• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.629-642
• /
• 1996

ATM switch handles the traffic for a wide range of appliations with different QOS(Quality-of-Service) requirements. In ATM switch, the priority control mechanism is needed to improve effectively the required QOS requirements. In this paper, we propose a priority control mechanism using the cell transfer ratio type and discard threshold in order to archive the cell loss probability requirement and the delay requirement of each service class. The service classes of our concern are the service class with high time priority(class 1) and the service class with high loss priority control mechanism, cells for two kind of service classes are stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the shole range of the buffer and cells for class 1 are allocated up to discard threshold of the buffer. In case cells in the buffer are transmitted, one cell for class 1 is transmitted whenever the maximum K cells for class 2 are transmitted consecutively. We analyze the time delay and the loss probability for each class of traffic using Markov chain. The results show that the characteristics of the mean cell delay about cells for class 1 becomes better and that of the cell loss probability about cells for class 2 becomes better by selecting properly discard threshold of the buffer and the cell transfer ratio according to the condition of input traffic.

• 대한원격탐사학회지
• /
• 제20권2호
• /
• pp.117-124
• /
• 2004

구면 지표 위를 비행하는 위성 영상기의 경사 촬영에 대한 공간 해상도 특성을 분석하고, Time Delay and Integration(TDI) 기법을 사용하는 위성 영상기의 고도가 정상 운영 범위 이하로 저하되었을 때 TDI 불일치로 발생하는 기하 성능 저하를 구면 지표에 대한 경사 촬영으로 보정하였다. 영상기의 시선 방향을 서로 독립적인 두 방향의 각들로 정의하여 구면 지표상의 임의의 관측 점에 대한 경사 촬영 특성을 분석하였고, 임의의 2차원 방향 경사 촬영으로 TDI 영상기의 고도 저하에 대해 성능 보정이 가능함을 해석적으로 보였다. 성능 보정은 TDI 재일치를 통해 Modulation Transfer Function(MTF) 감소 없이 약간의 지상화소거리 증가로 이루어졌다. 연구 결과로 고도 저하 성능 보정을 위한 2차원 경사 촬영의 효과적 방법을 제시하였다. 본 연구에서 제시한 고도 저하에 대한 해결책은 TDI 위성 영상기의 실제 운영에 있어서 임무 수행 보장 및 유연성에 도움이 될 수 있으리라 기대한다.

• Archives of Reconstructive Microsurgery
• /
• 제21권1호
• /
• pp.27-33
• /
• 2012

We studied the results of the immediate microsurgical reconstruction of the distal digit injury with short vascular pedicled partial toe transfer. Thirteen patients with amputation or crush injury of the distal digit who underwent partial toe transfer at the authors' institute over 8-year period were reviewed. Delay between initial injury and reconstruction ranged from 1 to 9 days. All flaps were harvested on a short vascular pedicle, with anastomoses performed at a proximal interphalangeal joint level on the fingers and metacarpophalangeal joint level on the thumbs. Good to excellent cosmetic and functional results were obtained in all cases, with nearly normal-looking fingertip. The mean static two point discrimination was 10 mm. Immediate reconstruction with short vascular pedicled partial toe transfer is an excellent option for the reconstruction of the compostie defect of the distal digit.

• 한국분무공학회지
• /
• 제21권2호
• /
• pp.104-110
• /
• 2016

Main purpose of the current paper is to show results of time lag analysis using phase information of flame transfer function in order to predict combustion instabilities in a gas turbine combustor. The flame transfer function (FTF) is modeled using a commercial Computational Fluid Dynamics (CFD) code (Fluent). Comparisons of the modeled flame shapes with the measured ones were made using the optimized heat transfer conditions and combustion models. The FTF modeling results show a quite good agreement with the measurement data in predicting the phase delay (i.e. time lag). Time lag analysis results using the phase of FTF shows better combustion instability prediction accuracy than using time lag calculated from the steady state flame length.

• 대한설비공학회지:설비저널
• /
• 제16권2호
• /
• pp.185-193
• /
• 1987

The heat transfer characteristics from a solid sphere in a fluctuating air flow is simulated numerically in the range of the Reynolds numbers, $1\;{\leqslant}\;Re\;{\leqslant}\;40.$ Such a situation may be encountered in forced convection from a heated spherical particle in a sound field or oscillat-ing flow. The amplitude and phase delay in the heat transfer response to the flow oscillation are computed for a small amplitude flow. The instantaneous response of heat transfer is simulated for the large amplitude oscillation and compared with the quasi-steady response. The effect of the oscillation on the time - mean value in the local and overall heat transfer rate is discussed along with the change in the flow .field.

• 대한기계학회논문집B
• /
• 제21권12호
• /
• pp.1563-1575
• /
• 1997

To understand EHD nucleate boiling heat transfer enhancement, EHD effects on R-113 nucleate boiling heat transfer in a non-uniform electric field were investigated. The pool boiling heat transfer and the dynamic behavior of bubbles in d.c./a.c. electric fields under a saturated or subcooled boiling were studied by using a plate-wire electrode and a high speed camera. From the pool boiling heat transfer study, the shift of the pool boiling curve, the increase of the heat transfer and the delay of ONB and CHF points to higher heat fluxes were observed. From the dynamic behavior of bubbles, it was observed that bubbles departed away from the whole surface of the heated wire in radial direction due to EHD effects by a nonuniform electric field. With increasing applied voltages, the bubble size decreased and the active nucleation site and the departure number of bubbles showed the different trend. The present study indicates that the EHD nucleate boiling heat transfer is closely connection with the dynamic behavior of bubbles and the secondary flow induced near the heated surface. Therefore, the basic studies on the bubble behavior such as bubble frequency, bubble diameter, bubble velocity and flow characteristics are necessary for complete understanding of the enhancement mechanism of the boiling heat transfer using an electric field.

• 정보과학회 논문지
• /
• 제41권10호
• /
• pp.824-831
• /
• 2014

HTTP (Hypertext Transfer Protocol) 적응적 스트리밍은 네트워크 변화에 적응적으로 비디오 품질을 조절한다. HTTP 적응적 스트리밍은 TCP (Transmission Control Protocol)를 기반으로 비디오를 전송하기 때문에 높은 지연을 갖는 네트워크에서 가용대역폭을 부정확하게 측정하여 불필요하게 비디오 품질을 조절한다. 본 논문에서는 HTTP 적응적 스트리밍 서비스의 품질 향상과 부드러운 재생을 위해 버퍼 기반의 비디오 품질 조절 기법을 제안한다. 제안하는 기법은 지연을 고려한 스트리밍 모델을 통한 정확한 가용대역폭 측정, 불필요한 품질 조절을 방지하기 위한 비디오 품질의 유지 가능성 계산, 버퍼상태에 적응적으로 비디오를 요청할 시간을 결정함으로써 비디오 품질을 조절한다. 시뮬레이션을 통해 제안한 기법이 높은 지연을 갖는 네트워크에서 HTTP 적응적 스트리밍 서비스의 품질을 향상시키고 부드럽게 비디오 품질을 조절하는 것을 확인하였다.

• 한국정보통신학회논문지
• /
• 제21권12호
• /
• pp.2318-2324
• /
• 2017

차세대 암호로 대두 되고 있는 양자암호는 양자키전송 프로토콜과 양자비밀직접통신으로 나뉘어 연구되고 있다. 양자키전송 프로토콜은 사용상의 비효율성 때문에 현대암호와 병합하여 사용하거나 OTP를 포기한 형태로 사용될 수 있다. 본 고에서는 양자키전송이 아닌 직접통신을 양자암호화 하여 진행하는 알고리즘을 제안하였다. 양자비밀 직접통신을 구현하는 방식은 2채널 방식을 이용하였다. 두 채널 중 한쪽 채널에 아인슈타인의 중력장에의한 시간지연 함수를 적용하여 두 채널간 시간차를 적용하는 방식의 양자비밀직접통신 프로토콜을 설계 하였다. 제안하는 시간 지연 효과는 중력렌즈 현상을 반영한 것으로 점질량에 의한 시간지연을 제안하였다. 원심가속도를 이용한 중력 발생기는 점질량계에 포함되며 이를 이용한 시간지연은 중력계의 변화에 의한 상관관계를 보임을 알 수 있다.

• International Journal of Computer Science & Network Security
• /
• 제23권9호
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• 대한전기학회논문지
• /
• 제36권10호
• /
• pp.713-718
• /
• 1987

A new method for the modeling of non-ideal dc-dc converters whose switching times are finite is proposed. The effects of finite turn-on, turn-off times, delay time, storage time, reverse recovery process on the system stability, dc transfer function and efficiency are investigated. It is verified how system poles are changed and how dc transfer function and efficiency are decreased by non-ideal switching.