• 가족자원경영과 정책
• /
• 제23권2호
• /
• pp.61-78
• /
• 2019

The purpose of this study was to examine the resource transfer process from female baby boomers to their children who have gotten married or plan on getting married. The following research questions were explored. (1)To what extent have female baby boomers been transferring their resources to their children supporting marriage or vice versa? (2)What are the opinions of female baby boomers on future resource transfer plans to their children? (3)What are the opinions of female baby boomers on supporting themselves in their old age, and those of their children on supporting their aging parents? In-depth interviews were conducted with 11 female baby boomers who were born between 1955 to 1963. A case study research method was used to analyze the interview results. The findings were as follows. First, economic resource was the most common type of resources that the interviewees transferred to their children. Those who could not transfer their economic resources instead transferred their instrumental resources. Second, it was anticipated that the current trend of interviewees' resource transfers would be similar in the future. In other words, those who used to transfer a large amount of economic resources to their children showed their willingness to do the same in the future. Third, the interviewees did not expect support from their children, but rather were trying to prepare for their old age by themselves. Based on the overall results, the female baby boomers' transferring economic resources to their children implied that they took responsibility for their children. This appears to stem more from to altruistic motivation than reciprocal motivation. Moreover, it can be cautiously concluded that female baby boomers have different perspectives on the transfer of their resources from male's since the interviewees had different opinions on it from their husbands'.

• 항공우주시스템공학회지
• /
• 제10권4호
• /
• pp.90-97
• /
• 2016

항공우주연구원은 천리안위성의 임무를 승계하기 위해 2018년과 2019년 발사를 목표로 정지궤도복합위성 2A와 2B를 개발하고 있다. 정지궤도복합위성은 아리안 V 발사체에 의하여 발사되어 전이궤도(Transfer Orbit)에 전입한 후 여러 번의 액체원지점엔진분사를 통하여 표류궤도에 진입한다. 액체원지점엔진의 분사시기, 분사시간, 각 분사간의 간격 등은 위성이 목표하는 표류궤도에 진입할 수 있도록 선정되고 적용된다. 정지궤도복합위성의 경우 표류궤도 진입을 위하여 4회의 액체원지점엔진 분사를 수행할 계획이다. 본 논문에서는 미리 정의된 제한조건을 고려하고 외부 교란력을 고려하여 정지궤도복합위성의 액체원지점엔진 분사계획을 수립하였다. 여기서는 단일계산(Single Shot) 방식과 반복계산에 의한 최적화 기법, 두 가지 접근을 고려하였다. 최적의 해를 얻기 위해 Focusleop이라고 하는 발사초기임무해석 도구를 적용하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.266-271
• /
• 2003

Many port states such as New Zealand. the USA. Australia and Canada have strict regulations to prevent ships which arrive in their port from discharging polluted ballast water which contain harmful aquatic organism and pathogens. They are notified that transfer of polluted ballast water can cause serious injury to public health and damage to property and environment. For this reason. they perceived that the ballast exchange in deep sea is the most effective method. together with submitting the ballast management plan which contains the effective exchange method. ballast system and safety consideration. In this study, we make an effort to develop optimum ballast water exchange management and in result of that. it provide more convenient and stable process to prepare ballast water management plan for Bulk Carrier.

• 에너지공학
• /
• 제13권1호
• /
• pp.40-50
• /
• 2004

Treatise that see executed investigation analysis about energy conservation technology, which skill move and skill class of introduction subject, transferㆍintroduction skill form, present condition of technology transferㆍintroduction and necessity etc. to energy conservation technology by program of Korea energy basis plan (1997∼2006) etc. Enforced company which questionnaire object achieves from the end 107 assignment practical used of energy conservation technology development propulsion assignment of Korea energy management corporation (KEMCO) to 1998-200 years and 416 companies related energy saving technology constructed to Korea Institute of Energy Research (KIER) database by post investigation and visit investigation. Question investigation result, transferㆍintroduction fields of energy conservation technology are industry sector, the enterprise size appeared with the fact that the small and medium enteifrise is many most. Also, technology transferㆍintroduction section is plan technique, form with technical cooperative form, amount of money 50,000,000 won under, appeared above 1 years in disturbance duration. In hereafter, technology transferㆍintroduction plan it appeared with the fact that the plan technique is many most.

• 지능정보연구
• /
• 제4권1호
• /
• pp.1-10
• /
• 1998

Process planning is a very complex task and requires the dynamic informatioon of shop foor and market situations. Process plan selection is one of the main problems in the process planning. In this paper, we propose a new process plan selection model considering operation flexibility for the computer aided process planing. The model is formulated as a 0-1 integer programming considering realistic shop factors such as production volume, machining time, machine capacity, transportation time and capacity of tractors such as production volume, machining time, machine capacity, transportation time capacity of transfer device. The objective of the model is to minimize the sum of the processing and transportation time for all parts. A genetic algorithm a, pp.oach is developed to solve the model. The efficiency of the proposed a, pp.oach is verified with numerical examples.

• 한국산업정보학회논문지
• /
• 제15권1호
• /
• pp.73-83
• /
• 2010

글로벌 경쟁시장에서의 중소기업의 기술 경쟁력 향상을 위하여 기술이전의 중요성이 점차 증대되고 있다. 그러나 우리나라의 중소기업들은 영세하여 자체 기술개발이 어렵고 기술이전을 위한 준비가 되어 있지 않다. 또한 개발된 기술이 중소기업에 이전되어 사업화에 성공하는 비율이 낮기 때문에 기술경쟁력 확보에 어려움을 겪고 있다. 따라서 본 논문에서는 우리나라 중소기업의 "이전기술개발지원사업"에 관한 현황을 파악하여 성공적인 기술이전 방안을 모색하고자 한다. 이를 위하여 2006년 중소기업기술정보진흥원에서 실시한 이전기술개발지원사업에 참여한 중소기업을 대상으로 설문조사와 방문조사를 실시하였다. 분석 결과, 성공적인 기술이전을 위해서는 1)최종소비자의 요청과 판매를 고려한 기술 개발이 중요하고 2)완성도 높은 기술을 이전받아야 하며 3)개발 기간 중 시장동향 파악의 노력이 필요하며 4)지속적인 마케팅 자문이 필요한 것으로 나타났다. 정책적으로는 자문관제도를 도입하여 중소기업의 기술이전 전 단계에 걸친 지도가 필요한 것으로 조사되었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권2호
• /
• pp.121-138
• /
• 2001

Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

• World Technopolis Review
• /
• 제1권3호
• /
• pp.206-225
• /
• 2012

The development of the Surrey Research Park by the University of Surrey is an addition to a number of existing strategies to collaborate with industry that it has developed over its 120 year history. The potential to undertake this development was based on owning a substantial land holding that the University acquired when the Borough Council for the town of Guildford invited the University to relocate from Battersea in London to its new location in 1966. Initial plans for the Park in 1979 were accelerated in 1981 in response to plans by the then government to reduce funding for Higher Education in the UK. Beyond a broad master plan for the site that was based on topography and access to the site the plans that were developed were based on a survey of 100 companies that were deemed to be in the target market for the site and a review of the other 7 science parks that were being developed in the UK in 1981. The findings from this proved to be important in developing the master plan for the site. Another important influence on the project was the objectives that were defined for the 3 stakeholders in the project of the University, the tenant companies and the planning authority relate to economic development, a competitive advantage of tenant companies, knowledge transfer, the profile for the University and the capacity to generate income proved to be a valuable framework on which to develop a master plan. These details were underpinned by five objectives which served the three stakeholders in the site. Those for the University included commercial potential, knowledge transfer and image and reputation; those for the town primarily related to economic development and the plan was to help tenants gain a competitive advantage by locating on the site. In addition a number of success indicators were defined for the project against which to measure performance and have remained as a useful set of parameters on which to base the assessment of the performance of the site. In combination with these indicators a further analysis deals with the success factors that are considered as important in influencing performance. The paper sets details the history of the park and covers the success indicators and factors and reviews these in the context of the original objectives for the site.

• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.207-221
• /
• 2010

This study aim to suggest how alter the korean traditional image design for umbrellas by sublimation transfer digital textile printing. Umbrellas are highly depend on design and made from polyester fiber which is proper item to utilize sublimation transfer digital textile printing. Sublimation transfer digital textile printing system can use computer system to create the delicate high dense images and one full layout through the hole umbrella. It can create distinctive style of design compare with former screen printing umbrella design. As a result of this study, Korean traditional images were adopted and recreated for umbrellas as the modern practical item. 7 of umbrella designs were developed and sample umbrellas could be produced in short period comparing with screen printing process. Through this study, as green printing process, sublimation transfer digital textile printing will be more applied to manufacture high quality textile products along with design development, thus it is expected as an alternative plan to leads growth of umbrella industries.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.53-59
• /
• 1997

Current CAD systems used in the AEC community have some critical problems. One of them is that they hardly support design collaboration. Thus designers and engineers are hard to transfer design knowledge from one discipline to another. What we need is a common building database which creates and manages building plans/models and relevant design knowledge consistently and effectively. This paper presents a powerful CAD editor, called UNIFORM, which is being developed. Currently UNIFORM includes three main modules: a plan generator, a 3-D model generator, and component databases. A plan generator, called UNIFORM PLANNER, creates a plan which contains semantically-rich information of building. Each component in the plan can be presented in various ways and connected to component databases that contain knowledge of building components such as windows, doors, walls, etc. Based on the plan UNIFORM MODELER, another module of the program, generates a three dimensional building model which could be a multiple-story building. One of the main ideas behind the system is that it generates and maintains a common building form that can be easily delivered to other members of the project team. Thus it is expected to increase system integration, team interactions, and productivity.