• 제목/요약/키워드: Transfer loading system

검색결과 175건 처리시간 0.03초

파일 항타진동이 인접 비탈면에 미치는 영향 (Influence of Pile Driving-Induced Vibration on the Adjacent Slope)

  • 곽창원
    • 한국지반공학회논문집
    • /
    • 제39권5호
    • /
    • pp.27-40
    • /
    • 2023
  • 말뚝은 상부 구조물의 하중을 지지층으로 전달하는 구조체로 국내외 건설 현장에서 널리 사용되고 있다. 말뚝을 시공하는 방법은 지반조건, 시공위치, 주변현황, 환경적 요소, 공사비 등을 종합적으로 고려하여 결정하며 크게 직항타에 의한 타입방식과 선굴착 후 경타 또는 항타하는 방식으로 나눌 수 있다. 이 중 직항타는 말뚝 두부를 해머로 항타하여 원지반 내 소정의 심도까지 근입시키므로 항타 시 가해지는 에너지가 크고 이에 따른 항타진동 및 소음도 증가한다. 말뚝의 항타진동은 주변 시설물 및 지반에 영향을 미치므로 그 영향을 정량적으로 파악할 필요가 있다. 본 연구에서는 말뚝의 항타진동을 시간영역에서 산정하고, 직항타 시 말뚝과 인접하여 위치한 굴착면 및 가시설에 대하여 항타진동에 의한 영향을 유한차분해석법에 의한 2차원 동적수치해석을 통하여 분석하였다. 그 결과 파의 반사 및 재료감쇠가 적은 지표면에서 표면파에 의하여 지중보다 변위가 현저히 크게 발생하는 경향을 나타내었고 전체 변위 크기는 이격거리 증가에 따라 감소하나 수평방향 변위는 진동원과 먼 사면 상단부에서 연직방향 대비 더 큰 값을 보이며 법면부에 변위가 집중적으로 발생하는 특징을 확인하였다.

전과정평가를 이용한 유채재배의 환경영향 평가 (Environmental Impact Assessment of Rapeseed Cultivation by Life Cycle Assessment)

  • 홍승길;남재작;신중두;옥용식;최봉수;양재의;김정규;이성은
    • 한국환경농학회지
    • /
    • 제30권1호
    • /
    • pp.24-30
    • /
    • 2011
  • 유채 재배 전과정이 환경에 미치는 영향을 전과정평가 기법으로 분석하였다. 유채재배 과정을 평가하기 위해 비료, 농약, 농기계 사용에 따른 에너지 소비량, 작업시간 등을 조사하여 평가의 기능 단위인 유채 1톤을 기준으로 분석하였다. Eco-Indicator 95방법으로 8개 영향범주에 대해 전과정영향을 평가한 결과 유채 1톤을 생산하는데 온실가스 216 kg $CO_2$-eq., 오존층 고갈 3.98E-05 kg CFC-11-eq., 산성화 1.78 kg $SO_2$-eq., 부영양화 0.28 kg $PO_4$-eq., 중금속 5.23E-03 kg Pb-eq., 발암 물질 2.51E-05 kg B(a)p-eq., 스모그 1.24 kg SPM-eq., 에너지자원 6,460 MJ LHV의 영향을 미치는 것으로 나타났다. 이 중 90%가 화학비료에서 기인하는 것으로 분석되었다. 유채 생산량이 1 톤 증가하였을 경우에 대한 민감도 분석에서는 배출량은 동일하였으나 단위 면적당 생산량이 증가하여 유채 1톤에 대한 환경 부하는 22% 감소하는 것으로 평가되었다. 따라서 친환경농업 또는 자원순환농업을 통하여 화학비료의 사용량을 줄이면 유채 재배에 있어 농업부문 온실가스 배출량이 상당부분 감소될 것으로 판단되었다.

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

하수슬러지 처리를 위한 다축 스크류 난류 접촉식 건조기의 최적 설계 연구 (A Study on the Optimum Design of Multiple Screw Type Dryer for Treatment of Sewage Sludge)

  • 나은수;신성수;신미수;장동순
    • 대한환경공학회지
    • /
    • 제34권4호
    • /
    • pp.223-231
    • /
    • 2012
  • 본 연구는 유 무기성 폐기물 처리를 위한 다축스크류 난류접촉식 고효율 건조기의 최적 설계를 위한 연구의 일환으로 실험적 연구와 수치해석적 연구를 통하여 건조기 내부의 열유동 메카니즘을 규명하고 건조효율을 높일 수 있는 설계 기준을 제시 하고자 수행되었다. 사용된 건조기의 대표적인 특성은 건조용 가스의 바이패스 시스템으로 연소를 통해 얻어진 고온의 가스가 다축 스크류 내부 축을 따라 흐르면서 분공을 통해 고속으로 슬러지 내부로 분출되면서 열풍 건조를 하게 되는 것이다. 다양한 열원의 적용이 가능하고 고온 난류 분사식으로 높은 건조속도를 갖고 있으며 고점성 물질에도 적용이 가능한 것이 장점이다. 여기서 건조가스의 분배는 슬러지를 체적 가열하는 한편 슬러지가 뭉치지 않고 지속적으로 열과 물질 전달을 원활하게 하는 기공을 유지하도록 해야 한다. 실험결과 하수슬러지 200 kg/hr를 처리하는데 스크류를 1 rpm으로 회전시킬 때 적정 체류시간은 100분 정도로 나타났다. 또한 다양한 열량 공급 결과 150,000 kcal/hr로 공급한 경우 높은 건조효율을 유지하면서 잉여 열량공급으로 인한 과도한 열피로 및 열량의 낭비를 줄일 수 있는 것으로 나타났다. 유 무기성 슬러지의 설계기술 및 건조효율 향상을 위한 건조가스의 유동 및 온도분포를 수치해석적 연구를 통하여 계산하였으며 연소실과 건조실의 온도계산 결과는 실험 자료와 매우 유사하게 나타나서 성공적으로 비교검증을 수행하였으며, 향후 물질전달에 대한 세부적인 모델을 적용하여 연구를 지속적으로 수행할 예정이다.

"무역상무(貿易商務)에의 역사적(歷史的) 어프로치와 무역취인(貿易取引)의 전자화(電子化)" (E-Commerce in the Historical Approach to Usage and Practice of International Trade)

  • 춘홍차
    • 무역상무연구
    • /
    • 제19권
    • /
    • pp.224-242
    • /
    • 2003
  • The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

  • PDF