• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.307-311
• /
• 2003

2-mass system is generally used as controller of the variable-speed to transfer electromotion power to mechanical load such as industrial robot, driving parts of electric vehicle, rolling machine system of steel plant and driving parts of elevator. In this case, PI controller is often used as a velocity controller because of simplicity of system. But PI control algorithm is not enough for obtaining the control characteristics required for this system. To solve this problem, 2-mass system based on the PID controller derives the optimum PID parameters by pole assignment and estimation of the ITAE performance index. In this case, the system have tenacious properties about disturbance, but it causes extreme overshoot and vibration because of rapidly output of controller in early transient response about desired value. And if speed control system is applied by 2-DOF parameter ${\alpha}$, a temporary value, we must induce most suitable parameter by complicate pole assignment and estimation of the ITAE performance index whenever ${\alpha}$ changes. In this paper, to solve this problem we suggest control algorithm to followed exactly value of ${\alpha}$ as 2-DOF parameter by using fuzzy algorithm . So, intelligence algorithm modeled by human knowledge, experience, teachability and judgment follow exact ${\alpha}$ value and it can compose the efficient 2-DOF PID controller to improve following performance, overshoot decrease.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.163-168
• /
• 2001

A manipulator for test-cup attachment modules, which was a part of a robot milking system, was developed to reduce cost and labor for cow milking processing. A Cartesian coordinate manipulator was designed for the milking process, because it was quite flexible and can be constructed more economically than any other configuration. The manipulator was made use of DC motors, screws for power transmission, a RS422 interface system for the transmission of coordinate values and a one-chip microprocessor, 89C52. Performance tests of the manipulator were conducted to measure experimentally the precision of all axes. Some of the results are as follows. 1. The Cartesian coordinate manipulator was designed and built. Dimension of the three perpendicular axes (X, Y, and Z) and one arm’s axis(W) to pick up and transfer the modules were 700㎜$\times$450㎜$\times$550㎜$\times$650㎜. The arm’s axis moved the teat-cup attachment module, which attached four teat-cup to four teats, detached four teat-cup from four teats, was designed and manufactured by using CAD, CAM and CNC. 3. After 10 replications of exercising the manipulator, mean precision values(positioning error) of X, Y, Z axes wee 0.48㎜, 0.20㎜, 0.19㎜, respectively. Therefore, we conclude the axes to have a precision better than 0.5㎜, had no problem to operate correctly the milking manipulator.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1868-1874
• /
• 2007

We have developed a robotic system for an automated parallel cell cultivation process that enables screening of induction parameters for the soluble expression of recombinant protein. The system is designed for parallelized and simultaneous cultivation of up to 24 different types of cells or a single type of cell at 24 different conditions. Twenty-four culture vessels of about 200 ml are arranged in four columns${\times}$six rows. The system is equipped with four independent thermostated waterbaths, each of which accommodates six culture vessels. A two-channel liquid handler is attached in order to distribute medium from the reservoir to the culture vessels, to transfer seed or other reagents, and to take an aliquot from the growing cells. Cells in each vessel are agitated and aerated by sparging filtered air. We tested the system by growing Escherichia coli BL21(DE3) cells harboring a plasmid for a model protein, and used it in optimizing protein expression conditions by varying the induction temperature and the inducer concentration. The results revealed the usefulness of our custom-made cell cultivation robot in screening optimal conditions for the expression of soluble proteins.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2018

The technology convergence of television, communication, and computing devices enables the rich social and entertaining experience through Smart TV in personal living space. The powerful smart TV computing platform allows to provide various user interaction interfaces like IR remote control, web based control, body gesture based control, etc. The presently used smart TV interaction user control methods are not efficient and user-friendly to access different type of media content and services and strongly required advanced way to control and access to the smart TV with easy user interface. This paper propose the optical wireless communication (OWC) based remote controller design for Smart TV using smart device Flashlights. In this approach, the user smart device act as a remote controller with touch based interactive smart device application and transfer the user control interface data to smart TV trough Flashlight using visible light communication method. The smart TV built-in camera follows the optical camera communication (OCC) principle to decode data and control smart TV user access functions according. This proposed method is not harmful as radio frequency (RF) radiation does it on human health and very simple to use as well user does need to any gesture moves to control the smart TV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.179-189
• /
• 2000

Recently, due to the increasing interests in deep sea development, all possible efforts to the development of underwater unmanned working vehicles such as AUV(Autonomous Underwater Vehicle) or underwater robot are exerted. This paper proposes a new efficient acoustic-based underwater image data communication system, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allowsfast data transmission through the multiple ultrasonic communication channel. Proposed system consists of an acoustic transducer which operates at 136kHz center frequency and it's 10kHz bandwidth, pre-amplifier, $\pi/4 QPSK$(Quadrature Phase Shift Keying) modulation/demodu-lation method, image compressing method using JPEG technique and modified Stop & Wait protocol. The experimental result of the system make it possible to transfer the underwater image as a high throughput at the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation in the water.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.195-199
• /
• 2005

Semi automatic welding method to use carriage for welding at large size block manufacture welding process of present shipbuilding industry is used much. Carriage is device that transfer welding torch in horizontal fillet weld here, but because it is no function that chase welding like robot welding method, use can be impossible in curved line welding, and simply use in straight line welding. Also, because it is no function that chase welding, though welding mistake corrects this happening often in straight line welding, much times and expense are cost. Added welding chase sensor and 80C196KC microcontroller that use strain gauge to carriage that is using present in paper that see hereupon and manufacture a private line model and container box model welding because developing system that can chase welding automatically straight line and curved line welding establishing and investigate about chase phenomenon.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7773-7780
• /
• 2015

Analysis of existing kettle and its heating system has been the topic for localization technology development. Test pieces are made, polished and etched for existing kettle analysis. Surface of test pieces is observed using SEM, the kettle is verified to be made by deep drawing process from Ferrite-Perlite material. The kettle is also identified to be plated $16{\sim}49{\mu}m$ of thickness with Nickel(16%). Also heat transfer characteristics based on hot wire arrangement is investigated and optimal hot wire system is developed. Developed control system detects overheating and stops the whole system on the long operating time. Developed kettle takes the performance evaluation test for volume expansion and satisfied for standard 'KS G3602'.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4130-4135
• /
• 2013

This paper is a special-purpose machine studies for processing various patterns on the surface of the stone. We have developed a special-purpose machine that can be applied in various patterns upon the surface treatment of the stone with the water jet. The special-purpose machine is Configured of Transfer mechanism, motion controller, multi-nozzle mechanism, ultra high pressure water control system and S/W. We conducted a performance evaluation experiments of the pattern. We have developed a special-purpose machine with a precision of machining error ${\pm}0.5mm$ and pattern processing of various types.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1675-1683
• /
• 2018

This paper is a study on modeling of an NFC antenna to be inserted into a steel pallet for conveying selected good products through a vision system to a threaded screw from CNC equipment. The CNC equipment used here incorporates the information communication technology (ICT) corresponding to the Internet of Things (IoT), and the smart factory system technology that produces information by exchanging information freely in two directions by connecting the POP corresponding to the service Internet is evolved Equipment. Therefore, it is possible to collect position information on the threaded workpiece by applying NFC antenna designed considering iron pallet used for material management so as to grasp estimated completion time and actual production amount according to production instruction from existing analog type equipment to POP monitoring system And investigated its characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.307-309
• /
• 2016

This paper present about the system for sensing and controlling a wireless power transfer system using bluetooth protocol in robot, healthcare, smart-grid, and autonomous car. Recently a variety of applications using the Internet of Things (Internet of Things) and machine to machine (Machine to Machine) have been raised in many industries. To do this, it requires the fusion technology which is constituted with control, computing and networking. Embedded system is centered existing control system and Cyber Physical System(CPS) is the systems which was converged of a computing technologies using a wired or wireless network. CPS was adopted in the future government-led technology in the United States and Europe and is being pursued in cooperation with institutes, industries, and academia. In this paper, we implement and describe a technique for controlling the system for transmitting power wirelessly by sensing method using the matching of CPS technology concepts.