• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.170-175
• /
• 2016

본 논문은 주파수 분할기를 통한 변조신호 전달시스템의 구현에 있어, 동적 주파수분할기의 출력 유지 조건 및 동작 주파수의 관계식을 활용하여 반송주파수가 분할된 변조신호의 전달함수를 도출하였다. 이러한 분석으로부터, 동적 주파수 분할기의 전달함수는 크기 신호에 대하여 곱셈기의 이득과 입력 전압의 일차 선형 함수로 결정되며, 위상은 입력위상에 대역필터의 군지연이 합산되는 관계로 파악되었다. 이에 따라 1,400 MHz 대역에서 동작하는 동적 주파수 분할기를 설계하였으며, 이를 통해 700 MHz 대역으로의 변조신호 전달 가능성을 확인하기 위한 모의실험을 수행하였다. 설계된 회로는 0.9~3.2 GHz에서 동작하며, 2.3 GHz의 대역폭을 가지고 입력 주파수 1.4 GHz에서 -14.5 dBm의 입력 전력으로 동작하도록 설계되었다. 바이어스 전압 $V_{DD}=2.5V$에서 입력 파형 $V_{PP}=136mV$일 때 20 mW의 전력을 소모하며, 변조지수 0.9인 진폭변조신호를 1.4 GHz에서 700 MHz로 성공적으로 전송하는 것을 확인하였다.

• 대한치과보철학회지
• /
• 제60권4호
• /
• pp.431-441
• /
• 2022

디지털 안궁이전 장치로 하악의 운동로를 기록하고 캐드 소프트웨어(CAD software) 상에 반영할 수 있는데 이를 고려한 보철 수복은 치료 결과를 향상시킨다. 본 증례는 상하악 대구치가 소실된 환자에서 디지털 기술을 활용하여 임플란트를 식립 및 보철 수복한 증례이다. 구내 스캔 후 디지털 진단 왁스업을 토대로 임플란트 수술용 가이드를 제작한 뒤 임플란트 식립했다. 6개월의 충분한 골유착 후, 맞춤형 지대주와 첫번째 임시 보철물을 장착하였다. 2개월 후 지대주 수준에서 구강 스캔 및 디지털 안궁이전 장치로 가상 교합기 상마운팅하고 하악 운동을 기록했다. 하악의 움직임을 고려하여 두번째 임시 보철물을 제작, 장착 후 안정된 교합 상태에서 더블 스캔 과정으로 복제하여 지르코니아 최종 보철물을 디자인하고 장착했다.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3454-3459
• /
• 2013

수묵 담채화는 먹과 채색을 동시에 사용하는 예술 양식을 의미한다. 이는 동양 미술의 전통적인 기법중의 하나로 널리 알려져 있으며, 영화 및 광고 포스터 및 카메라의 다양한 특수효과 표현 등에 널리 활용된다. 본 연구에서는 컴퓨터 그래픽스 및 영상처리 기법을 기반으로, 참조된 예제 이미지의 수묵담채화 특징이 반영된 결과영상 생성 알고리즘을 제안한다. 이를 위해 우리는 크게 두 가지 단계를 거친다. 첫 번째 단계는 채색 효과 표현단계이다. 우리는 예제 영상에 나타나는 재질감을 수치적으로 분석해 결과 영상에 반영할 수 있는 질감 전이 기법을 활용하였다. 두번째는 먹선 효과의 표현이다. 우리는 예제영상의 윤곽선에서 나타나는 명도 변화 값을 고려하여 먹선 효과를 표현하였다. 우리의 알고리즘은 선택된 참조 영상에 따라 다양한 느낌의 수묵 담채 스타일의 결과를 표현할 수 있으며, 이 기법은, 다양한 콘텐츠 생성 연구에 활용 가능하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.108-109
• /
• 2012

This talk will begin with the demonstration of facile synthesis of silicon nanostructures using the magnesiothermic reduction on silica nanostructures prepared via self-assembly, which will be followed by the characterization results of their performance for energy storage. This talk will also report the fabrication and characterization of highly porous, stretchable, and conductive polymer nanocomposites embedded with carbon nanotubes (CNTs) for application in flexible lithium-ion batteries. It will be presented that the porous CNT-embedded PDMS nanocomposites are capable of good electrochemical performance with mechanical flexibility, suggesting these nanocomposites could be outstanding anode candidates for use in flexible lithium-ion batteries. Directed self-assembly (DSA) of block copolymers (BCPs) can generate uniform and periodic patterns within guiding templates, and has been one of the promising nanofabrication methodologies for resolving the resolution limit of optical lithography. BCP self-assembly processing is scalable and of low cost, and is well-suited for integration with existing semiconductor manufacturing techniques. This talk will introduce recent research results (of my research group) on the self-assembly of Si-containing block copolymers for the achievement of sub-10 nm resolution, fast pattern generation, transfer-printing capability onto nonplanar substrates, and device applications for nonvolatile memories. An extraordinarily facile nanofabrication approach that enables sub-10 nm resolutions through the synergic combination of nanotransfer printing (nTP) and DSA of block copolymers is also introduced. This simple printing method can be applied on oxides, metals, polymers, and non-planar substrates without pretreatments. This talk will also report the direct formation of ordered memristor nanostructures on metal and graphene electrodes by the self-assembly of Si-containing BCPs. This approach offers a practical pathway to fabricate high-density resistive memory devices without using high-cost lithography and pattern-transfer processes. Finally, this talk will present a novel approach that can relieve the power consumption issue of phase-change memories by incorporating a thin $SiO_x$ layer formed by BCP self-assembly, which locally blocks the contact between a heater electrode and a phase-change material and reduces the phase-change volume. The writing current decreases by 5 times (corresponding to a power reduction of 1/20) as the occupying area fraction of $SiO_x$ nanostructures varies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.74-82
• /
• 2015

전자장치의 복잡도 증가와 전원 전압 감소 추세에 따라, 내부 또는 외부에서 발생되는 노이즈에 대한 칩 또는 모듈의 전자기 내성 평가는 필수적이다. 칩 레벨 EMS 표준 시험방법으로 IEC 62132-4의 Direct Power Injection(DPI) 방법이 있지만, 실제 칩 내성은 모듈 상 보드 PDN 구조에 영향 받는다. 이 논문에서는 PLL의 내성을 평가하고 보드의 PDN 구조에 따른 잡음 전달 특성을 비교하였다. 여러 PDN을 만들기 위해 다양한 값의 커패시터들과 LDO 사용 유무 조건이 적용되었다. IC의 전자기 요구사항과 IC 및 보드로 구성된 모듈의 전자기 요구사항 간 불일치를 평가하기 위해, PDN들에 따른 노이즈 전달 특성을 분석하는 것은 강건한 EM 특성을 갖도록 설계하는데 중요한 정보를 줄 수 있음을 보였다. DPI 측정 결과는 LDO 사용에 따라 PLL 저주파 영역의 내성이 크게 개선되었음을 보여주며, DPI에 따른 PLL의 주파수 변화를 TEM cell 스펙트럼 측정으로도 확인 할 수 있었다.

• 에너지공학
• /
• 제14권4호
• /
• pp.213-218
• /
• 2005

습공기 유동의 착상조건하에서의 열 및 물질 전달 특성을 이해하기 위해서, 미니 열풍동을 제작하고 열풍동의 시험부인 사각덕트 아랫면에 알루미늄 평판을 설치하고 평판의 중심력에 전기냉각모듈(Peltier device)을 부착하였다. 현미경(해상도 0.05mm)을 이용하여 습공기 유동 방향으로 알미늄 평판위의 7개점의 서리 두께를 측정하였으며, 전자저울(해상도 1mg)을 이용하여 각 운전시간대까지의 발생된 서리의 총괄 질량을 측정하였다. 여러 가지의 실험조건에서 서리두께와 서리질량 그리고 알미늄 평판상의 온도 분포 등을 구하고, 이로부터 습공기 유동의 습도 및 속도가 서리의 성장 특성에 미치는 영향을 분석하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.44-51
• /
• 2005

Water flow in rivers during flood season can be 10 to 100 fold higher than normal seasons (low precipitation) in Japan and predicting flood runoff is essential for operating reservoirs with discharging gates. Abundant experiences and knowledge are requisites for operators to be able to make efficient decisions at work. This research investigated a method to transfer technical knowledge by acquiring skills and knowledge from actual dam operators and by using the information to construct an educational training system. The purpose of the research was to enable the execution of a secure and rational reservoir operation during flood period. The educational training system for reservoir operation was developed with the focuses on acquiring knowledge on hydraulics and hydrology and learning about decision making related to the reservoir operation as well as the timing of control. The system is capable of conducting education that corresponds to individual levels in each location. Of the educational training methods, a lecture method that uses textbooks is effective for the understanding of basic knowledge and concepts while a training method that uses a simulation device is essential for the practice of advanced and specialized procedures in specific fields. Simulation devices are used in operational training for airplane flight and driving cars and trains. The educational system presented here was designed to provide further assistance to those who have acquired basic knowledge and concepts through textbooks and also to at low them to perform the satisfactory operation of dam equipment. Our research proposes a method which can realize a system to acquire technical skills-the skills which are the foundation of technical knowledge and operation.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1278-1292
• /
• 2018

Inductive power transfer (IPT) technology allows for charging of electric vehicles with security, convenience and efficiency. However, the IPT system performance is mainly affected by the magnetic coupling structure which is largely determined by the coupling coefficient. In order to get this applied to electric vehicle charging systems, the power pads should be able to transmit stronger power and be able to better sustain various forms of deviations in terms of vertical, horizontal direction and center rotation. Thus, a novel cross-shaped magnetic coupling structure for IPT charging systems is proposed. Then an optimal cross-shaped magnetic coupling structure by 3-D finite-element analysis software is obtained. At marking locations with average parking capacity and no electronic device support, a prototype of a 720*720mm cross-shaped pad is made to transmit 5kW power at a 200mm air gap, providing a $1.54m^2$ full-power free charging zone. Finally, the leakage magnetic flux density is measured. It indicates that the proposed cross-shaped pad can meet the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) according to the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA).

• 대한의용생체공학회:의공학회지
• /
• 제34권3호
• /
• pp.141-147
• /
• 2013

Ultrasonic shears is currently in wide use as an energy device for minimal invasive surgery. There is an advantage of minimizing the carbonization behavior of the tissue due to the vibrational energy transfer system of the transducer by applying a piezoelectric ceramic. However, the vibrational energy transfer system has a pitfall in energy consumption. When the movement of the forceps is interrupted by the tissue, the horn which transfers the vibrational energy of the transducer will be affected. A study was performed to recognize different tissues by measuring the impedance of the transducer of the ultrasonic shears in order to find the factor of energy consumption according to the tissue. In the first stage of the study, the voltage and current of the transducer connecting portion were measured, along with the phase changes. Subsequently, in the second stage, the impedance of the transducer was directly measured. In the final stage, using the handpiece, we grasped the tissue and observed the impedance differences appeared in the transducer To verify the proposed tissue distinguishing method, we used the handpiece to apply a force between 5N and 10N to pork while increasing the value of the impedance of the transducer from 400 ${\Omega}$.. It was found that fat and skin tissue, tendon, liver and protein all have different impedance values of 420 ${\Omega}$, 490 ${\Omega}$, 530 ${\Omega}$, and 580 ${\Omega}$, respectively. Thus, the impedance value can be used to distinguish the type of tissues grasped by the forceps. In the future study, this relationship will be used to improve the energy efficiency of ultrasonic shears.