• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1044-1053
• /
• 2010

Transmitting correct train control information is important in a train control system which demands safety. The train control information includes the maximum speed of trains, position of preceding trains, incline of tracks and curve sections etc. A radio frequency-communication based train control system is influenced by the noise and interference because the train control information is transmitted by wireless between a on-board system and wayside system. The radio frequency-communication based train control system is a mobile communication system due to moving trains. The inter symbol interference(ISI) occurs by the multipath fading in the mobile ommunication system. As signal-to-noise ratio(SNR) is decreased by the ISI, the train control information is not received correctly. In case of tunnel section, numerous reflected waves exist. Therefore, the power density of receiver is decreased by difference among the received times, magnitudes, phases through the multipath. So, the train suddenly is stopped by the fail-safe operation in the train control system on account of decreasing the power density of receiver. In this paper, a line of sight model-(Additive White Gaussian noise(AWGN) channel), rayleigh and rician fading model are presented. Probability density functions which are related to the SNR are derived from the models. The fading phenomenon severely occurs as a result of analyzing the probability density functions. So, the space diversity method is used in order to reduce the fading effect and it is demonstrated by using Matlab program.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.576-581
• /
• 2007

The purpose of this study is to investigate changes in the forearm-muscle fatigue of a train driver operating the MasCon by using EMG (electromyogram) measurement technique. Train drivers usually use their forearm 4hours/day for normal operation. Accordingly, few different EMG signals of deltoid, biceps brachii, brachioradialis, flexor carpi ulnaris muscle of upper extremity have been measured and analyzed. The raw EMG Signals have been converted into median frequency using spectrum analysis. As the result, 80% of 10 subjects (real train drivers) showed that median frequency value of all four muscles has been reduced after 30 minutes of train operation. This results demonstrated that operating MasCon for 30 minutes could induce muscle fatigue.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1681-1688
• /
• 2011

The platform screen door open-close mechanisms at today's subway are divided by "Radio Frequency method" and "Method at entrance perception sensor". In the case of "method at entrance perception sensor", there happen a lot of occasions of malfunctioning that may cause problems in terms of timeliness, swiftness and reliability of train operation and even ends up to train operation stop since the perceiving process is complicated and it is prone to have dust on lenses, position alteration by train vibration, and less reflection light in the case of new train. In this study, we find how to minimize possible problems in terms of maintenance during train operation period, and seek its alternatives in order not only to have no malfunction in perception but also to cause no disturbance in train operation through dealing organically when perceiving door open-close to minimize delay time.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.690-695
• /
• 2004

In order to develop a high speed train, various conditions have been considered. Fatigue strength assessment by the fluctuation of pressure is an important one. In this study, the fluctuation and frequency of pressure is measured when KHST(Korean High Speed Train) passes through tunnels in the Kyung-Bu high-speed line. And the characteristics of pressure fluctuation is analysed and formulated. The results of analysis are as follows. The train entering speed and fluctuation value are related. The pressure increasing is generated in proportion to train velocity at leading car. When two train is passing through the tunnel, the pressure value is $1.5\~2$ times higher than one train is passing. The damping ratio of pressure fluctuation is about $92\%$. The number of pressure fluctuation in a tunnel is 4 to 6 times. The result in this study would be a good guidance to calculate the fatigue life and the reliability index of body structure.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.929-935
• /
• 1998

Safety diagnosis of electric train driving system is performed using vibration signals of running electric train. Safety diagnosis is tried on the viewpoints of the appreciation of superannuation and the fault diagnosis of motor, reduction gear and bogie. The appreciation of superannuation is checked by the vibration levels of driving parts and the fault diagnosis is done by analyzing the frequencies of the vibration signals which are measured directly from a running electric train. The results shows that the vibration levels of each parts increase as the train gets older and each parts have their own frequency patterns of the vibration. Vibration propagation path is also investigated using calculated the coherence value between bogie and driving system. As the results, it is known that vibration signal can be utilized successfully for the safety diagnosis of the driving part of electric train.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.10-14
• /
• 2015

Due to the characteristics of the vehicle structure, the magnetic levitation train has a confined bottom space thus a study on miniaturization and weight reduction of auxiliary power unit is essential. This auxiliary power unit is an essential device used for illumination, air conditioning, heating and air brake equipment excluding the motor. The previous auxiliary power unit for magnetic levitation train has used the hard switching having a high switching frequency with heavy loss in order to reduce the size of filter reactor and transformer but the reduction in volume was not significant. In this paper, by reducing the loss, reducing the size of the cooling unit and by increasing the switching frequency using the soft switching of resonant converter, it has miniaturized and reduced the weight of filter reactor and transformer which occupy significant space in the auxiliary power unit. This study has verified the performance of 50KVA grade prototype through simulated interpretation and analysis, and compared the size and weight of auxiliary power unit of the previous magnetic levitation train.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.19-27
• /
• 2012

In railway tunnel environment, the reliability of a high-data-rate and real-time train-to-wayside communication should be maintained especially when high-speed train moves along the track. In China and Europe, the communication frequency around 900 MHz is widely used for railway applications. At this carrier frequency band, both of the solutions based on continuously laid leaky coaxial cable (LCX) and discretely installed base-station antennas (BSAs), are applied in tunnel radio coverage. Many available works have concentrated on the radio-wave propagation in tunnels by different kinds of prediction models. Most of them solve this problem as natural propagation in a relatively large hollow waveguide, by neglecting the transmitting/receiving (Tx/Rx) components. However, within such confined areas like railway tunnels especially loaded with train, the complex communication environment becomes an important factor that would affect the quality of the signal transmission. This paper will apply a full-wave numerical method to this case, for considering the BSA or LCX, train antennas and their interacted environments, such as the locomotive body, overhead line for power supply, locomotive pantograph, steel rails, ballastless track, tunnel walls, etc.. Involving finite-difference time-domain (FDTD) method and uni-axial anisotropic perfectly matched layer (UPML) technique, the entire wireless RF downlinks of BSA and LCX to tunnel space to train antenna are precisely modeled (so-called integrative modeling technique, IMT). When exciting the BSA and LCX separately, the field distributions of some cross-sections in a rectangular tunnel are presented. It can be found that the influence of the locomotive body and other tunnel environments is very significant. The field coverage on the locomotive roof plane where the train antennas mounted, seems more homogenous when the side-laying position of the BSA or LCX is much higher. Also, much smoother field coverage solution is achieved by choosing LCX for its characteristic of more homogenous electromagnetic wave radiation.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.5-13
• /
• 2013

In the previous research, dynamic results have been analyzed in the time and frequency regions. Time and frequency region can be transformed by the Fourier transform. This transform is very useful about analyzing system behaviors. However, because of coupling, it cannot give clear results in the real system including lots of defects. In this paper, we introduced the analysis based on quefrency region to represent physical means clearly from complicated results. We simulated the drive train system which has defects, and compared between frequency and quefrency region to show its excellence. To do this process, We established mathematical model. The equation of motion was derived by the Lagrange equation and constraint equations. The constraint equation included relationships about gear mesh, flexibility of shaft. About numerical analysis, the Newmark beta method was used to get results. And FFT (Fast Fourier Transform) which converts results from time domain to frequency, qufrequency was used.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.691-706
• /
• 2008

ATP(Automatic Train Protection) system in railway signaling system is the important one grasping the position and velocity of a train. The wayside transmitter of ATP system is installed between rails. In concrete slab track, the signal current using wayside transmitter of ATP system is influenced by reinforcing bars. The magnetic coupling between reinforcing bars and wayside transmitter of ATP system as a filter makes an input current distorted. So, it makes an alternating current signal with a desirable size not transmit to on-board system of a train. Way to decrease the distortion of an input current signal frequency is to avoid maximum induction current frequency. And the induction phenomenon between reinforcing bars insulated and wayside transmitter of ATP system does not occur. In this paper, we represent the model about wayside transmitter of ATP system and reinforcing bars on the concrete slab tracks, and calculated the parameters demanded for the model. Also, we demonstrated it through the Maxwell program. Furthermore, we calculated impedance on wayside transmitter used in KVB system and ERTMS/ETCS system which are a kind of ATP system, frequency response of induction current, using the Matlab, and demonstrated the validity of it, using the PSpice program.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.465-471
• /
• 2009

In this paper, a relationship between the noise and vibration of a high-speed train's wheelset is examined by using time-varying frequency analysis with random data analysis which together contributes to a reduction in the number of experimental running. The noise and vibration of the wheelset is mainly caused by an interaction between the wheel and railway which shows in non-stationary characteristics. For the analysis, they are measured by some microphones and accelerometers, and those signals are post-processed by time-varying frequency analysis with random data analysis. From the analysis, their methods are useful for analyzing the noise and vibration of high-speed train's wheelset.