• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.509-511
• /
• 1989

In this paper the operation of a N2 laser using corona-preionization and capacitor transfer type excitation circuit is discussed. The laser tube is 24 cm in length and the distance between the electrodes is 1.5 cm. The charging voltage was kept constant 10 KV. This laser can be operated with a range of repetition rate 1 $\sim$ 30 Hz.

• Journal of the Optical Society of Korea
• /
• 제10권1호
• /
• pp.11-15
• /
• 2006

We have proposed and theoretically verified an optical regenerator using a single semi-reflective semiconductor optical amplifier (SR-SOA). To explain the operation characteristics and the operation condition of the proposed opticalregenerator, the simplified gain model for the SR-SOA is introduced and confirmed by comparing the result of the SOA simulation based on the transfer matrix method (TMM). The simulation results show that both extinction ratio (ER) enhancement and signal amplification can be achieved in the proposed regenerator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.320-325
• /
• 2002

The rail reform in Korea is to separate passenger transportation from freight transportation as a way to vitalize rail freight. The author review the problems rail freight faces, the aims of rail reform, the possibility to introduce competition into the rail freight operation, foreign cases of rail freight and make suggestions about the vitalization of rail freight transportation such as industry structure possible for door-to-door service and low cost operation, freight transportation policy of government, capacity expansion, preparedness for internationalization, mechanism for increasing transparency between users and operators and transfer to commerciality of the carrier.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.297-306
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined within some degree of Journal misalignment. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of Journal bearing at high speed operation.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.20-20
• /
• 2011

The purpose of this research aims to evaluate the emergence of new business mode in the Chinese water market since the mid-2000s - Transfer-Operate-Transfer(TOT) Projects. The study pays special attention to the case of the Hefei Wangxiaoying Wastewater Treatment TOT Project, which was awarded to the consortium of Berlin Water International and its Chinese partner in late 2004. The consortium secured an exclusive operating right for 23 years on the basis of a TOT scheme and would take responsibility of all the profits and losses in the operation of the plant. The total investment for the transfer amounted to RMB 491 million(US$70 million). The price was more than 288% of the original value, RMB 170 million (US$24 million). The project can be regarded as a successful case because of the following three causes. First, the Hefei government followed a series of standardized procedures in the international bidding, which ignited best-performed international players' competition for the project. Second, the project will bring in cutting-edge operation skills and management know-how. Third, the government succeeded in raising public asset values, and thanks to this, the government is able to consider other similar projects not only in the water sector but also other sectors in public utility services. Nevertheless, Berlin Water's point of view, there are several challenges. First, the company took a risk to pay such a large amount of cash to the Hefei government. Although such premium can be recouped in the operation period of 23 years, whether or not the company would be able to recover the initial investment and realize profits is in question due to an uncertainty of socio-political circumstances in China. Second, Berlin Water should expect a steep rise of water tariffs over the contract period in order to get the investment back. Water pricing is still a sensible matter to Chinese authorities, and therefore, it is uncertain if such rise of water tariffs would be possible. Third, the TOT mode leads to creation of a large amount of cash to government officials, which might have caused corruption between those who are involved in TOT deals. Then, the final contract fee would soar, which often results in the burden of normal customers. As discussed, the TOT mode has drawn much attention of foreign investors as a new alternative to enter into the Chinese water market. But it is important to note that foreign investors should be aware of possible risks in water TOT projects, which reflects some features of the Chinese political economy landscape and social norms. The Hefei case indicates that benefits can overshadow risks in TOT projects, which will continue to attract foreign investors that are dedicated to establishing their strongholds in the Chinese water market.

• Archives of Reconstructive Microsurgery
• /
• 제10권2호
• /
• pp.75-80
• /
• 2001

Purpose : We have evaluated the morbidity of donor site after transfer of free fibular osseous and osteocutaneous flap to defect site of bone and soft tissue due to chronic osteomyelitis of long tubular bone, open fracture with bony defect, bone or soft tissue tumor and congenital anomaly. Materials and methods : The 54 cases of 79 cases to be carried out from May, 1982 to May, 2001 which could be followed up were reviewed. There were forty nine in male and five in female. The mean age was 35(4 to 66)years old and mean follow up period is 21.3 month(12 to 72). We have retrospectively analyzed the various postoperative complications such as compartment syndrome, donor site infection, skin defect, hypesthesia, hammer toes, ankle instability and activity of daily living by help of questionnaire, telephone, physical examination, follow up x-ray study and chart. Results : In the total 54 cases the medication period for pain control after operation were classified into three groups under 2 weeks(49 cases), from 2 weeks to 6 weeks(3 cases) and over 6 weeks(2 cases). The postoperative morbidity were occurred in total 12 cases(compartment syndrome: 0, infection : 2, skin defect: 1, hypesthesia: 5, hammer toe: 2 ankle pain: 2 discomfort in activity of daily living: 0), and also the morbidity rates of donor site were 23.5% in osseous flap and 21.6% in osteocutaneous flap were occurred. There was no statistical significonce in morbidity between osseous and osteocutaneous free fibular flap transfer(P>0.05). Discussion : In general the morbidity of free fibular flap transfer was relatively high but it did not have any effect on daily activity of living. We think that the meticulous operation technique, detailed wound care and early range of motion exercise will reduce the morbidity of donor site of flap.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.325-335
• /
• 1992

In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1465-1468
• /
• 1996

In this paper, we suggest tele operation system of reclaimers and some side technologies for performing easy operation. The reclaimers in the raw ore yard are being used to dig ironstone and transfer it to the blast furnaces. The side technologies are to determine the minimum stacking distance between piles, collision avoidance of reclaimers and stackers. For simplicity, the pile and the boom of the reclaimer are mathematically modeled as a cone and a line in the 3-dimensional space respectively. The minimum stacking distance is obtained using the condition that the cone and the line never met. The modeling errors for the pile and reclaimers are compensated by considering the width of their reclaimer. We have also proposed a 2-stage collision detection method for the moving machines. The reclaiming heights of the pile are set to predetermined ones to make tele-operation easy.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.91-104
• /
• 1998

This paper describes the simulation study which evaluates operation plans of container terminal. The operation plans of container terminal consist of berth plan, load plan, unload plan, yard plan, and equipment plan. It is discussed how to apply the simulation method to evaluate those plans that are interrelated with each other. This paper also deals with the assignment and coordination problems of container-handing equipment such as container cranes, transfer cranes, yard tractors, and trailers used in the transportation of containers. Simulation analysis is bases on data about plans from the operation planning system through an interface program. It is discussed what we should got the statistics about container-handing equipment in the simulation.

• Industrial Engineering and Management Systems
• /
• 제14권2호
• /
• pp.175-182
• /
• 2015

The recent manufacturing industry in Japan has found it difficult to transfer skills from trained workers to inexperienced workers because the former ages and then retires. This is a particular problem for lathe process, as this operation requires explicit and tacit knowledge, and defining the skills clearly in a manual is difficult. This study aims to develop a training system for lathe operation by using a simulator; this includes formulas that help define the relationship between the speed of tool feed and cutting sound/shape of chips which were proposed in the preceding study. The developed training system is verified the effectiveness.