• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.

• IMMUNE NETWORK
• /
• v.23 no.6
• /
• pp.45.1-45.22
• /
• 2023

Interstitial lung disease (ILD) involves persistent inflammation and fibrosis, leading to respiratory failure and even death. Adult tissue-derived mesenchymal stem cells (MSCs) show potential in ILD therapeutics but obtaining an adequate quantity of cells for drug application is difficult. Daewoong Pharmaceutical's MSCs (DW-MSCs) derived from embryonic stem cells sustain a high proliferative capacity following long-term culture and expansion. The aim of this study was to investigate the therapeutic potential of DW-MSCs in experimental mouse models of ILD. DW-MSCs were expanded up to 12 passages for in vivo application in bleomycin-induced pulmonary fibrosis and collagen-induced connective tissue disease-ILD mouse models. We assessed lung inflammation and fibrosis, lung tissue immune cells, fibrosis-related gene/protein expression, apoptosis and mitochondrial function of alveolar epithelial cells, and mitochondrial transfer ability. Intravenous administration of DWMSCs consistently improved lung fibrosis and reduced inflammatory and fibrotic markers expression in both models across various disease stages. The therapeutic effect of DW-MSCs was comparable to that following daily oral administration of nintedanib or pirfenidone. Mechanistically, DW-MSCs exhibited immunomodulatory effects by reducing the number of B cells during the early phase and increasing the ratio of Tregs to Th17 cells during the late phase of bleomycin-induced pulmonary fibrosis. Furthermore, DW-MSCs exhibited anti-apoptotic effects, increased cell viability, and improved mitochondrial respiration in alveolar epithelial cells by transferring their mitochondria to alveolar epithelial cells. Our findings indicate the strong potential of DW-MSCs in the treatment of ILD owing to their high efficacy and immunomodulatory and anti-apoptotic effects.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.169-189
• /
• 2024

In the current work, a series of three-dimensional finite element analyses have been carried out to understand the behaviour of pre-existing single piles and pile groups to adjacent Shield TBM tunnelling by considering various reinforcement conditions. The numerical modelling has analysed the effect of the pile cutting, ground reinforcement and pile cap reinforcement. The analyses concentrate on the ground settlements, the pile head settlements, the axial pile forces and the shear stress transfer mechanism at the pile-soil interface. In all cases of the pile tips supported by weathered rock, the distributions of shear stresses presented a similar trend. Also, when the pile tips were cut, tensile forces or compressive forces were induced on the piles depending on the relative positions of the piles. Furthermore, when the pile tips are supported by weathered rock, approximately 70% of the load is supported by surface friction, and only the remaining 30% is supported by the pile tip. Furthermore the final settlement of the piles without reinforcement showed approximately 70% more settlement than the piles for which ground reinforcement is considered. It has been found that the ground settlements and the pile settlements are heavily affected by the pile cutting and reinforcement conditions. The behaviour of the single pile and group piles, depending on the pile cutting, conditions of ground and pile cap reinforcement, has been extensively examined and analysed by considering the key features in great details.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.226-237
• /
• 2005

Purpose : Extensive defect of oral and maxillofacial area is usually reconstructed with composite flap including skin paddle. However, if the defects are lined with only skin components, the mucosa's role in mastication and texture are not restored. Furthermore, stiffness and hair-growing prevent denture rehabilitation and good oral hygiene. This study was performed to overcome the disadvantages of composite soft tissue flaps including the skin and to make a model for myo-mucosal flaps. Materials and methods : Buccal mucosa sized $0.5\times1.0\;cm^2$ from New Zealand rabbit (around 1.5kg) was harvested and cultivated by the modification of Rheinwald and Green's keratinocyte culture method. Cultured mucosa was grafted on the fascia of latismus dorsi as form of mucosal sheet. After 7, 10, 14 days, the myomucosal flap was excised and evaluated under light microscope with H & E and immunohistochemical staining. As control group, harvested buccal mucosa from rabbit was transplanted to gracilis muscle(n=6). Results : From 7 days after prelamination, the basal layer of the grafted mucosa resembled that of normal mucosa. As control group, transplanted mucosa had original shape but there's slight inflammatory reaction. Prelaminated mucosa has 19.8$\pm$4.59 cell layers and some samples have more than 20 layers. The expression rate of PCNA was relatively strong (42.9%$\pm$14.1) at the basal layer of grafted mucosa and the laminin was found at the basal layer. On the contrary, prelaminated mucosa at 10 days showed moderate expression rate of PCNA(32.4%$\pm$4.62). We found the mucosal layer was somehow disappeared and there is strong inflammatory reaction. After 14 days prelamination, the grafted oral keratinocytes were almost disappeared and expression of PCNA was not observed. Conclusion : We can make 75 fold large mucosal($3850mm^2$) sheet from small samples of mucosa $(50mm^2)$. Epithelial sheet that grafted on the fascia of muscle underwent differentiation and proliferation. But after 10, 14 days, there was strong inflammatory reaction and the grafted mucosa was destroyed from surface layer. In rabbit model, transfer of fascio-mucosal flap should be done from 7 to 10 days after prelamination.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.3
• /
• pp.272-277
• /
• 2001

Objective : Polymethylmethacrylate(PMMA) is often used to reconstruct the spine after total corpectomy, but the exothermic curing of liquid PMMA poses a risk of thermal injury to the spinal cord. The purposes of this study are to analyze the heat blocking effect of pre-polymerized PMMA sheet in the corpectomy model and to establish the minimal thickness of PMMA sheet to protect the spinal cord from the thermal injury during PMMA cementation of vertebral body. Materials & Methods : An experimental fixture was fabricated with dimensions similar to those of a T12 corpectomy defect. Sixty milliliters of liquid PMMA were poured into the fixture, and temperature recordings were obtained at the center of the curing PMMA mass and on the undersurface(representing the spinal cord surface) of a prepolymerized PMMA sheet of variable thickness(group 1 : 0mm, group 2 : 5mm, or group 3 : 8mm). Six replicates were tested for each barrier thickness group. Results : Consistent temperatures($106.8{\pm}3.9^{\circ}C$) at center of the curing PMMA mass in eighteen experiments confirmed the reproducibility of the experimental fixture. Peak temperatures on the spinal cord surface were $47.3^{\circ}C$ in group 2, and $43.3^{\circ}C$ in group 3, compared with $60.0^{\circ}C$ in group 1(p<0.00005). So pre-polymerized PMMA provided statistically significant protection from heat transfer. The difference of peak temperature between theoretical and experimental value was less than 1%, while the predicted time was within 35% of experimental values. The data from the theoretical model indicate that a 10mm barrier of PMMA should protect the spinal cord from temperatures greater than $39^{\circ}C$(the threshold for thermal injury in the spinal cord). Conclusion : These results suggest that pre-polymerized PMMA sheet of 10mm thickness may protect the spinal cord from the thermal injury during PMMA reconstruction of vertebral body.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.82-88
• /
• 2014

Purpose: The purpose of study was to evaluate radiation dose for pediatric patients by changing tube voltage (kVp) and tube current (mA) at minimum conditions. By evaluating radiation dose, we want to provide dose reduction for pediatric patients and maintain good quality of SPECT/CT images. Materials and Methods: Discovery NM/CT 670 Scanne was used as SPECT/CT. Tube voltages are 80 and 100 kvP. Tube currents are 10, 15, 20, 25 mA. Using PMMA (Polymethyl methacrylate) Phantom, radiation dose which were calculated at center and peripheral dose and SNRD (Signal to Noise Ratio Dose) were evaluated. Using the CT performance phantom, spatial resolution was evaluated as the MTF (Modulation Transfer Function) graph. Jaszczak phantom was used for SPECT image evaluation by CNR (Contrast to Noise to Ratio). Results: Radiation dose using the PMMA phantom was higher peripheral dose than center dose about 7%. SNRD were 7.8, 8.2, 8.3, 8.8, 8.8, 9.9, 9.8, 9.6 for 80 kVp 10, 15, 20, 25 mA, 100 kVp 10, 15, 20, 25 mA. We can distinguish 35, 45, 70, 71, 52, 58, 90, 110 linepair for 80 kVp 10, 15, 20, 25 mA, 100 kVp 10, 15, 20, 25 mA at resolution with MTF. CNR of SPECT images using CT attenuation map were 57.8, 57.7, 57.1, 56.7, 56.6, 56.7, 56.7, 56.7% for 80 kVp 10, 15, 20, 25 mA, 100 kVp 10, 15, 20, 25 mA. Conclusion: In this study, radiation dose for pediatric patients showed decreased low dose condition. And SNRD value was similar in all condition. Resolution showed higher value at 100kVp than 80kVp. for CNR, there was no significant difference. we should take additional study to prove better quality and dose reduction.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.41-51
• /
• 2014

Cauliflower mushroom widely known high concent of ${\beta}$-glucan for farm cultivation invigoration verified characteristics of mycelia growth, genetic diversity, resistance to Trichoderma by replacement culture with Trichoderma and growth characteristics of new variety crossbleeding strain. The result of replacement culture with Trichoderma for verification resistance about Trichoderma, 6951 (T. viride) strain did not show special change after formation of confrontation line and 6952 (T. spp.) strain was showed more formation of spore after formation of confrontation line. But 6426 (T. harzianum) strain found to encroach part of growth area of cauliflower mushroom mycelia. Among 10 kinds cauliflower mushroom strain, JF02-06 strain collected by Gurye, found did not spore of Trichoderma and thought to be resistant to Trichoderma. The result of crossbleeding after selected that mother strain good growth and formation of fruit body, verified good mycelia growth at JF02-47, 49 and 50 strain in Korean pine of wood-chip media. The result of gene sequence about ITS1, 5.8S and ITS4 for analysis of genetic diversity at crossbleeding strain, found high significance to other cauliflower mushroom in registered Genebank. The result of growth characteristic of spore and mycelia of cauliflower mushroom by observation microscope, size of spore showed water drop shape to major axis $6{\mu}m$ and minor axis $5{\mu}m$ and clamp showed 3 types in mycelia. The wide of mycelia was $3{\mu}m$. The characteristic of mycelia of cauliflower mushroom found to grow mycelia in clamp at approximately 50%. The growth speed of mycelia was $0.507{\mu}m/min$ and 2nd mycelia grown similar speed to mother mycelia at parallel with mother mycelia after growth speed at $0.082{\mu}m/min$. The formation of clamp made small clamp for 5 hours after shown transfer of electrolyte in mycelia inside. The septum formation started after 3 hours and then finally completed after 2 hours. In this study, strain of cauliflower mushroom verified resistance of Trichoderma, genetic diversity and characteristic of mycelia growth. Therefore, basic knowledge of cauliflower mushroom will improve and further contribute to development of mushroom industry.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.630-637
• /
• 1998

Enzymatic properties of immobilized transglucosidase (TG) from Aspergillus niger was characterized and compared with soluble TG. Michaelis-Menten constant $(K_m)$ and maximum velocity $(V_{max})$ of immobilized TG were $122\;mM,\;3.9{\times}10^{-2}\;mM/min$ and in case of soluble TG, 21 mM, 0.4 mM/min. The optimum pH of immobilized TG was pH 5.0 like soluble TG but immobilized TG showed 16% and 45% higher activity than soluble TG at pH 5.0 and pH 6.0. Both of immobilized TG and soluble TG were stable from pH 2.0 to pH 9.0, and therefore their activities in these pH ranges were remained more than 90%. The temperature was optimal at $60{\sim}70^{\circ}C\;and\;70{\sim}80^{\circ}C$ for soluble TG and immobilized TG, respectively. The thermal stability of immobilized TG was significantly improved than that of soluble TG, and immobilized TG retained $32{\sim}40%$ higher activity than soluble TG. D-values from thermal inactivation of immobilized TG were 7690 sec at $65^{\circ}C$, 83 sec at $75^{\circ}C$, 7.2 sec at $80^{\circ}C$. Z-values of soluble and immobilized TG were $6.4^{\circ}C\;and\;5.3^{\circ}C$, respectively. The little difference of activation energies of soluble TG and immobilized TG supposed that there was little difference in mass transfer limitation during the reaction of soluble TG and immobilized TG.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.278-286
• /
• 2021

In this study, based on the Computational Fluid Dynamics (CFD) simulation model developed through previous study, inner environmenct of the modified glass greenhouse was predicted. Also, suggested the optimal shape of the greenhouse and location of the heat exchangers for heat energy management of the greenhouse using the developed model. For efficient heating energy management, the glass greenhouse was modified by changing the cross-section design and the location of the heat exchanger. The optimal cross-section design was selected based on the cross-section design standard of Republic of Korea's glass greenhouse, and the Fan Coil Unit(FCU) and the radiating pipe were re-positioned based on "Standard of greenhouse environment design" to enhance energy saving efficiency. The simulation analysis was performed to predict the inner temperature distribution and heat transfer with the modified greenhouse structure using the developed inner environment prediction model. As a result of simulation, the mean temperature and uniformity of the modified greenhouse were 0.65℃, 0.75%p higher than those of the control greenhouse, respectively. Also, the maximum deviation decreased by an average of 0.25℃. And the mean age of air was 18 sec. lower than that of the control greenhouse. It was confirmed that efficient heating energy management was possible in the modified greenhouse, when considered the temperature uniformity and the ventilation performance.

• The Korean Journal of Archival Studies
• /
• no.5
• /
• pp.39-85
• /
• 2002

This paper is aimed at proposing the policies for managing archives in the process of promoting Electronic Government System. Although there have been many studies of electronic government project and plans for its establishment, this research examines the electronic government system and its problems on the basis of archival science. What I acquired in this paper is as follows. The development of information technology needs great changes ranging from the nation to the individuals. It becomes common that the use of computerized program for business purposes, computerization of information materials and the effective way of search use of electronic documents. Therefore, more and more countries all over the world have been seeking to promote 'Electronic Government', which applies the fruits of the development in information technology to administration process. Recently, Korea has been rapidly entered into the 'Electronic Government' system being against the traditional way of administration. In electronic government system, the 'Life Cycle' of public records will be computerized. Therefore, it is important to change and develop along with the government's policies for 'electronic government project' in the archival management system. This means that the archival management system which have put emphasis on the textual records should be converted to electronic records system. In other words, the records management in electronic government system requires not the transfer and preservation of the records but the consistent management system including the whole process of creating, appraising, arranging, preserving and using the records. So, the systematic management of electronic records plays an important role in realization of electronic government, but it is a subject to be realized by electronic government at the same time. However, the government have overlooked the importance of archival management for long time, especially the importance of electronic records management system. First of all, this research attempts to infer limits and problems through the theoretical considerations of the existing studies for electronic government and to clear up the relations between electronic government and archival management. Based on this, I'll seek to progress the study through reviewing the present condition of archival management in the process of promoting electronic government and suggesting the policies for enhancing the successful electronic government and the construction of scientific archival management system. Since early 1990, many countries in the world have been making every effort to concrete 'Electronic Government'. Using the examples in other nations, it is not difficult to recognize that the embodiment of electronic government is closely connected with the archival management policies. Korea have completed legal and institutional equipments including the new establishment of "Electronic Government Law" to realize electronic government. Also, Korea has been promoting electronic government with the Ministry of Government Administration and Home Affairs and Government Computer Center as a leaders. Though managing records, especially the management of electronic records is essential in electronic government system, we haven't yet discussed this section in Korea. This is disapproved by the fact the Government Archives and Records Service has played little role in promoting electronic government project. There are two problems relating this environment. First, present system can't meet the consistent 'Life Cycle' ranging from the creation to the preservation of electronic records. Second, the 'Life Cycle' of electronic records is divided into two parts and managed separately by GCC and GARS. The life of records is not end with the process raged from creation to distribution. On the other hand, the records are approved their value only whole procedures. Therefore, GARS should play a deading role in designing and establishing the archival management system. The answer to these problems, is as follows. First, we have to complete the electronic records management system through introducing ERMS not EDMS. This means that we should not change and develop towards ERMS simply with supplementing the current electronic records management system. I confirm that it is important and proper to establish ERMS system from the very beginning of the process of promoting electronic government. Second, I suggest the developmental integration of GARS and GCC. At present, the divided operations of GCC and GARS, the former is in charge of the management center for electronic business and the latter is the hub institution of managing nation's records and archives result in many obstacles in establishing electronic government system and accomplishing the duties of systematic archival management. Therefore, I conclude that the expansive movement towards 'National Archives' through the integration among the related agencies will make a great contribution to the realization of electronic government and the establishment of archival management system. In addition to this, it will be of much help to constitute and operate the 'Task Force' regarding the management of electronic records with the two institution as the central figures.