• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.5-9
• /
• 2013

Recently, eco-friendly sources of energy by fuel cells that use hydrogen as an energy source has emerged as the next generation of energy to solve the problem of environmental issues and exhaustion of energy. A solid oxide fuel cell(SOFC) classified based on the type of ion transfer mediator electrolyte has actively being researched. However, the reliability according to the thermal cycle is low during the operation of the fuel cell, and deformation problem comes from the difference in thermal expansion coefficient between the electrode material, the components made of ceramic material is also brittle, which means disadvantages in terms of the strength. Therefore, in this study, considering the states of the manufacturing and operating of SOFC single cells, the stress analyses in the each of the interfacial layer between the anode, electrolyte and the cathode were performed to get the basic data for reliability assessment of SOFC. The obtained results show that von Mises stress according to the thickness direction on operating state occurred maximum stress value in the electrolyte layer. And also the stresses inside the active area on a distance of 1 ${\mu}m$ from the electrode interface were estimated. Futhermore the evaluation was done for the variation of the stress according to the stage of the operation divided into three stages of manufacturing, stack, and operating.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.536-540
• /
• 2006

Purpose: The soft tissue injuries of the patellar area are difficult problems because of insufficient arterial blood supply and lack of muscle layer. There have been many methods for reconstructing the soft tissue injuries of the patellar area such as primary closure, skin graft, local flap and free tissue transfer. However, each method has some limitations in their application. After the first introduction, the fasciocutaneous flaps are widely used to reconstruct the soft tissue injuries. The saphenous nerve, one of the superficial sensory nerves in the lower leg, is supplied by the saphenous artery and its vascular network. We used the saphenous fasciocutaneous island flap to reconstruct the soft tissue injuries of the patellar area. Methods: From March 2002 to May 2005, we used the saphenous fasciocutaneous island flap to reconstruct the soft tissue injuries of the patellar area. The flap was elevated with saphenous nerve, saphenous vein and saphenous artery and its vascular network. The flap donor site was reconstructed with primary closure or split-thickness skin graft. Results: Five cases survived completely but 1 case developed partial necrosis of the skin on the upper margin of the flap. However, the necrosis was localized on skin layer, and we reconstructed with debridement and split-thickness skin graft only. After the operation, there was no contracture or gait disturbance in any patient. Conclusion: In conclusion, the saphenous fasciocutaneous island flap is safe, comfortable and effective method to reconstruct the soft tissue injuries of the patellar area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2016

As the need of eco-friendly transportation systems for sustainable development increases, public transport accessibility has been considered as an important element of transportation system design. When analyzing the accessibility, shortest path algorithms can be utilized to reflect the actual movement and we can obtain high resolution accessibility for all other stations on the network with shortest distance and time. This study used the algorithm improved by reflecting the penalty of number of transfers and waiting time of overlapped routes to get the accessibility. KTX Seoul Station is a target place and this algorithm is applied to multi-layer subway bus network of Seoul to calculate the accessibility, therefore this study presented the accessibility of KTX Seoul station by stations.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.69-76
• /
• 2002

With the growth of data communication service by mobile devices, WAP is proposed to efficiently access the Internet contents by user request through wireless condition that has a high error rate and mobility. But, because a transmission speed of WAP is limited, it takes many times to transmit and to receive the data. This paper has studied the WAP packet transmission time using WTP-SAR algorithm. As a method that is to improve transfer capability of WAP, using SAR function in WTP, total message down from upper layer has been fragmented and packet is transmitted through RLP frame time slot. Then, we have analyzed the transmission time of WAP packet with variable RLP layer size on the wireless CDMA network for next generation systems. From the results, we could obtain the WAP packet transmission time and optimal WTP packet size.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.8 no.1
• /
• pp.8-18
• /
• 2012

In early constructed nuclear power plants, Ni-based Alloys 82/182 had been widely used for dissimilar metal welds (DMW) as a weld filler metal. However, Alloys 82/182 have been proven to be susceptible to primary water stress corrosion cracking (PWSCC) in the nuclear primary water environment. The formation of crack due to PWSCC is also influenced by weld residual stresses. Thus, the accurate estimation of weld residual stresses of DMW is crucial to investigate the possibility of PWSCC and instability behaviors of crack due to PWSCC. In this context, the present paper investigates weld residual stresses of nuclear reactor piping nozzles based on 2-D axi-symmetric finite element analyses based on layer-based approach using maximum molten bead temperature. In particular, the effect of analysis parameters, i.e., a thickness of weld layer, an initial molten bead temperature, convection heat transfer coefficient, and geometric constraints on predicted weld residual stresses was investigated.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.140-145
• /
• 2007

The Lambda Networking is emerging to provide the high bandwidth stably for advanced applications such as a large file transfer in High Energy Physics and an Uncompressed HDTV streaming. The User Controlled LightPath(UCLP) is a software to facilitate the Lambda Networking. The UCLP is scalable as using Web Services to define and manage network resources. In this paper, we describe how we deployed the UCLP into KREONet2 and GLORIAD-KR. We also present that the original UCLP creates only a link-level APN due to a SONET technology. As employing a Virtual LAN (VLAN) of the layer2 technology in the UCLP, we can efficiently create a network-level APN.

• Journal of Korea Water Resources Association
• /
• v.44 no.9
• /
• pp.741-751
• /
• 2011

In this study, a methodology was devised to overcome that difficulty for thermal stratification modeling using EFDC. For the increase of reproductability for thermal stratification analysis, the effect of parameter such as distribution of solar radiation, depth of active bed temperature layer, heat transfer coefficients were analyzed. The simulation period was from June to December in 2005 and statistical index is used to analyze the model results. The results showed that distribution of solar radiation is zero and depth of active bed temperature layer is 10 m are suitable for simulation of thermal stratification in Yongdam Dam reservoir. This study results can be used for guideline to analyze the thermal stratification of large dam reservoir in Korea.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.35-41
• /
• 2016

Ceramic-metal based high power LED array package was developed via thick film LTCC technology using a glass-ceramic insulation layer and a silver conductor patterns directly printed on the aluminum heat sink substrate. The thermal resistance measurement using thermal transient tester revealed that ceramic-metal base LED package exhibited a superior heat dissipation property to compare with the previously known packaging method such as FR-4 based MCPCB. A prototype LED package sub-module with 50 watts power rating was fabricated using a ceramic-metal base chip-on-a board technology with minimized camber deformation during heat treatment by using partially covered glass-ceramic insulation layer design onto the aluminum heat spread substrate. This modified circuit design resulted in a camber-free packaging substrate and an enhanced heat transfer property compared with conventional MCPCB package. In addition, the partially covered design provided a material cost reduction compared with the fully covered one.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.132-141
• /
• 2003

We carried out a study on thermohaline structure and phytoplankton com munity in the East China Sea during early summer in 2005. As a result of marine environment and phytoplankton community, three characteristics of water type were identified. The former was characterized by the dominant species with diatoms, Chaetoceros lacinious, Ch. decipiens, Guninardia flaccida, Paralia sulcata, Pseudonitzschia pungens and Pseudosolenia calcar-avis in Chinese coastal waters, the secondary was done by lower water temperature, salinity and the dominant species with dinoflagellates, Prorocentrum donghaiense and Ceratium fusus, in over-all areas and the latter was done by the dominant species with coastal species of diatoms, Skeletonema costafum and Nitzschia longissima and silicoflagellate, Dictyocha speculum var. octopers in the transfer areas of Chinese continental coastal waters. Phytoplankton community in the surface layer identified a total of 66 species belonging to 36 genera. Dominant species was Prorocentrum donghaiense, Chaetoceros lacinious, Skeletonema costatum. Standing crops of phytoplankton in the surface layer flue tuated between $1.5 \times 10^4$cells $L^{-1}$ and $3.5\times 10^{5}$ cells $L^{-1}$. And the highest value appeared in the Changjiang estuaries with high dominance by diatoms and lowest one occurred in the southwestern area of Jeju Island with high dominance by dinoflagellates. Red tides with dinoflagellate, Prororcentrum donghaiense appeared in the frontal areas with mazimum cell density, $3.4\times 10^5$ cells $L^{-1}$. And outbreak environments was low water temperature under $20^{\circ}C$, and low salinity under 31.55 psu. The vertical distribution of red tide organisms went to about 30m depth from surface.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.