• Advances in aircraft and spacecraft science
• /
• 제4권3호
• /
• pp.237-267
• /
• 2017

Automatic trajectory re-planning is an integral part of unmanned aerial vehicle mission planning. In order to be able to perform this task, it is necessary to dispose of formulas or tables to assess the flyability of various typical flight segments. Notwithstanding their importance, there exist such data only for some particularly simple segments such as rectilinear and circular sub-trajectories. This article presents an analysis of a new, very efficient, way for an airplane to fly on an inclined circular trajectory. When it flies this way, the only thrust required is that which cancels the drag. It is shown that, then, much more inclined trajectories are possible than when they fly at constant speed. The corresponding equations of motion are solved exactly for the position, the speed, the load factor, the bank angle, the lift coefficient and the thrust and power required for the motion. The results obtained apply to both types of airplanes: those with internal combustion engines and propellers, and those with jet engines. Conditions on the trajectory parameters are derived, which guarantee its flyability according to the dynamical properties of a given airplane. An analytical procedure is described that ensures that all these conditions are satisfied, and which can serve for producing tables from which the trajectory flyability can be read. Sample calculations are shown for the Cessna 182, a Silver Fox like unmanned aerial vehicle, and an F-16 jet airplane.

• 산업경영시스템학회지
• /
• 제44권4호
• /
• pp.169-176
• /
• 2021

Maritime monitoring requirements have been beyond human operators capabilities due to the broadness of the coverage area and the variety of monitoring activities, e.g. illegal migration, or security threats by foreign warships. Abnormal vessel movement can be defined as an unreasonable movement deviation from the usual trajectory, speed, or other traffic parameters. Detection of the abnormal vessel movement requires the operators not only to pay short-term attention but also to have long-term trajectory trace ability. Recent advances in deep learning have shown the potential of deep learning techniques to discover hidden and more complex relations that often lie in low dimensional latent spaces. In this paper, we propose a deep autoencoder-based clustering model for automatic detection of vessel movement anomaly to assist monitoring operators to take actions on the vessel for more investigation. We first generate gridded trajectory images by mapping the raw vessel trajectories into two dimensional matrix. Based on the gridded image input, we test the proposed model along with the other deep autoencoder-based models for the abnormal trajectory data generated through rotation and speed variation from normal trajectories. We show that the proposed model improves detection accuracy for the generated abnormal trajectories compared to the other models.

• 한국해양공학회지
• /
• 제37권4호
• /
• pp.145-157
• /
• 2023

Due to a recent increase in maritime activities in South Korea, the frequency of maritime distress is escalating and poses a significant threat to lives and property. The aim of this study was to validate a drift trajectory prediction technique to help mitigate the damages caused by maritime distress incidents. In this study, OpenDrift was verified using satellite drifter data from the Korea Hydrographic and Oceanographic Agency. OpenDrift is a Monte-Carlo-based Lagrangian trajectory modeling framework that allows for considering leeway, an important factor in predicting the movement of floating marine objects. The simulation results showed no significant differences in the performance of drift trajectory prediction when considering leeway using four evaluation methods (normalized cumulative Lagrangian separation, root mean squared error, mean absolute error, and Euclidean distance). However, leeway improved the performance in an analysis of location prediction conformance for maritime search and rescue operations. Therefore, the findings of this study suggest that it is important to consider leeway in drift trajectory prediction for effective maritime search and rescue operations. The results could help with future research on drift trajectory prediction of various floating objects, including marine debris, satellite drifters, and sea ice.

• 대한원격탐사학회지
• /
• 제39권6_1호
• /
• pp.1331-1339
• /
• 2023

항공기상청은 국가항행계획(National ATM Reformation and Enhancement Plan, NARAE)을 지원하기 위해 NARAE-Weather 프로젝트를 통한 궤적기반 항공기상 서비스를 개발 중에 있다. 특히, 기상자료는 표준화된 형식의 디지털 데이터를 제공하므로 항공기상 데이터와 항공교통 정보와 통합하는 것이 가능하다. 따라서 본 논문에서는 수치모델 자료의 구조화를 통해 기상 정보와 비행 궤적 정보의 데이터 통합을 위한 접근 방식을 제안하였다. 구조 변환된 자료를 활용한 추출결과는 성능 측면에서 원본자료에서 추출한 결과보다 우수한 결과를 보였으며, 해당 연구를 통해 항공 운항의 안전성과 효율성을 향상시키는데 도움이 될 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.690-699
• /
• 2008

In this paper a conventional approach for design and analysis of subsonic air vehicle is used. First of all subsonic aerodynamic coefficients are calculated using Computational Fluid Dynamics(CFD) tools and then wind-tunnel model was developed that integrates vehicle components including control surfaces and initial data is validated as well as refined to enhance aerodynamic efficiency of control surfaces. Experimental data and limited computational fluid dynamics solutions were obtained over a Mach number range of 0.5 to 0.8. The experimental data show the component build-up effects and the aerodynamic characteristics of the fully integrated configurations, including control surface effectiveness. The aerodynamic performance of the fully integrated configurations is comparable to previously tested subsonic vehicle models. Mathematical model of the dynamic equations in 6-Degree of Freedom(DOF) is then simulated using MATLAB/SIMULINK to simulate trajectory of vehicle. Effect of altitude on range, Mach no and stability is also shown. The approach presented here is suitable enough for preliminary conceptual design. The trajectory evaluation method devised accurately predicted the performance for the air vehicle studied. Formulas for the aerodynamic coefficients for this model are constructed to include the effects of several different aspects contributing to the aerodynamic performance of the vehicle. Characteristic parameter values of the model are compared with those found in a different set of similar air vehicle simulations. We execute a set of example problems which solve the dynamic equations to find the aircraft trajectory given specified control inputs.

• 한국항행학회논문지
• /
• 제25권3호
• /
• pp.217-222
• /
• 2021

EOTS(electro-optical tracking system)는 유도무기의 성능 평가를 위해 유도무기를 추적하여 영상을 획득하는데 활용되고 있다. 유도무기에 대한 추적을 잃어버렸을 경우 유도무기가 매우 빠르게 비행하기 때문에 운용자가 이를 다시 포착하는 것은 거의 불가능하다. 레이더나 텔레메트리 데이터를 활용하여 재 포착 하는 방법이 활용되고 있으나 데이터를 실시간으로 수신할 수 있는 통신망의 설치가 수반되어야하기 때문에 장소에 대한 제약이 따른다. 하지만 유도무기 비행시험 수행 시 계산되는 예상 궤적은 실시간으로 수신할 필요 없이 저장해두었다가 사용할 수 있기 때문에 통신망 설비와 관계없이 활용이 가능하다. 본 논문에서는 미리 알고 있는 비행체의 예상 궤적을 활용하여 비행체를 잃어버렸을 시 비행체의 위치를 예상하는 방법을 제안한다. DTW (dynamic time warping)를 통해 예상궤적과 추적궤적을 비교하여 비행체의 각속도를 추정하고 이를 Kalman Filter의 보정단계에서 관측 값으로 활용하여 비행체의 다음 상태를 예측한다. 제안한 방법의 타당성을 실제 비행체 궤적에 적용하여 검증하였다.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.296-302
• /
• 2022

This paper proposes a center of plantar foot pressure (CoP) trajectory estimation method based on Gaussian process regression, with the aim to show robust results regardless of the regions and numbers of FSRs of the insole sensor. This method can bring an interpolation between the measurement points inside the wearable insole sensor, and two experiments are conducted for performance evaluation. For this purpose, the input data used in the experiment are generated in three types (13 FSRs, 8 FSRs, 5 FSRs) according to the regions and numbers of FSRs. First, the estimation results of the CoP trajectory are compared using Gaussian process regression and weighted mean. As a result of each method, the estimation results of the two methods were similar in the case of 13 FSRs data. On the other hand, in the case of the 8 and 5 FSRs data, the weighted mean varies depending on the regions and numbers of FSRs, but the estimation results of Gaussian process regression showed similar results in spite of reducing the regions and numbers. Second, the estimation results of the CoP trajectory based on Gaussian process regression during several gait cycles are analyzed. In five gait cycles, the previous cycle and the current estimation results are compared, and it was confirmed that similar trajectories appeared in all. In this way, the method of estimating the CoP trajectory based on Gaussian process regression showed robust results, and stability was confirmed by yielding similar results in several gait cycles.

• 한국공간정보시스템학회 논문지
• /
• 제11권1호
• /
• pp.127-136
• /
• 2009

이 논문은 RFID 데이터 스트림의 변화 특성을 고려하면서 단일 패스로 이동궤적 패턴을 실시간 추출하는 새로운 기법을 제안한다. RFID, 센서와 무선 네트워크 기술의 발달로 인해 현실 세계에서 실시간으로 데이터를 수집하고 유용한 패턴을 탐사하는 연구에 많은 관심이 집중되고 있다. 스트림 데이터에서 순차 패턴 또는 이동궤적 패턴을 탐사하는 기존의 연구 기법들은 반복적으로 데이터베이스 또는 트리를 탐색하는 고비용 문제점과 시간의 변화에 따르는 동적 특성을 실시간으로 패턴에 반영하지 못하는 단점이 있다. 제안하는 기법은 시간에 따라 RFID 데이터 스트림의 변화를 정확히 반영하기 위해 시간진화 그래프를 이용하여 이진 시간관계 테이블에 빈발한 2-길이 항목간 정보를 유지한다. 또한 다중 패스의 문제점을 해결하기 위해 t 시점에 이진 시간관계 테이블을 이용하여 k-길이의 후보 이동궤적 패턴을 추론하고, t+1 시점에서 후보 패턴을 검증하는 과정을 통해 k-길이 이동궤적 패턴을 단일 패스로 추출한다. 실험결과 제안하는 기법은 기존의 Apriori-계열 기법들과 비교하여 약 7% 정도 후보 패턴의 비율이 적게 생성되어 시간 및 공간 복잡도 측면에서 우수한 성능을 보였다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권2호
• /
• pp.85-90
• /
• 2017

최근 모바일 컴퓨팅 환경의 발달로 다양한 모바일 장비들이 보급되고 있다. 특히 GPS가 탑재된 모바일 장비들의 보급이 활발해지면서 위치정보를 이용한 다양한 응용서비스들이 생겨나고 있다. 이 논문에서는 연속적인 시간에서 획득한 이동객체 위치 정보들의 집합, 즉 이동객체의 궤적을 저장, 관리하기 위한 시스템 모델 및 대용량 이동객체 데이터를 빠르게 질의할 수 있는 UDF (User-Defined Functions) 기반 궤적 인덱스 기법과 질의 선 실체화 테이블 기법을 제안하고 실험을 통해 각 기법들의 성능을 비교 평가한다. 실험에서 질의 선 실체화 테이블 기법이 UDF 기반 궤적 인덱스 기법보다 실행시간에서 약 1.2배 빠른 결과를 보였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권1호
• /
• pp.27-35
• /
• 2004

In the field of machine vision using a single camera mounted on a mobile robot, although the detection and tracking of moving objects from a moving observer, is complex and computationally demanding task. In this paper, we propose a new scheme for a mobile robot to track and capture a moving object using images of a camera. The system consists of the following modules: data acquisition, feature extraction and visual tracking, and trajectory generation. And a single camera is used as visual sensors to capture image sequences of a moving object. The moving object is assumed to be a point-object and projected onto an image plane to form a geometrical constraint equation that provides position data of the object based on the kinematics of the active camera. Uncertainties in the position estimation caused by the point-object assumption are compensated using the Kalman filter. To generate the shortest time trajectory to capture the moving object, the linear and angular velocities are estimated and utilized. The experimental results of tracking and capturing of the target object with the mobile robot are presented.