• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.1
• /
• pp.19-25
• /
• 2012

The efficiency and life time of the Proton Exchange Membrane fuel cell (PEMFC) system is critically affected by incoming gas with humidity which should be maintained properly at normal operating conditions. Typically, incoming gas of automotive fuel cell is humidified by external humidifier but the characteristics of device is rarely reported. In this study, characteristics of water transfer in the membrane humidifiers have been experimentally investigated for flow rates of gas and for different flow arrangement under steady state condition. At first, capability of mass transfer through the membrane is examined at constant temperature. Then, the temperature distribution effect on the capability of mass transfer is tested over various inlet conditions. In summary, this research presents the mass transfer capability of hydrophilic membrane over various operating conditions.

• International Commerce and Information Review
• /
• v.10 no.2
• /
• pp.141-164
• /
• 2008

This study aims to come up with the elements that have influence on the outcomes of technology transfer in a multi-divisional way by making analysis of the interactive relations among technology transfer factor, technology transfer procedure factors, and technology transfer outcome factors through the Structural Equation Model(SEM). And the sample companies are restricted to the ones that have the records of technology transfer to China for the past five years For research model, technology success factor model of Choi and Lee (2000) and technology receptive capability and technology transfer outcome model of Lin, Tan and Chang(2002) were adopted. The research model was divided into an external variable, technology transfer factors and an internal variables, technology transfer procedure factors and technology transfer outcome factors. Research hypothesis was divided into technology transfer factors and technology transfer procedure factors; and technology transfer outcomes. As a result of analysis, cultural difference associated with technology transfer, technological type, corporate capability, and mutual trust have an effect on the outcomes of technology transfer.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.12
• /
• pp.586-591
• /
• 2005

This paper presents a method of minimizing of generation cost on individual electrical power utility. The method is based on the Economic Dispatch (ED) and linear Available Transfer Capability (ATC). The economic dispatch redistributes the total load to individual units to minimize the generation cost without transmission network constraints. The proposed method is implemented using ATC calculated from Power Transfer Distribution Factor (PTDF) for the transmission network constraints. The performance of the proposed method has been tested for the IEEE-30 bus system. It has also been observed that the results of the proposed method is compared with that of optimal power flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.2
• /
• pp.117-124
• /
• 2008

Recent researches on nanofluids have mainly focused on the increase of thermal conductivity of nanofluids under static condition. The ultimate goal of using nanofluids, however, is to enhance the heat transfer performance under fluid flow. So it has been highly necessary to devise a simple and accurate measuring apparatus which effectively compares the heat transfer capability between the base and nanofluids. Though the convective heat transfer coefficient is not the complete index for the heat transfer capability, it might be one of useful indications of heat transfer enhancement. In this article, the working principles of experimental system for convective heat transfer coefficient around a heated fine wire in cross flow of nanofluids and its application example to three samples of nano lubrication oils are explained in detail.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.1
• /
• pp.14-24
• /
• 2011

In order to facilitate the electricity market operation and trade in the restructured environment, ample transmission capability should be provided to satisfy the demand of increasing power transactions. The conflict of this requirement and the restrictions on the transmission expansion in the restructured electricity market has motivated the development of methodologies to enhance the available transfer capability (ATC) of existing transmission grids. The insertion of flexible AC transmission System (FACTS) devices in electrical systems seems to be a promising strategy to enhance single area ATC and multi-area ATC. In this paper, the viability and technical merits of boosting single area ATC and multi-area ATC using Thyristor controlled series compensator (TCSC), static VAR compensator (SVC) and unified power flow controller (UPFC) in single device and multi-type three similar and different device combinations are analyzed. Particle swarm optimization (PSO) algorithm is employed to obtain the optimal settings of FACTS devices. The installation cost is also calculated. The study has been carried out on IEEE 30 bus and IEEE 118 bus systems for the selected bilateral, multilateral and area wise transactions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.94-99
• /
• 2005

This paper presents a method to assess total transfer capability(TTC) considering transient stability. TTC is limited not only by the violation of system voltage and thermal limits, but also restricted by transient stability limit, TTC calculation is divided into two processes. The frist step is to calculate TTC without considering the transient stability constraint by using repeated power flow(RPF) method. The second step is to perform transient stability analysis based on TTC calculation in the frist step.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.303-308
• /
• 2005

The restructure of the electrical power industry is accompanied by the extension of the electrical power exchange. One of the key pieces of information used to determine how much power can be transferred through the network is known as available transfer capability (ATC). The traditional ATC deterministic approach is based on the severest case and it involves a complex procedure. Therefore, a novel approach for A TC calculation is proposed using cost optimization in this paper. The Jeju Island interconnected HVDC system has inland KEPCO (Korean Electric Power Corporation) systems, and its demand is increasing at the rate of about $\10[%]$ annually. To supply this increasing demand, the capability of the HVDC system must be enlarged. This paper proposes the optimal transfer capability of the HVDC system between Haenam in the inland and Jeju in Cheju Island through cost optimization. The cost optimization is based on generating cost in Jeju Island, transfer cost through Jeju-Haenam HVDC system and outage cost with one depth (N-1 contingency).

• Asia pacific journal of information systems
• /
• v.15 no.3
• /
• pp.9-39
• /
• 2005

Recently, knowledge transfer has been recognized as one of the major factors for success of IT projects but little investigated in Information Systems research. IT project, which needs collaboration between organization's IT project team and external partner, is an critical source for a firm to acquire external knowledge and to achieve its competitive advantage. Based on this recognition on knowledge transfer under IT project, we investigate a mediation role of knowledge transfer to IT project performance after identifying its antecedents such as project team capabilities and partner capabilities. The research model is tested by analyzing 161 sample data gathered from firms' employees who have participated IT projects within last two years. The results reveal that knowledge transfer has full-mediation effect between its antecedents and IT project performance. Moreover, project team capabilities have more impacts on knowledge transfer than partner capabilities do.

• Asia-Pacific Journal of Business
• /
• v.10 no.3
• /
• pp.53-67
• /
• 2019

Reverse knowledge transfer has been an important research theme in the literature on multinational corporations (MNCs). This paper proposes major determinants of MNC headquarters' willingness to adopt and use marketing knowledge from their subsidiaries. We argue that the willingness will be jointly determined by both the headquarter's absorptive capacity and the focal subsidiary's transfer capacity and willingness to transfer. In addition, we argue that these capability and motivation effects are moderated by (1) institutional distance between home and the focal host country, (2) the need to unlearn existing routines, and (3) types of entry modes. This paper contributes to the reverse knowledge transfer literature by proposing the argument that both motivational and capability factors are likely to determine the MNC parents' willingness to adopt and use marketing knowledge from their subsidiaries.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.1-19
• /
• 2014

The purpose of this research is to analyze the performance of technology transfer of university and professors' capability based on their research activities and performance. For this study, paper citation index, patenting activities, R&D funding scales from public and private sectors separately, careers before and after being professor, scale of research team of 80 professors, who had experienced in technology transfer, were collected. Major result of this research shows that patenting activities rather than paper publishing, R&D funding from private sectors rather than public sectors, and careers after being professor rather than before, are significant factors to affect the performance of university's technology transfer.