• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1948-1952
• /
• 2007

Heat transfer augmentation based on the process intensification concept in heat exchangers and thermal reactors has received much attention in recent years, mainly due to energy efficiency and environmental considerations. The concept consists of the development of novel apparatuses and techniques that, compared to those commonly used today, are expected to bring dramatic improvements in manufacturing and processing, substantially decreasing equipment size, energy consumption, and ultimately resulting in cheaper, sustainable technologies. The objective of this paper was to investigate the heat transfer characteristics of tubular thermal reactor using static mixing technology. Glycerin and water were used as the test fluids and water was used as the heating source. The results for heat transfer rate were strongly influenced by tube geometry and flow conditions.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.40-47
• /
• 1982

Heat transfer on packed bed is considered to be important for the effective designs of chemical reaction equipment, air conditioning system, and storage type heat exchanger, etc. Currently studies are being carried out quite actively in this field in order to increase the heat transfer efficiency. The effect of heat transfer is closely relater to materials, shapes, porosities and packing states of packed bed as well as mutual dimensional relations between particles and the container. Investigation shows that heat transfer results appear to be influenced by such parameters as fluid velocity through packed bed, mass flow, and thermal properties. It is noted that viscosity is also considered to be an important factor in this problem. In this study, effective thermal conductivities on packed bed, effects of thermal conductivity (Ke) and friction factor (Fk) according to change of porosity(.epsilon.) and Reynolds number(Reh(, and pressure loss of the fluid, are experimentally investigated. Results show that the effective thermal conductivity increases and the friction factor decreased, as against the increase of Reynolds number. But as the increase of porosity increase them both.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1545-1552
• /
• 2017

Identifying the load and mutual inductance is essential for improving the power transfer capability and power transfer efficiency of Inductive Power Transfer (IPT) systems. In this paper, a steady-state load and mutual inductance identification method focusing on series-parallel compensated IPT systems is proposed. The identification model is established according to the steady-state characteristics of the system. Furthermore, two sets of identification results are obtained, and then they are analyzed in detail to eliminate the untrue one. In addition, the identification method can be achieved without extra circuits so that it does not increase the complexity of the system or the control difficulty. Finally, the feasibility of the proposed method has been verified by simulation and experimental results.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.884-891
• /
• 2017

The improved transfer functions of the modified Sheppard-Taylor (MS-T) converter, which is capable of regulating output voltage under a wide range of input voltage and load variations, negligible current ripple, and fewer components in comparison to the Sheppard-Taylor (S-T) converter, operating in continuous conduction mode (CCM) are investigated in this study. Its DC equilibrium point, small signal model, and transfer functions are derived and analyzed. Then, the voltage controller is applied for this MS-T converter. The comparisons between the derived model and the existing model are presented. The hardware circuit is designed and the circuit experiments are provided for validation. The results show that the improved transfer functions of the MS-T converter are more effective and general than the previous ones for describing its real characteristics.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.67-73
• /
• 2018

The paper deals with an approach to time domain simulation for closed end at the downstream of pipe, hydraulic lines terminating into a tank and series lines with change of cross sectional area. Time domain simulation of a fluid power systems containing hydraulic lines is very complex and difficult if the transfer functions consist of hyperbolic Bessel functions which is the case for the distributed parameter dissipative model. In this paper, the magnitudes and phases of the complex transfer functions of hydraulic lines are calculated, and the MATLAB Toolbox is used to formulate a rational polynomial approximation for these transfer functions in the frequency domain. The approximated transfer functions are accurate over a designated frequency range, and used to analyze the time domain response. This approach is usefully to simulate fluid power systems with hydraulic lines without to approximate the frequency dependent viscous friction.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.645-660
• /
• 1997

An application of the genetic algorithm(GA) to the loading sequencing problem in port container terminals is presented in this paper. The efficiency of loading operations in port container terminals is highly dependent on the loading sequence of export containers. In order to sequence the loading operation, we hove to determine the route of each container handling equipment (transfer crane or straddle carried in the yard during the loading operation. The route of a container handling equipment is determined in a way of minimizing the total container handling time. An encoding method is developed which keeps intermediate solutions feasible and speeds up the evolution process. We determine the sequence of each individual container which the container handling equipment picks up at each yard-bay as well as the visiting sequence of yard-bays of the equipment during the loading operation. A numerical experiment is carried out to evaluate the performance of the algorithm developed.

• Journal of KSNVE
• /
• v.2 no.4
• /
• pp.273-280
• /
• 1992

The prediction of vibration response of floor is necessary in order to check whether the floor vibration level will satisfy the allowable vibration standard of precise machinery such as electronic microscopes in semiconductor manufacturing plant before the installation of various neighboring equipment facility. In conventional vibration isolation, we were mainly interested in minimization of vibration transmissibility and stabilization of vibration isolation system. But in order to predict vibration response of floor, it is necessary to know exciting force of equipment installed on the floor and the mobility of the floor. We measured the exciting force of the dropped mass assumed as equipment and the mobility of some practical building floor using large impact hammer. And from this we predicted the vibration response of floor on which the mass dropped. This predicted vibration response of floor is compared with measured vibration response. Through upper procedure, we examined the possibility of predicting vibration response of floor from the information of exciting force of equipment and the mobility of floor.

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.3
• /
• pp.93-109
• /
• 2007

The pre-hospital care in site transportation care and site care will be divided, it will follow in site or evacuation it will enforce it will can evacuate in condition of the emergency patient of like this at the initial stage and emergency care from inside fire fighting helicopter back transfer means and the manpower security of the specialty emergency necessary personnel(nursing and 1st EMT's) as the medical treatment agency and modernization of first aid equipment necessity inside American securing and fire fighting helicopter and specialty first aid packet won about lower the emergency care which is appropriate cannot become accomplished are the actual condition in total lack of emergency care equipment. Consequently craving augmentation, in order to be adapted with the handling kind transfer whose specialty and is appropriate and present time of rapid increase and the citizen of emergency demand by fire fighting helicopter simplicity transfer compared to it is a condition where the countermeasure preparation is earnest. Must expand emergency care equipment first even in fire fighting helicopter and 1st EMT's which it follows in him become arrangement and quickly the execution and specialty temporary disposal(ALS) must be enforced a temporary disposal and must buy the life which is. Also it gets by experience a helicopter induction outline, a radio communication method and the patient helicopter on-board hour attention point back various attention fact back with the body and when where it stands but accurately there must be it will be able to induce the helicopter. Also every manuals anger it does a helicopter transfer method and the emergency care method back and that all processes must do fixed form anger, it becomes feed. Also it related with a helicopter transfer even from the relationship agency many research to lead, difference of the advanced foreign nation and the maximum it is the actual condition where the medical emergency system construction which it reduces is earnestly demanded. Also with emergency structure(crane) it confronts to an aviation transfer even from the establishment college and education it leads intensively and 1st EMT's of the good quality which relates with an aviation structure expects is cultivate at all.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.205-206
• /
• 2009

The trouble with small & medium dyeing company is balance and transfer of the chemical by man. And due to manual operation occur various environmental issues, and harmful elements in the human body. And the price of imported equipment (CCK) is very high. To solve these problems, this equipment was developed.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.1
• /
• pp.27-36
• /
• 2002

This paper describes "the remote automatic diagnosis and repair system which automatically reads the problems such as "out of order" occurred on equipment at customer's equipment from a remote computer center using HTTP(hyper text transfer protocol). It shows the scheme of the network configurations and features of the system. In addition, a way to implement the overall system, the specific functions of unit, and the operational specifications between the center's computer and customer's computer are also presented.also presented.