• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1561-1570
• /
• 1997

This study explores the treatment of the max-value cost function over a parameter interval in parametric optimization. To avoid the computational burden of the transformation treatment using an artificial variable, a direct treatment of the original max-value cost function is proposed. It is theoretically shown that the transformation treatment results in demanding an additional equality constraint of dual variables as a part of the Kuhn-Tucker necessary conditions. Also, it is demonstrated that the usability and feasibility conditions on the search direction of the transformation treatment retard convergence rate. To investigate numerical performances of both treatments, typical optimization algorithms in ADS are employed to solve a min-max steady-state response optimization. All the algorithm tested reveal that the suggested direct treatment is more efficient and stable than the transformation treatment. Also, the better performing of the direct treatment over the transformation treatment is clearly shown by constrasting the convergence paths in the design space of the sample problem. Six min-max transient response optimization problems are also solved by using both treatments, and the comparisons of the results confirm that the performances of the direct treatment is better than those of the tranformation treatment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.117-124
• /
• 1995

The main purpose of the present study was to investigate coordinate transformation based on two different systems: one was the World Geodetic System 1984(WGS84) adopted as a reference system for GPS satellite surveying;and another was the current Korean geodetic system based on Bessel ellipsoid. For this purpose, three methods were used to determine 7 parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. The coordinate transformation was carried out using simillity transformation applied the obtained 7 parameters and the precision of transformed coordinate was evaluated. From this results, we found that Bursa-wolf model is more suitable than others for the determination of transformation parameters in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.405-413
• /
• 2002

It is crucial that we should set proper standards capable of efficiently handling new corrections of maps, connections of edges on the maps, administrative districts, and inter-scale connections in order to make serial cadastral maps. This study drew a two dimensional Parameter using an indent point, as a Review Control Point, on forest screening line or boundary line of administrative district. The study also introduced a few different transformations such as Affine Transformation, N-Degree Polynomial Transformation, and Projective Transformation, the two dimensional transformation methods to apply them to the connection of cadastal·forestry maps and the connection of parcels between the administrative districts, on the forestry map designed by discretionary edges on the maps per district unit with parcel numbers and tried to apply the coordinates transformation method to connections of maps to make serial cadastral maps.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.71-83
• /
• 2003

In this paper, a novel transcoding algorithm for the G.729A and the Selectable Mode Vocoder(SMV) vocoders via direct parameter transformation is proposed. In contrast to the conventional tandem transcoding algorithm, the proposed algorithm converts the parameters of one coder to the other without going through the decoding and encoding processes. In transcoder from SMV to G.729A, LSP conversion algorithm, pitch delay conversion algorithm and transcoding algorithm in lower rate are proposed, and in transcoder from G.729A to SMV, LSP conversion algorithm, pitch delay conversion algorithm and rate selection algorithm are proposed. Evaluation results show that while exhibiting better computational and delay characteristics, the proposed algorithm produces equivalent or Improved speech quality to that produced by the tandem transcoding algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.560-564
• /
• 1996

A mixed H$^{2}$/$H^{\infty}$ controller design method for linear systems with time delay in all variables and parameter uncertainties in all system matrices is proposed. Robust $H^{\infty}$ performance and H$^{2}$ performance condition that accounts for model-matching of closed loop system and disturbance rejection is also derived. With expressing uncertain system with linear fractional transformation form, we transform the robust stability and performance problem to the H$^{2}$/$H^{\infty}$ optimization problem and design a mixed H$^{2}$/$H^{\infty}$ controller. Using the proposed method, mixed H$^{2}$/$H^{\infty}$ controller for underwater vehicle with time delay and parameter variations are designed. Simulations of a design example with hydrodynamic parameter variations and disturbance are presented to demonstrate the achievement of good robust performance.t performance.ance.

• Korean Journal of Metals and Materials
• /
• v.56 no.11
• /
• pp.779-786
• /
• 2018

There have been previous attempts to observe the occurrence of dynamic ferritic transformation at temperatures even above $Ae_3$ in a low-carbon steel, and not only in steels, but recently also in titanium alloys. In this study, a new approach is proposed that involves treating true stress-true strain curves in uniaxial compression tests at various temperatures, and different strain rates in 0.1C-6Ni steel, which is a model alloy used to decelerate the kinetics of ferrite transformation from austenite. The initial flow stress up to peak stress was used to analyze the change in dynamic softening phenomena, such as dynamic recovery, dynamic recrystallization, and dynamic transformation. It is worth mentioning that for predicting the occurrence of dynamic transformation, flow stress before reaching peak stress is much more sensitive to the change in the dynamic softening rate due to dynamic transformation, compared to peak stress. It was found that the occurrence of dynamic ferritic transformation could be successfully obtained even at temperatures above $Ae_3$ once the deformation condition was satisfied. This deformation condition is a function of both the strain rate and the deformation temperature, which can be described as the Zener - Hollomon parameter. In addition, the driving force of dynamic ferritic transformation might be much less than that of the dynamic recrystallization of austenite at a given deformation condition. By applying this technique, it is possible to predict the occurrence of dynamic transformation more sensitively compared with the previous analysis method using peak stress during deformation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.1
• /
• pp.37-45
• /
• 1993

We research on the coordinate transformation between Korean geodetic system and WGS 1984. We made the wide area an object of our research. This area covers the range of longitude $1^\circ$ 32'and latitude $1^\circ$ 7'and is four times wider than a first stage research published in 1992. For this research, we performed GPS observations at 10 control point (seven astrogeodetic points, three triangulation points) and eight banch marks nearby control points, and then transformed the coordinates of WGS 84 to Korean geodetic system using the 7 parameter method, Molodensky method and MRE method. From this test, we compared the precision of the coordinate transformation by each method and checked which method is more applicable to Korea. We could find that the precision by 7 parameter method is three times better than the other methods and that the coordinate transformation by 7 parameter method is possible with the precision of 0".017, 0".016, 0.329 m in latitude, longitude and height. We could check and correct the height blunder of the control points by the bench marks nearby control point. We also could find the precision of coordinate transformation is more improved by the correction of height blunder.t blunder.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.692-699
• /
• 1991

In this paper, graphical representations of parameter variations affected by series or parallel feedback in the load plane were studied. As a result of transformations, all parameters of 2-port was converted to circles, and the step of noise circles and gain circles was 0.1 dB and 1dB, respectively. Compared with conventional commercial CAD softwares, the circuit design procedures could be verified much more systemically. This CAD was programmed in C-language and executed in IBM-PC with VGA graphic adaptor.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.87-91
• /
• 2009

Welding is one of the most important joining processes and the effect of welding residual stresses in the structure has a great deal of influence on its quality. In this paper, recent development in computational welding mechanics, particularly calculation of welding residual stresses, is introduced. The hypoelastic formulation of finite element analysis for thermoelastic-plastic deformation is applied to welding processes to find residual deformations and stresses. Leblond's phase evolution equation coupled with the energy equation is employed to calculate the phase volume fraction; this plays an important role as a kinetics parameter affecting phase fraction effects in the mechanical constitutive equation of welded materials. Furthermore, transformation plasticity is taken into account for an accurate evaluation of stress. The influence of the phase transformation and the transformation plasticity on residual stress is investigated by means of numerical analyses using metallurgical parameters in Leblond's phase evolution equation that are adjusted with respect to various cooling rates in a CCT-diagram. Coding implementation is conducted by way of the ABAQUS user subroutines, UMAT.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.14-20
• /
• 2018

The purpose of training a convolutional neural network (CNN) is to obtain weight factors that give high classification accuracies. The initial values of hyper-parameters affect the training results, and it is important to train a CNN with a suitable hyper-parameter set of a learning rate, a batch size, the initialization of weight factors, and an optimizer. We investigate the effects of a single hyper-parameter while others are fixed in order to obtain a hyper-parameter set that gives higher classification accuracies and requires shorter training time using a proposed VGG-like CNN for training since the VGG is widely used. The CNN is trained for four datasets of CIFAR10, CIFAR100, GTSRB and DSDL-DB. The effects of the normalization and the data transformation for datasets are also investigated, and a training scheme using merged datasets is proposed.