• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2008

The output of the Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide basic data for the design of regenerator matrix, characteristics of flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, two different wire screens were used. The results are summarized as follows; 1. With the wire screen of No. 50 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 3 times higher than that of one directional flow, not too much influenced by the number of packed meshes. 2. With the wire screen of No. 100 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 2.5 times on the average higher than that of one directional flow, not too much influenced by the number of packed meshes. 3. Under one directional flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f=\frac{0.00326639}{Re\iota}-1.29106{\times}10^{-4}$$ 4. Under oscillating flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f_r=\frac{0.000918567}{Re\iota}+1.86101{\times}10^{-5}$$ 5. The pressure drop is shown as high in proportion as the number of meshes has been higher, and the number of packed wire screens as matrices increases.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.158-164
• /
• 2018

Multi-walled carbon nanotube (MWCNT)-copper (Cu) composites are successfully fabricated by a combination of a binder-free wet mixing and spark plasma sintering (SPS) process. The SPS is performed under various conditions to investigate optimized processing conditions for minimizing the structural defects of CNTs and densifying the MWCNT-Cu composites. The electrical conductivities of MWCNT-Cu composites are slightly increased for compositions containing up to 1 vol.% CNT and remain above the value for sintered Cu up to 2 vol.% CNT. Uniformly dispersed CNTs in the Cu matrix with clean interfaces between the treated MWCNT and Cu leading to effective electrical transfer from the treated MWCNT to the Cu is believed to be the origin of the improved electrical conductivity of the treated MWCNT-Cu composites. The results indicate the possibility of exploiting CNTs as a contributing reinforcement phase for improving the electrical conductivity and mechanical properties in the Cu matrix composites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.122-131
• /
• 2000

In this paper, we propose a cell scheduling algorithm for input queueing ATM switch. The input queueing architecture is attractive for building an ultra-high speed ATM (Asynchronous Transfer Mode) switch. We proposea WMUCS (Weighted Matrix Unit Cell Scheduler) based on the MUCS which resolves HOL blocking and outputport contention. The MUCS algorithm selects an optimal set of entries as winning cells from traffic matrix (weightmatrix). Our WMUCS differs from the MUCS in generating weight matrices. This change solves the starvationproblem and it reduces the cell loss variance. The performance of the proposed algorithm is evaluated by thesimulation program written in C++. The simulation results show that the maximum throughput, the average celldelay, and the cell loss rate are significantly improved. We can see that the performance of WMUCS is excellentand the cost-effective implementation of the ATM switch using proposed cell scheduling algorithm.

• Tissue Engineering and Regenerative Medicine
• /
• v.19
• /
• pp.553-563
• /
• 2022

BACKGROUND: Autologous fat grafting is one of the most common procedures used in plastic surgery to correct soft tissue deficiency or depression deformity. However, its clinical outcomes are often suboptimal, and lack of metabolic and architectural support at recipient sites affect fat survival leading to complications such as cyst formation, calcification. Extracellular matrix-based scaffolds, such as allograft adipose matrix (AAM) and poly(lactic-co-glycolic) acid (PLGA), have shown exceptional clinical promise as regenerative scaffolds. Magnesium hydroxide (MH), an alkaline ceramic, has attracted attention as a potential additive to improve biocompatibility. We attempted to combine fat graft with regenerative scaffolds and analyzed the changes and viability of injected fat graft in relation to the effects of injectable natural, and synthetic (PLGA/MH microsphere) biomaterials. METHODS: In vitro cell cytotoxicity, angiogenesis of the scaffolds, and wound healing were evaluated using human dermal fibroblast cells. Subcutaneous soft-tissue integration of harvested fat tissue was investigated in vivo in nude mouse with random fat transfer protocol Fat integrity and angiogenesis were identified by qRT-PCR and immunohistochemistry. RESULTS: In vitro cell cytotoxicity was not observed both in AAM and PLGA/MH with human dermal fibroblast. PLGA/MH and AAM showed excellent wound healing effect. In vivo, the AAM and PLGA/MH retained volume compared to that in the only fat group. And the PLGA/MH showed the highest angiogenesis and anti-inflammation. CONCLUSION: In this study, a comparison of the volume retention effect and angiogenic ability between autologous fat grafting, injectable natural, and synthetic biomaterials will provide a reasonable basis for fat grafting.

• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.1
• /
• pp.22-29
• /
• 1995

Mobile bacterial particles can act as carriers and enhance the transport of hydrophobic contaminants in ground water by reducing retardation effects. Because of their colloidal size and favorable surface conditions, bacteria can act as efficient contaminant carriers. When such carriers exist in a porous medium, the system can be thought of as three phases: an aqueous phase, a carrier phase, and a stationary solid matrix phase. Contaminant can be present in either or all of these phases. In this study, a mathematical model based on mass balances is developed to describe the transport and fate of biodegradable contaminant in a porous medium. Bacterial mass transfer mechanism between aqueous and solid matrix phases, and contaminant mass transfer between aqueous and bacterial phases are represented by kinetic models. Governing equations are non-dimensionalized and solved to analyze the bacteria facilitated contaminant transport. The numerical results of the facilitation effect match favorably with experimental data reported in the literature. Results show that the contaminant transport can be described by local equilibrium assumption when Damkohler numbers are larger than 10. Significant sensitivities to model parameters, particularly bacterial growth rate and influent bacterial concentration, were discovered.

• Journal of Embryo Transfer
• /
• v.33 no.3
• /
• pp.99-105
• /
• 2018

To determine the differences in the in-vitro ovum maturation process of bovine, we compared the expression of MMPs in these oocytes and cumulus cell throughout oocytes maturated. In an attempt to investigate the effect of MMP activation and inhibitors in total protein of cumulus cell and, oocytes during oocytes maturation, we examined and monitored the localization and expression of MMPs (MMP-2 and MMP-9), TIMPs (TIMP-2 and TIMP-3), as well as their expression profiles (Real-time PCR, Gelatin Zymography and ELISA). Our results that the bovine oocytes MMP-2 and MMP-9 level was significantly associated with the rate of maturity of oocytes (P<0.05). In cumulus cell, MMP-2 was highly expressed in all stages of the oocyte's maturation. The final oocytes maturation exhibited strong gelatinase activity. There was no significant correlation between cumulus cell MMP-9 and the maturation rate of oocytes. However, for the oocyte cytoplasm MMP-9 expression was significant correlation to the maturation oocytes. There was no significant correlation between cumulonimbus cells MMP-9 and oocyte maturation rates; however, for oocyte cytoplasm, MMP-9 expression was significantly correlated with mature oocyte. However, the TIMP-1 and TIMP-2 protein expression patterns are not correlated with the maturation rate of the oocyte. Our results suggest that MMP different expression pattern may regulate the morphological remodeling of oocyte's in the cumulus cell. Further, the MMP-2 expression has a strong relation with a higher maturation rate of the oocyte.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.565-570
• /
• 2017

The various techniques proposed previously to obtain a good antireflection(AR) coating induce a scattering of incident light by nanoparticles or control the refractive index by using different materials. This paper compares a suggested graded index profile with the quintic index profile previously suggested for producing an index profile that gives good performance from an AR coating. We assume the structure of the AR coating has three, six, and nine layers with 180 nm total thickness. The wavelength of incident light ranges from 300 nm to 1100 nm. We use the transfer matrix theory for a single layer to obtain the reflectivity of three, six, and nine layers. The reflectivity of two different index profiles with three, six, and nine layers is compared. As a result, the suggested graded index profile shows lower reflectivity than the quintic index profile with three layers, especially in the wavelength range from about 600 nm to 1100 nm. Therefore, we expect that these results can be applied to optical devices and filters in the range from visible(red) to near infrared.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.183-189
• /
• 2004

As high quality digital cameras become readily available, digital cameras are being used not only for simple picture recording but also as information storing media in various fields. However, due to the fact that the spectral responses of the camera sensors are different from color matching functions of the CIE standard observer, the color can not be measured using these cameras. This study shows a method for converting camera image to sRGB image, in which color information is preserved. The transfer matrix between camera output signals and CIE stimulus values was determined using a multiple regression method with Macbeth ColorChecker as target colors. The CIE stimulus values for camera output signals can be mapped with a transfer matrix, and these values are converted to sRGB signals. As the result of testing a Kodak DC220 digital camera, the average color difference of Macbeth ColorChecker between true and displayed colors was 2.1 $\Delta$ $E_{ab}$ $^{*}$.$^{*}$.

• Journal of the Korean housing association
• /
• v.17 no.3
• /
• pp.61-69
• /
• 2006

Vertical vibrations on the slab of buildings are affected by types of vibration sources, transfer paths, and the material property and the size of members. Among these parameters, the vibration sources and the transfer path can not be controlled, but the property and the size of members can be controlled in the phase of design the members. In this study, the vibration responses according to the property and size of members were obtained by using a prediction program based on dynamic-stiffness matrix. Three parameters which are not usually considered as major factors for architecral planning were selected fur these analyses. They are the strength of materials, the thickness of wall and the thickness of slab. The ground vibration source located near a building was used as vibration input data in the analyses. This study has its originality on presenting appropriate property and size of structural members in order to reduce vertical vibration of slab in shear-wall structures. Analysing the results from the vibration estimation program according to the variations of parameters, the appropriate ratio among the sizes of structural members were proposed. From these results, the vibration level on the slab which is not constructed yet would be predicted and the vibration peak level can be reduced or shifted into the desirable frequency range. Therefore, the vertical vibration could be controlled in the phase of designing buildings.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.108-108
• /
• 2002

포유동물의 암컷 생식기관에 존재하는 다양한 종류의 matrix metallo-proteinase (MMP)는 난소와 자궁의 구성성분의 주기적인 변화를 조절하며 이중 난소의 MMP는 난포의 성장과 배란 그리고 퇴화 동안 조직재구성에 매우 중요한 역할을 한다고 알려져 있다. 본 실험에서는 근래에 새로 발견된 사람의 난포액에 존재하는 분자량 약 110kDa인 MMP-2 isoform GA110을 동정하고 자 하였다. 난포액으로부터 GA110 단백질을 분리하기 위하여 난포액에 5mM ethylenediaminetetraacetic acid(EDTA)를 처리한 후 DEAE Sepharose Fast Flow를 이용한 chromatography를 시행하였다. 그 결과, 난포액 단백질들은 0.2M NaCl 의 분획에서 GA110 활성을 나타내었고 anti-human MMP-2 antibody에 대한 면역반응도 뚜렷이 나타났다. DEAE Sepharose Fast Flow에서 얻은 분획 중 GA110의 활성과 면역반응을 모두 나타내는 분획만을 모아 Gelatin Sepharose 4B affinity chromatography로 다시 분리하였다 분리한 결과 resin에 흡착된 단백질 (eluate) 분획들에서 매우 뚜렷한 GA110 gelatinase 활성을 나타내었으며 면역반응 또한 관찰되었다. 이 분획들의 단백질을 농축한 후 zymography를 시행하여 나타난 GA110 단백질 band를 잘라 내었으며 이로부터 단백질을 electroelution하여 농축한 후 reducing agent인 2-mercaptoethanol를 처리하였다. 이를 전기영동 후 MMP-2 (propeptide region) antibody를 사용하여 immunoblotting 한 결과 70-72kDa의 단백질만이 면역반응을 나타내었다. 마지막으로 위와 같이 준비된 70-72kDa 단백질의 아미노산 서열을 Edman degradation 방법으로 분석하였다. 그 결과 이 단백질의 N 말단의 10개의 아미노산 배열 순서가 알려진 사람의 proMMP-2의 전체 배열순서 중 propetide domain의 N 말단에서부터 다섯 번째에서 시작하여 10개의 아미노산의 서열과 정확하게 일치하였다. 위 결과들로 미루어 사람의 난포액에 존재하는 MMP-2의 새로운 isoform인 GA110은 70-72kDa의 ProMMP-2가 disulfide bond를 통해 homodimer 구조를 이루고 있는 것으로 여겨진다.