• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1083-1088
• /
• 2008

The first task for the development of a train system is to define the system and to determine its requirements. Reliability target is one of the requirements defined in the system requirements. In railway applications it is advised to follow the procedures given in IEC 62278 to fulfill reliability requirements. The reliability requirements are derived from the customer's needs. The way in which the system requirements reflect the customer's needs is strongly dependent on the characteristics of the product. In general the customer of commercial trains presents the system requirements from their needs. However, the relation between the customer and supplier is equivocal for a project to development a prototype train, and the reliability program should be different from that of an usual commercial project. This paper deals with the reliability management and assessment plan carried out for the on-going "Next generation high-speed train development project".

• 전기학회논문지
• /
• 제64권5호
• /
• pp.830-837
• /
• 2015

A study which is to develop the low-cost urban railway system for low-density line such as Gwang-ju subway Line 2 is in progress, and its TCS(Train Control System) is required as an economic system which is able to train operation suitable in low-density line. We have developed the signaling equipment which is configured with automatic block system between stations, and the control center's equipment in order to meet the requirements of TCS mentioned above. In this paper, we propose the control procedure of ATS to be required for train operation management in the low-density line such as Gwang-ju subway Line 2. The control procedure of ATS considered all features such as the requirements analysis for train operation management, the functions of train control system to be applied and the block type. Also, it considered the station(interlocking, passenger, turn-back) type, station control(stop, route, departure, turn-back departure, turn-back) type, and train operation management for exiting and entering depot. The ATS control procedure proposed in this paper has an advantage in the cost and efficiency through unification and optimization of its function. And in cost of operating and maintenance, the ATS system has a feature that can be significantly reduced.

• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.22-31
• /
• 2002

A high-speed rail system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Not only the requirements of the large-scale system dictate the contracts with the suppliers but also become the basis for the development process, project execution, system integration, and testing. The requirements database provide the system design specification of all development activities. Using the RDD-100, a systems engineering tool, the Korea next-generation high-speed rail program can establish requirements traceability and development process management in performing the enabling train technology development projects. This paper presents the results from a computer-aided systems engineering application to the Korea next-generation high-speed railway project. Especially, the focus of the study was on requirement management and PBS(Product Breakdown Structure) management.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.84-87
• /
• 2001

중대사고관리는 원전의 노심손상사고를 예방하거나 완화시키기 위하여 기존의 가용자원이나 시스템, 운전의 행위를 사용하는 것을 말한다. 제어실이나 기술지원반을 위하여 중대사고관리를 위하여 개발된 TRAIN(Training pRogram for Accident Management Program In Nuclear Power Plant)의 초기문자로 명명된 시스템을 본 논문에 소개하였다. TRAIN은 중대사고현상 KB(Knowledge Base)와 사고시나리오 KB, 제어도와 함께 사고관리 절차도 그리고 필요정보로 구성되어있으며 제어실이나 기술지원반에게 중대사고의 현상지식을 취득하게 하고, 발전소의 취약특성을 파악하게 하며, 상당한 스트레스하에서 주어진 문제를 해결하게 하는데 본 연구의 결과는 기여할 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.206-210
• /
• 2007

IEC 62278 presents a process to implement a consistent approach to the management of reliability for railway applications. A reliability program has to be established at the outset of a project in order to manage reliability activities effectively through the life cycle. The first step of the reliability program is to evaluate reliability requirements and targets based on the system specifications. The system specifications are derived from the customer's needs. The way in which the system requirements reflect the customer's needs is strongly dependent on the characteristics of the product. In general the customer of commercial trains presents the system requirements from their needs. However, the relation between the customer and supplier is equivocal for a project to development a prototype train, and the reliability program should be different from that of an usual commercial project. This paper deals with a process to manage reliability activities for the development of a protype train based on the experiences obtained from the development of the Korea High-Speed Train: Hanvit-350.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.910-917
• /
• 2011

CBTC(Communication Based Train Control) car-borne equipment, a part of the communication based train control system, mainly consists of automatic train protection(ATP) functions, automatic train operation(ATO) functions as well as the interface functions with other equipment including CBTC wayside equipment and train control management system etc. The CBTC car-borne software implementing ATP/ATO functions is a real-time embedded software requiring a high level of safety and reliability. To satisfy the requirements of the CBTC car-borne software, the model-based design techniques are applied with SCADE(Safety-Critical Application Development Environment) to the development of the CBTC car-borne software. In this paper, we illustrate the process modeling the car-borne ATP/ATO functions satisfying system requirement specification with system requirement management, modeling and document generation tools etc. supported by SCADE. In addition, the developed models corresponding to the ATP/ATO functions are applied to the train with CBTC car-borne equipment through its corresponding EN-50128 standards-compliant C code generated by the code generator. It is shown from the test result that the ATP/ATO models developed by SCADE work well while the trains are running in driverless operation mode.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1032-1038
• /
• 2008

KTX train system is composed of TORNAD* network for transmitting information of train's internal equipments and OBCS which proceed information within train. OBCS of one trainset consisted of 28 equipments takes intelligent and dynamic composition according to equipment handling, train command and control flow. Each OBCS which is installed within trainset handle and supervise mutually action information about equipments, transmit it to driver to transmit information about train operation and preventive management. This mutual supervision and information transmission use KTX TORNAD* network system. TORNAD* network system is the one which is uniquely developped by GEC ALSTHOM, the KTX trainset manafacturing provider and this field is excluded from technical know-how transfer item. Through the research on analysis method of KTX TORNAD* system data structure which is operating on Seoul-Pusan Line, I hope that this thesis can contribute to train network system's standardization after applying it to improvement of train network system maintenance, enhancing quality of train service and applying it to future Korean rolling stock network system development.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.170-173
• /
• 2006

Requirement management is an essential process that has a significant influence on the project success. Due to the evolutionary development nature of requirement, the effective management for requirement must include change process and configuration control. This paper describes how to implement effective requirement management process to the Korea Tilting Train eXpress development with the application of a model based systems engineering tool.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.263-264
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.261-262
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.