• Journal of Korea Foundry Society
• /
• v.41 no.1
• /
• pp.16-25
• /
• 2021

The development of technology to prevent environmental pollutants and reduce energy consumption has already become a very significant issue not only for the foundry industry but also for society as a whole. In this paper, we introduce a new dust collector developed for low energy consumption and high performance compared to a roof top dust collector. The roof top dust collector which is using widely in the domestic foundry plant has a low performance about the dust suction ability in spite of high energy consumption because it is installed in a high place to collect the whole dust from all processes in foundry. A dust collector away from dust sources inevitably has low energy efficiency. The development of an efficient collector for foundry is very difficult because the position of the dust source continues to change from the melting process to the pouring process. New dust collector is installed on the ladle transfer equipment such as cranes, hoists, and monorails to effectively respond to moving dust sources. The movable device, attached close to the source of dust, provides high performance even with low energy consumption. The new dust collector is expected to be an environment-friendly device that can be applied to the foundry.

• Journal of agriculture & life science
• /
• v.51 no.1
• /
• pp.187-192
• /
• 2017

In various crops, seedlings are preferred to seeds for faster and more effective growth, so transplanters are used for them. This 2-row transplanter was developed to promote the mechanization of vegetable transplanting work which depends on human power. and it can automatically supply seedling tray and transport picked up seedling to the planting hopper. Also, we judged performance of transplanter with comparing seedling missing plant ration according to two types of pick-up method. Result of experiment, in finger-type picking up of 265 seedlings, missing plant ratio was 13.7% with 17 failures of pick-up and 15 collapse of bed soil. and In fork-type picking up of 200 seedlings, failure of pick-up was not appeared and missing plant ratio was low as 4% with 6 dropped during transfer. Therefore for 2-row automatic transplanter, fork-type pick-up device was found to be compatible.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.145-154
• /
• 2021

While welcoming the distributing of the powers of the Ministry of Education, which is currently being promoted, to the city and provincial offices of education, I am very concerned that this will expand and amplify the powers concentrated in one central institution to 17 local institutions closer to the field. Until now, the Ministry of Education and the Office of Education have served as co-cause providers as important reasons for hindering school education. The transfer of the authority of the Ministry of Education is highly likely to be deformed as soon as it results in the quantitative reduction of the functions and roles of the existing Ministry of Education and the quantitative expansion of the roles and functions of the city and provincial offices of education. In the reality that no legal device for school autonomy has been established, it is highly likely that emphasizing the principle of school autonomy in our educational climate, which is deeply rooted in the vertical bureaucratic administrative culture, will end with a simple measure or stop at the level of imitation. Therefore, a more stable device is needed to check the authority of the city and provincial office of education and the superintendent of education to take over the authority of the Ministry of Education. This is also a system that is still required even when school autonomy becomes legal. Therefore, it is necessary to revitalize the independent education committee, establish a local education committee in the city and province education office, and activate the resident participation system (resident proposal system, resident voting system, resident litigation system, resident audit request system).

• The Journal of KAIRB
• /
• v.5 no.1
• /
• pp.14-20
• /
• 2023

Purpose: To obtain fundamental data on selection tools for an internal audit and develop a new guideline. We scored the indicated points from the internal audit, identified the research progress and problems that occurred, and confirmed the validity of the risk factors involved. Methods: Of the 63 internal audits conducted by Keimyung University Dongsan Hospital from 2014 to 2021, we analyzed 55 clinical trials with an inspection checklist. We excluded 8 that failed to transfer data and refused to comply with the internal audit. The statistical summary of the collected data was verified and interpreted by using frequency analysis and a chi-square test. Result: Of total 55 cases included in the internal audit, sponsor-initiated trial (SIT) was 63.6% (vs. investigator-initiated trial [IIT]), clinical trial for investigational drug was 71.0% (vs. nonclinical or clinical trial for investigational device), domestic multicenter trial was 60.0% (vs. single center or multinational multicenter trial), and trial requisition for MFDS approval was 69.1% (vs. exception for MFDS approval). The 10 areas of the clinical trial inspection checklist (reports, protection of subjects, compliance with protocols, records, management of investigational drug and/or device, delegation of duties, qualification of investigators, management of specimen, contract-agreement and approval of protocols, and preservation of recorded documents) were weighted between 2 to 5 points. The average of the total points was 16.09±13.2 and 20 clinical trials were above the average. As a result of comparing the average of the total points weighted by year, the highest score was in 2020. The 4 factors that play significant roles in determining the internal quality were (1) principal subjects that initiated the clinical trials (p=0.049), (2) type (p=0.003), (3) phase of clinical trials (p=0.024), and (4) number of registered subjects reported at the time of continuing deliberation (p=0.019). Of the 10 areas of the clinical trial inspection checklist, 'record' was the most inappropriate and insufficient. We found more indicated points; the quality of performance declined in IIT, nonclinical trials, and other clinical trials that were not in phase I1-IV4, and the study of more than 30 registered subjects at the time of continuing review. Conclusion: If an institution has an internal audit selection tool that reflects the aforementioned risk factors, it will be possible to effectively manage high-risk studies; thereby, contributing to an efficient internal audit and improving the quality of clinical trials.

• Journal of Embryo Transfer
• /
• v.31 no.1
• /
• pp.47-52
• /
• 2016

The objective of this study was to investigate the result of in vivo embryo collection and pregnancy rate after embryo transfer using sex-sorted sperm of Korean brindle cattle. Donor Korean brindle cattle superovulation treated by decreasing dose of FSH injection. Embryos were recovered on 7 days after the third artificial insemination. Control group semen straw used artificial insemination contained 20 million sperm. Sex-sorted semen straws contained 4 million sperm or 10 million sperm. As for the result of the recovery of the in vivo embryos derived from sex-sorted sperm, the number of transferable embryos was significantly highly recovered to be $6.20{\pm}2.28/donor$ from the control group and was significantly lowly recovered to be $1.57{\pm}1.72/donor$ from the group treated at a sperm concentration of $10{\times}10^6$ (p<0.05). The number of unfertilized embryo was $0.8{\pm}1.30/donor$ in control group which was significantly lower than the group treated at a sperm concentration of $4{\times}10^6$ (p<0.05). However, there was no significant difference in the number of undeveloped ova between control and treatment groups. Pregnancy rate after embryo transfer was shown to be 35.00% in control group and 12.50% in treatment group. The karyotype analysis of the calf derived from sex-sorted sperm resulted in a similar chromosomal distribution pattern (2n=60, XX) compared to those of common Korean native cattle.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.105-113
• /
• 2011

This study was carried out to develop an automatic loading equipment that can load seedling trays on loading position of the seedling bed driving on enclosed-type rail installed for interconnecting each process of raising seedlings in plant factory. The experiment of transferring the seedling tray by monorail pusher was carried out to figure out the required transfer force and problems during push type device of transporting the plastic seedling trays, that has completed its sowing process, which are installed onto the board of different materials. From the results of this experiment, the loading equipment which can exactly load three of the seedling trays orderly on the loading position of the seedling bed was designed and made. When three sowed trays on every board are transferred by pusher with the speed is at 30 cm/s, the maximum peak transfer force with maximum overshooting at initial transient state and the maximum transfer force at stead state are were respectively 32.8 N, 29.4 N on rubber board, 29.7 N, 22.5 N on a wooden board, 26.9 N, 19.6 N on a acrylic board, and 27.6 N, 19.1 N on an iron board. Changes in the transfer force occurred its maximum at the moment when the pusher collided with the tray, after the collision gradually decreased until it became stable. When two or three trays placed it in order of widthwise are transferred, it is occurred the overlapping of the tray's external bracket. The developed automatic loading equipment with PLC controller did not make any operation error through 100 times of tests, its maximum seedling tray loading speed was 2 sec/tray and its maximum error of transferred location of the tray was 0.5 cm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.595-598
• /
• 2008

The Large amounts of data were available to transfer on mobile environment in the development of mobile telecommunications technology. And WIPI(Wireless Internet Protocol for Interoperability) platform is being mounted obligations to develope mobile application services. The applications developed on WIPI platform is possible to interoperability on mobile mounted WIPI platform, so there are not demand on mobile device. Currently e-commerce service is actively on mobile environment. This service is offerd based on XML Signature(eXtensible Markup Language) which provide integrity, message authentication, and/or signer authentication services for data of any type, whether located within the XML that includes the signature or elsewhere. In this paper, we designed and implemented XML Signature service module which possible interoperability on mobile mounted WIPI platform.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.933-936
• /
• 2008

Mobile devices such as cellular phones and PDA become a part of our life by extreme improvement of Wireless internet and arriving the age of Ubiquitous. Especially it makes increasing rapidly the expectations about a field of remote control that is great advantage of Mobile devices. Existing computer remote control systems are hard to meet user's appropriate manage when error happened because Clients could not recognize the state of several remote controlled computers which connected to web server. This paper Implementation remote computer control system that immediately after errors happen by send error massages in the from of a SMS to client by set the clients with cellular phone that most generally used Mobile devices.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.2
• /
• pp.1011-1019
• /
• 1996

The incidence of spinal cord injury increase due to traffic accident, industrial accident and leisure sports. Spinal cord injury damages motor and sensory function below the injury level, also affects autonomic functions associated with voiding and defecation. Sexual dysfunction and psychosocial, vocational maladaptations are also some of the unwanted consequences of injury. The purpose of this study is look for means to prevent and to manage complications in spinal cord injury through investigation and analysis. The subjects of this study in spinal cord injured patients were admitted to the department of physical therapy, Kwangju christian Hospital, Nam Kwang Hospital, Chun Nam university Hospital and Cho Sun university Hospital, from April, 1, 1995 to March, 31, 1996. The results are as follows: 1. The subjects comprised 96 cases of spinal cord injury, ranging from 17 to 85(mean-40.8 yrs) and included 72 males and 24 females. Among these patients, 58 were cervical injury, 20 were thoracic injury and 18 were lumbar injury. 2. As for a major causative of spinal cord injury were traffic accident(59.4%), fall down (27.1 %), and motocycle(4.2%).. 3. The bladder control were taken by indwelling cathetar(41.7%), Crede maneuver(37.5%) and self voiding(16.7%). The bowel control were taken by all aid(61.5%), assitance(32.3%) and self defecation(6.2%). 4. Possible of sexual function were 35 cases (47.9%). 5. The device of transfer used wheel chair(69.8%) and bed(16.7%). 6. The patients with higher cord lesion got more serious pain than lower cord lesion. Also the patients with higher cord lesion got a serious spasticity. 7. The incidence of decubitus ulcer among 96 patients were in case 46(47.9%). The largest group of the pressure sore sites were sacral portion(82.0%), less than 1 month of onset occured a large numbers(50%). Incidence of pressure sore by spasticity occured many patients in case of mild or moderate. Incidence of pressure sore by pain occured many patients in case of severe pain.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.575-584
• /
• 2003

Due to hardware resource limit and system incompatibility of the mobile device, and low bandwidth of wireless communication, there are a few difficulties in introducing the digital contract system based on wired communication to M-Commerce. To get over the difficulties, this paper defines a digital contract based upon XML and then addresses the design and implementation of M-XContract, a digital contract system for the mobile environment. M-XContract system has been constructed with the digital contract server, M-ESign module which contracts with the customer on the PDA and transfers the contract digitally signed to the server, M-EDecoder module which shows the contract to the customer from the server, and X-Auth which is a contract authoring tool. To evaluate the run-time performance of the M-XContract, we measured the digital signature generation time and transfer time to the server. The evaluation results show that the M-Xcontract is an efficient model for the mobile contract system.