" algorithm, which has a simple and efficient scheme, is used for multiscale decomposition. The performance of proposed method is verified by simulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.159-166
• /
• 1992

Landsat data are valuable in itself, and if they are classified in quantitative information and transformed to practical users, they will be more useful. In this view, it is very important to extract hydrologic parameter from Landsat data and to develope the hydrologic model that can be transformed to hydrologist to use it. This study is primary step for accomplishment of such purpose. This paper include output of hydrologic model which define the relation between soil condition and discharge and process of analysis of optical image or digital image that is adapted for hydrologic model. Finally, this paper present that Landsat image is very useful, economic and produce sufficiently accurate information for hydrologic model in large area watershed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2789-2800
• /
• 1996

Real time fractal coding for successive QCIF 144*176 luminance images has been implemented on a 50MHz IBM 486 personal computer. To satisfy the frame encoding speed and data compression ratio, following algorithms are adopted. In order to minimize encoding time, extension SAS being not searching of domain blocks is used. for reducing the bits per pixel, conventioal 4*4 range block is extended to 8*8 range block. and range block extension decrease quality of decoded image. For improvement quality of decoded image, the paper apply quad-tree partition mothod. In order to divide **8 range block, self-simiarity is compared 8*8 range block with spatial contractive transformed 8*8 domain block. According to self-simiarity, the block is partitioned and owing to block partition, increased encoding time is minimized. According to self-simiarity of 8*8 range block and spatial contractive transformed 8*8 domain block, number of fractal factor is varied. Simultaneously with minimizing the decrement of decoded image's quality, transmittion rate and encoding time is shorted. The results enable us to process the real-time fractal coding. For the claire test image, the average PSNR was 32.4dB, 0.12 bit rates and 33ms coding time per frame.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.385-392
• /
• 2010

A LiDAR technique has the merits that survey engineers can get a large number of measurements with high precision quickly. Aerial photos and satellite sensor images are used for generating 3D spatial images which are matched with the map coordinates and elevation data from digital topographic files. Also, those images are used for matching with 3D spatial image contents through perspective view condition composed along to the designated roads until arrival the corresponding location. Recently, 3D aviation image could be generated by various digital data. The advanced geographical methods for guidance of the destination road are experimented under the GIS environments. More information and access designated are guided by the multimedia contents on internet or from the public tour information desk using the simulation images. The height data based on LiDAR is transformed into DEM, and the real time unification of the vector via digital image mapping and raster via extract evaluation are transformed to trace the generated model of 3-dimensional downtown building along to the long distance for 3D tract model generation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.442-449
• /
• 2002

EZW (Embedded Zerotree Wavelet) is an efficient algorithm to encode wavelet-transformed image. In this algorithm, each coefficient of wavelet transformed image is given one of the specific symbols and encoded according to its significant priority. In this paper, we analysis the occurrence conditions of symbols in EZW and propose a modified EZW algorithm. In the proposed algorithm, the significance of an IZ (Isolated Zero) symbol is determined by the additional conditions as well as its absolute value. The occurrence of IZ symbols is decreased and the required bits for insignificant IZ symbols is saved, so we obtained good quality of the reconstructed image.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.457-469
• /
• 2003

In this paper, we have proposed the efficient algorithm that can segment the video scene change using a various statistical characteristics obtained from by applying the wavelet transformation for each frames. Our method firstly extracts the histogram features from low frequency subband of wavelet-transformed image and then uses these features to detect the abrupt scene change. Second, it extracts the edge information from applying the mesh method to the high frequency subband of transformed image. We quantify the extracted edge information as the values of variance characteristic of each pixel and use these values to detect the gradual scene change. And we have also proposed an algorithm how extract the proper key frame from segmented video scene. Experiment results show that the proposed method is both very efficient algorithm in segmenting video frames and also is to become the appropriate key frame extraction method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.119-128
• /
• 1994

In this paper we propose a new method for the recognition of 2-D partially occluded objects. The border of the object is transformed to a curve in arc length-accumulated interior angle plane. The transformed curve of an image is partitioned so that each segment is bounded by the concave interior angles. In order to tolerate shape distortion due to the polygonal approximation of the boundary of the object a group of feature points of the input image are matched with those of model views. The estimation method for positions and orientations of the identified objects objects is presented.