• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.324-330
• /
• 1990

In this study, in order to perform dynamic design of machine tools reasonably and effectively, a method was formulated to be applicable to the damped structures connected by joints having elasticity and damping by using substructure synthesis method. And a nonlinear solution method was proposed and it formulates the nonlinear parts by describing functions and uses the reducing transformation matrix by the substructure synthesis method. The results of frequency response analysis of a machine tool, where an NC lathe was partitioned by three parts of spindle, housing and bed-base part and the nonlinearity of bearing parts between spindle and housing was modelled, showed force dependency of the response.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.195-204
• /
• 1996

We suggest a transform method form asynchronous finite state machines (AFSMs) into signal transition graphs (STGs) for speed-independent circuit synthesis. Existing works synthesize nodes in the state graph increases exponentially as the number of input and output signals increases. To overcome the problem of the exponential data complexity, we transform AFSMs into STGs so that the previous synthesis algorihtm form STGs can be applied.Accoridng to the experimental results, it turns out that our synthesis method produces more efficient circuit than the previous synthesis methods.

• Journal for History of Mathematics
• /
• v.29 no.4
• /
• pp.243-254
• /
• 2016

This research identifies the elements of the methodologies of Newton's discovery of his dynamics. These methodologies involve the transformation of preceding theoretical concepts and the discovery of common cause. This essay consists of two parts within historical case studies of Newton's works. The elements of the method of discovery consists of the transformation of preceding concepts and the identification of common cause in the formation of the research program's hard cores and protective belts. Newton transformed their predecessors' concepts to find out appropriate common causes in his dynamical theory. The transformed theoretical concepts are synthesized to be constructed as the elements of common cause which provide the foundations of Newtonian research programs.

• The Korean Journal of Ceramics
• /
• v.3 no.3
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.

• Journal of Powder Materials
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2003

Porous TiNi bodies were produced by Self-propagating High-temperature Synthesis (SHS) method from a powder mixture of Ti and Ni. Porosity, pore size and structure, mechanical property, and transformation temperature of TiNi product were investigated. The average porosity and pore size of produced porous TiNi body are 63% and $216\mutextrm{m}$, respectively. XRD analysis showed that the major phase of produced TiNi body is B2 phase. Its average fracture strength and elastic modulus measured under dry condition were $22\pm2$ MPa and $0.18\pm0.01$GPa, respectively. It could be strained up to 7.3 %. The transformation temperatures determined by DSC showed the $M_s$ temperature of $67^{\circ}C$ and $A_f$ temperature of $99^{\circ}C$.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.67-75
• /
• 1998

Geometric and thermal errors are key contributors to the errors of a computer numerically controlled turning center. A planar error synthesis model is obtained by synthesizing 11 geometric and thermal error components of a turning center with homogeneous coordinate transformation method. This paper shows the sensitivity analysis on the temperature change, the confidence evaluation on the uncertainty Of measurement systems, and the error contribution analysis from the planar error synthesis model. Planar error in the z direction was very sensitive to the temperature change. and planar errors in the x and z directions were not affected by the uncertainty of measurement systems. The error contribution analysis ,which is applicable to designing a new turning center, was helpful to find the large error components which affect planar errors of the turning center.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.511-514
• /
• 2002

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.46-51
• /
• 2011

Real-time formation of $L1_0$ phase of FePt nanoparticles in the gas phase during ultrasonic-spray pyrolysis is first discussed in the present study. Without any post heat treatment, $L1_0$ phase of FePt nanoparticles appeared at the temperature above $900^{\circ}C$ in the gas phase synthesis. X-ray diffractometry (XRD) and transmission electron microscopy (TEM) studies revealed that FePt nanoparticles less than 10 nm in size contained small volume of $L1_0$ fct phase. However, in other samples obtained at the temperature below $900^{\circ}C$, iron oxide phase co-existed and no evidence of phase transformation was found. Thus, it is anticipated that the time of flight of particles required for crystallization and phase transformation was extended according to the increase of the collision rate. Finally, magnetic properties represented by coercivity and saturation magnetization and functional groups on the particle surface were discussed based on VSM and FT-IR results.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.843-844
• /
• 2000

• Journal of Korean Philosophical Society
• /
• v.148
• /
• pp.157-181
• /
• 2018

The aim of this essay is to identify elements of methodologies to investigate the development of Newtonian dynamics. This methodology involves the transformation and synthesis of preceding theories. My essay attempts to confirm my assertion by analyzing historical case of Newton's discovery of his dynamics. While discovering his mechanistic theory, Newton reconstructed theoretical concepts and structures of intellectual predecessors, such as Aristotle, Descartes, Galileo, and Kepler. Newton's synthesis was possible only after carefully reconstructing the appropriate and useful ideas of previous natural philosophers' ideas. As a result, Newtonian dynamics are completed with these modified and integrated concepts incorporated into Newton's law of motion and space-time concepts. This study consists of two parts. First, Lakatos' research program has been applied in order to analyze the structure of Newtonian dynamics. Second, the aforementioned methodologies of discovery are distilled from the case study.