• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.245-252
• /
• 2006

This paper presents a method based on neural networks to detect the broken rotor bars and end rings of squirrel cage induction motors. At first, detection methods are studied, and then traditional methods of fault detection and dynamic models of induction motors by using winding function model are introduced. In this method, all of the stator slots and rotor bars are considered, thus the performance of the motor in healthy situations or breakage in each part can be checked. The frequency spectrum of current signals is derived by using Fourier transformation and is analyzed in different conditions. In continuation, an analytical discussion and a simple algorithm are presented to detect the fault. This algorithm is based on neural networks. The neural network has been trained by using information of a 1.1 KW induction motor. This system has been tested with a different amount of load torque, and it is capable of working on-line and of recognizing all normal and ill conditions.

• Communications for Statistical Applications and Methods
• /
• v.22 no.4
• /
• pp.361-375
• /
• 2015

A measure of skewness and kurtosis is proposed to test multivariate normality. It is based on an empirical standardization using the scaled residuals of the observations. First, we consider the statistics that take the skewness or the kurtosis for each coordinate of the scaled residuals. The null distributions of the statistics converge very slowly to the asymptotic distributions; therefore, we apply a transformation of the skewness or the kurtosis to univariate normality for each coordinate. Size and power are investigated through simulation; consequently, the null distributions of the statistics from the transformed ones are quite well approximated to asymptotic distributions. A simulation study also shows that the combined statistics of skewness and kurtosis have moderate sensitivity of all alternatives under study, and they might be candidates for an omnibus test.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1760-1770
• /
• 2018

This paper presents a control bandwidth extension method for inverters with a low carrier ratio. The bandwidth is extended at the price of decreasing the phase margin. Then the phase margin is compensated by introducing an extra leading angle into an inverse Park transformation. The model of the controller with the proposed method is established. The magnitude and phase characteristics are also analyzed. Then the influence on system stability when the leading angle is introduced is analyzed. The proposed method is applied to design an inverter controller with both a large bandwidth and a desired phase margin, and the experimental results verify that the controller performs well in the steady-state and in terms of transient response.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1267-1276
• /
• 2024

The emerging technologies at the industrial level have deployed rapidly within the energy transition process innovations. The nuclear industry incorporates several technologies like Artificial Intelligence (AI), Machine Learning (ML), Digital Twins, High-Performance-Computing (HPC) and Quantum Computing (QC), among others. Factors identifications are explained to set up a regulatory framework in the digitalization era, providing new capabilities paths for nuclear technologies in the forthcoming years. The Analytical Network Process (ANP) integrates the quantitative-qualitative decision-making analysis to assess the implementation of different aspects in the digital transformation for the New-Energy Transition Era (NETE) with a Nuclear Power Infrastructure Development (NPID).

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1145-1155
• /
• 2000

The purpose of this study is to explore the concept spirituality and to gain understanding of nursing intervention that may improve spiritual well-being. The concept analysis framework developed by Walker and Avant (1995) was used to clarify the concept. In the study, 'Harmonious interconnectedness', 'Transcendence', 'Integrative Energy' and 'Purpose and Meaning in Life' emerged as the critical attributes of spirituality. The first attribute, 'harmonious Inter- connectedness', has three categories including intrapersonal, (self), interpersonal (others/ nature) and transpersonal (the Supreme Being). The second attribute, 'Transcendence', is defined as the ability to extend one's own self beyond the limits of usual experiences and to achieve new perspectives. This attribute is demonstrated by 'coping with situations', to 'self-healing', and 'transformation'. The third attribute of spirituality is 'Integrative Energy', which integrates all dimensions and acts as a creative and dynamic force that keeps a person growing and changing. 'Integrative Energy is also defined as an inner resource that gives a sense of empowerment. Therefore the highly spiritual person demonstrate 'inner peace', 'growing', 'inner strength,' and 'well-being'. The fourth attribute 'Purpose and Meaning in Life' represents a sense of connectedness with one's inner values and with a greater purpose in life. It is demonstrated by 'hope' and 'a powerful life'. In this study, the antecedents of the spirituality represented as 'spirit' and its potential enablers were 'Introspection/reflection', 'Interconnectedness with all living things', and an 'Awareness of a Higher-Power'. The consequences of this concept may be described as 'physical, psychosocial, and spiritual well-being'. Empirical referents of this are 'purposeful life' 'self-worth' 'hope' 'love' 'service' 'forgiveness' 'trust/belief' 'inner peace' 'self-actualization' 'religious practices' 'transformation' 'inner strength' and 'coping'. In conclusion, spirituality can be defined based on these critical attributes. Spirituality is a dynamic, integrative energy based on a feeling of harmonious interconnection with self, others and a higher power. Through it, one is enabled to transcend and to live with meaning and purpose in life.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.533-541
• /
• 2017

This paper presents a novel Parameter-Independent Fictive-Axis (PIFA) approach for the Voltage-Oriented Control (VOC) algorithm used in grid-tied single-phase inverters. VOC is based on the transformation of the single-phase grid current into the synchronous reference frame. As a result, an orthogonal current signal is needed. Traditionally, this signal has been obtained from fixed time delays, digital filters or a Hilbert transformation. Nevertheless, these solutions present stability and transient drawbacks. Recently, the Fictive Axis Emulation (FAE) VOC has emerged as an alternative for the generation of the quadrature current signal. FAE requires detailed information of the grid current filter along with its transfer function for signal creation. When the transfer function is not accurate, the direct and quadrature current components present steady-state oscillations as the fictive two-phase system becomes unbalanced. Moreover, the digital implementation of the transfer function imposes an additional computing burden on the VOC. The PIFA VOC presented in this paper, takes advantage of the reference current to create the required orthogonal current, which effectively eliminates the need for the filter transfer function. Moreover, the fictive signal amplitude and phase do not change with a frequency drift, which results in an increased reliability. This yields a fast, linear and stable system that can be installed without fine tuning. To demonstrate the good performance of the PIFA VOC, simulation and experimental results are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.166-170
• /
• 2005

This paper describes the experimental study for the position estimation method of underwater sound source using the Nearfield Acoustic Holography. The result confirms that it can be used in the identification of underwater noise sources. The sound sources in the experimental work consists of 2 spherical projectors and the near-Held sound pressure is measured in the hologram plane. From the cross-power spectra of the measured data, the complex sound pressures on the hologram plane is derived and its spatial transformation gives sound fields in a source region. The obtained sound fields in a source region showed that the position of each sound source and their relative source strength are exactly estimated. In conclusion, this technique can be applied for estimation of each source position and its relative strength contribution for the underwater multiple sound sources.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.117-129
• /
• 2005

The purpose of this study was to characterize the impact shock wave and its attenuation, and the kinematic response of the lower extremity's joints to the impact shock during downhill running in which the lower extremity's extensor acts dominantly. For this study, fifteen subjects(mean age:$27.08{\pm}4.39$; mass:$76.30{\pm}6.60$; height:$177.25{\pm}4.11$) were required to run on the 0% grade treadmill and downhill grades of 7%, and 15% in random at speed of their preference. When the participant run, acceleration at the tibia and the sacrum and kinematic data of the lower extremity were collected for 20s so as to provide at least 5 strides for analysis at each grade. Peak impact accelerations were used to calculate shock attenuation between the tibia and sacrum in time domain at each grade. Fast Fourier transformation(FFT) and power spectral density(PSD) techniques were used to analyze impact shock factors and its attenuation in the frequency domain. Joint coordinate system technique was used to compute angular displacement of the ankle and knee joint in three dimension. The conclusions were drawn as fellows: 1. Peak impact accelerations of the tibia and sacrum in downhill run were greater than that of 0% grade run, but no significant between conditions. Peak shock of PSD resembled also in pattern of peak impact acceleration. The wave of impact shock attenuation between the tibia and sacrum decreased with increasing grade, but didn't find a significant difference between grade conditions. 2. Adduction/abduction, flexion/extention, and internal/external rotation of the ankle and knee joints at support phase between grade conditions didn't make much difference. 3. At grade of 7% and 15%, there were relationship between the knee of the flexion/extension movement and peak impact acceleration during heel strike and found also it in the ankle of plantar/dorsiflexion at grade of 15%.

• The Southeast Asian review
• /
• v.19 no.2
• /
• pp.173-218
• /
• 2009

Bring this analysis down to people-centered development perspective and looking through democratization in the Philippines, Thailand and Indonesia, we find similarities and differences among them related with the intensity of conflicts between development and human rights in the process of democratization in line with global transformation. Civil society in the Philippines criticized the developmental path in the Philippines which failed to implement land reform and eradication of poverty under the transition from 'patrimonial oligarchy' to democracy. In Thailand the coalition of military and the royalists had consolidated its power since Sarit military regime, which later paved the way 'hybrid oligarchy' era. Most Thai civil society organizations has regarded their developmental experience rather as 'maldevelopment' which disregarded economic and social rights. It has been especially believed by Thai localists that the stimulation of local markets and the building of autonomic community society will form the alternative economy without going against the conservative banner of nation, religion and king. Thaksin as a populist successfully took advantage of Thai localist ethos in favour of taking the seat of power. He projected himself as a modernizer focused on economic growth and cleaner politics. However Thaksin's procedural legitimacy was overthrown by counterattacking from military-royalist alliance, pretexting that Thaksin caused internal conflicts and lacked morality. Soeharto's New Order regime which can be called 'administrative oligarchy' had an antipathy towards notions of economic and social rights as well as civil and political rights. In spite of the fact that the fall of Soeharto opened the political space for democratic civil society organizations which had long struggled with development aggression and human rights abuses, there have been continuously a strong political and military reaction against human rights activists, NGOs and ethnic minorities such as Aceh and Papua. Nevertheless, Indonesian democracy is more promising than Philippine's and Thai democracy in terms of comparatively less pre-modern legacies.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.435-446
• /
• 2023

Corrosion behaviors of laser-welded super duplex stainless steel (SDSS) tubes after exposure to an actual power plant environment for one year and those of fin-tube welded SDSS were evaluated. Results showed that corrosion damage on the back side of the SDSS tube in the direction of hot air was higher than that on the front side regardless of weldment location. However, corrosion damage showed no difference between weldment and base metal due to recovery of phase fraction in the weldment through post weld heat treatment (PWHT). Nevertheless, the SDSS tube showed severe corrosion damage along grain boundary due to surface phase transformation (δ → γ) and Cr₂N precipitation caused by PWHT with a high N₂ atmosphere. Corrosion resistance of the SDSS tube was recovered when degraded surface was removed. Corrosion sensitivity of a fin-tube increased significantly due to pre-existing crevice, unbalanced phase fraction, and σ phase precipitation adjacent to the fusion line. Although corrosion resistance was improved by recovered phase fraction and sufficient dissolution of σ phase during PWHT, corrosion reaction was concentrated at the pre-existing crevice. These results suggest that welding conditions for fin-tube steel should be optimized to improve corrosion resistance by removing pre-existing crevice in the weldment.