• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2262-2275
• /
• 2022

The Korea Atomic Energy Research Institute (KAERI) studied the sodium-water reaction (SWR) minimized steam generator for the safety of the sodium-cooled fast reactor (SFR), and selected the copper bonded steam generator (CBSG) as the optimal concept. This paper introduces the conceptual design of the CBSG and the development of the CBSG sizing analyzer (CBSGSA). The CBSG consists of multiple heat transfer modules with a crossflow heat transfer configuration where sodium flows horizontally and water flows vertically. The heat transfer modules are stacked along a vertical direction to achieve the targeted large heat transfer capacity. The CBSGSA code was developed for the thermal-hydraulic analysis of the CBSG in a multi-pass crossflow heat transfer configuration. Finally, we conducted a preliminary sizing and rating analysis of the CBSG for the trans-uranium (TRU) core system using the CBSGSA code proposed by KAERI.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2019

Graphene is a fascinating material for fabricating flexible and transparent devices owing to its thickness and mechanical properties. To utilize graphene as a core material for devices, the transfer process of graphene is an inevitable step. The transfer process can be classified into wet and dry methods depending on the surrounding environment. The adhesion between graphene and a target substrate determines the success or failure of the transfer process. As the surface energy of graphene is an important parameter that provides adhesion, it is useful to estimate the surface energy to understand the mechanisms of the transfer process. However, the exact surface energy of graphene is still disputed because the wetting transparency of graphene depends on the polarity of the liquid and target substrate. Previously reported results use graphene transferred by the wet method. However, there are few reports on the surface energy of graphene transferred by the dry method. In this study, the surface energy of graphene transferred by the wet and dry methods is estimated. Wetting transparency occurs for certain combinations of liquids and substrates. For graphene on a polar substrate, the surface energy decreases by 25 and 35% for the wet and dry transfer methods, respectively. However, the surface energy of graphene on dispersive substrates decreases by ~10% regardless of the transfer method. In conclusion, the surface energy of graphene is $36{\sim}38mJ/m^2$, and differs depending on the transfer method and polarity of the substrate.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.2
• /
• pp.491-521
• /
• 2018

This paper aims to uncover success factors in technology transfer of Korean government sponsored research institutes. It presents an analytical framework of technology transfer integrating factors concerning actors, object and process. Qualitative analysis mainly based on In-depth interviews is designed and conducted to examine characteristics, similarities and differences of three types technology transfer including a supply-push model, a demand-pull model, and an interactive model. Empirical results show that capabilities and experiences of researchers, capabilities and willingness of the company and active communications in the technology transfer appear to be important factors. In particular, it was found that technology transfer was led by TLO in the demand-pull model. In addition, the demand-pull and interactive approaches tends to be more effective in the technology development and transfer process compared to the supply-push model. In other words, market-oriented R&D is needed instead of technology-driven R&D. This paper also pointed out that one of the major factors in successful technology transfer is the enhancement of TLO capacity, and the improvement of recognition about TLO.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.74-85
• /
• 2018

This study has analyzed the convective heat transfer on the deck exposed to the high-temperature impingement exhausting from a VTOL vehicle. The heat flow of the impingement on the deck is modeled by the convection heat transfer. The convective heat flux generated by the hot impinging jet is investigated by using both convective heat transfer formulation and conjugate heat transfer formulation. Computational fluid dynamics(CFD) code was used to compute the heat flux distribution. The RANS equation and the k-e turbulence model were used to analyze the thermal flow of the impinging jet. The heat flux distribution near the stagnation zone obtained by the conjugate heat transfer analysis shows more reasonable than the convective heat transfer analysis.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.189-199
• /
• 2018

This study was intended to identify the factors effecting the business performance of the firms that received public technology transfer and to suggest implications on the basis of the results. For this purpose, the author empirically analyzed the influence of the technology value on the business performance of the firms using the business data of the firms on the basis of quantitative data. Furthermore, the author analyzed the differences in perception of technology value and business performance according to type of firms and type of technology transfer. As a result of this study, it was found that the more advanced technology, the more positive influence on business performance of the firms, and that there was no difference in perception of business performance whereas there was difference in perception of technology value according to the type of firms and technology transfer. This study is meaningful in that through this study the author has confirmed the importance of technology value to enhance competitiveness of technology transfer companies and strategic direction for successful implementation of technology transfer.

• Journal of Technology Innovation
• /
• v.12 no.2
• /
• pp.151-183
• /
• 2004

This paper investigates the evolution of 'inter-firm' technology transfer in the Thai automobile industry, which has gradually been integrated into global production network of some specific automotive models(one-ton pickups). This paper discusses the linkage between the role of automobile assemblers in transferring technology and the way their strategic changes bring about heightened demands on the technological capacity of suppliers and the contents of technology transfer. With higher competition at the global level, local suppliers are required to improve their technical and managerial skills, especially in the area of 'product engineering' capability. The authors examine the ways local firms have adapted to these changes in their environments, as well as the ways they utilize inter-firm relationship with automobile assemblers as a means to improve their own technological capabilities. The dynamic process of capability formation in local parts firms, through intensive efforts and learning inducements brought about by inter-firm relationships, are also discussed.

• Educational Technology International
• /
• v.9 no.1
• /
• pp.79-96
• /
• 2008

The issue of connection between entities has a lengthy history in educational research, especially since it provides the necessary bridge between base and target in analogical transfer. Recently, the connection has been viewed through the application of technology to bridge between sequences in order to be cognitively useful. This study reports the effect of sequence type (AT vs. TA) and connection type (fading vs. popping) on the achievement and analogical transfer in a multimedia application. In the current research, 10th -grade and 11th -grade biology students in Korea were randomly assigned to five groups to test the effects of presentation sequence and entity connection type on analogical transfer. Consistent with previous studies, sequence type has a significant effect: analogical transfer performance was better when base representations were presented first followed by target representations rather than the reverse order. This is probably because presenting a familiar base first helps in understanding a less familiar target. However, no fully significant differences were found with the entity connection types (fading vs. popping) in analogical transfer. According to the Markman and Gentner's (2005) spatial model, analogy in a space is influenced only by the differences between concepts, not by distance in space. Thus connection types fail on the basis of this spatial model in analogical transfer test. The findings and their implications for sequence and connection research and practice are discussed. Leveraging on the analogical learning process, specific implications for scaffolding learning processes and the development of adaptive expertise are drawn.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.1
• /
• pp.153-164
• /
• 2012

Recently, as the one way of open Innovation management, Not a company's sole activity, but technology development and infrastructure buildup between companies for the synergistic effect of technological innovation, and technology transfer commercialization is needed. For a successful technology commercialization, it needs many experts like technology transfer agents, A technology transfer agent can be qualified with finishing its registration education course over 40 hours on the basis of the article 14 of law on the Promotion of Technology Transfer and the article 21 of the enforcement. After the 2010 revision of notice, the incorporated company, the Korea Technology Transfer agents has conducted the registration education. Until now, educations were conducted twice in January 2011 and November 2011. Accordingly, this study is necessary to improve the education service's quality and seek remedy through the in-depth evaluation of the present basic education service's quality. The results are as in the following. First, the service quality affect the satisfaction of the education service's quality positively. It is identified that the details of service quality of flexibility, reliability, responsiveness, conviction, and sympathy influence the education service satisfaction positively. Second, the education service satisfaction affects the attitude positively after completing the course. Third, service quality affects the attitude after completing the education course, Also it is identified that the details of service quality of flexibility, reliability, responsiveness, conviction, and sympathy influence the attitude after education completion. It is expected that this research may be used as the basic information for establishing education improvements and be helpful in establishing the technology transfer agents' registration education strategy. Through a continuous research, it is also expected that technology transfer markets are accelerated and qualified technology transfer agents are trained.

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.157-175
• /
• 2016

It was found that the lateral stiffness changes obvious at the transfer position of the section configuration from SRC to RC. This particular behavior leads to that the transfer columns become as the important elements in SRC-RC hybrid structures. A comprehensive study was conducted to investigate the seismic behavior of SRC-RC transfer columns based on a low cyclic loading test of 16 transfer columns compared with 1 RC column. Test results shows three failure modes for transfer columns, which are shear failure, bond failure and bend failure. Its seismic behavior was completely analyzed about the failure mode, hysteretic and skeleton curves, bearing capacity deformation ability, stiffness degradation and energy dissipation. It is further determined that displacement ductility coefficient of transfer columns changes from 1.97 to 5.99. The stiffness of transfer columns are at the interval of SRC and RC, and hence transfer columns can play the role of transition from SRC to RC. All specimens show similar discipline of stiffness degradation and the process can be divided into three parts. Some specimens of transfer column lose bearing capacity swiftly after shear cracking and showed weak energy dissipation ability, but the others show better ability of energy dissipation than RC column.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.45-68
• /
• 2009

The Korean government is actively pursuing an ambitious IT strategy to establish Korea as one of the leaders in the world IT market. To implement the strategy, successful technology transfer from research institutions to market should be achieved. Comprehensive literature identifies sixteen variables affecting the process and results of technology transfer. The research results in four key factors in technology transfer: Communication, Distance, Equivocality, and Motivation. Communication refers to the degree to which a medium is able to efficiently and accurately conveys task-relevant information and media while distance involves both physical and cultural proximity. Equivocality refers to the degree of concreteness of technology to be transferred while motivation involves incentives for and the recognition of the importance of technology transfer activities. Further analysis shows that there are four distinctive clusters and they show very contrasting characteristics in terms of four key factors. The careful mapping of the four clusters on the four key factors show very informative technology transfer patterns, the Technology Transfer Grid.