• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1646-1653
• /
• 2020

In case that the train driving with diverse high-speeds is manipulates by real-time remote control in long-term evolution-railway (LTE-R) system with frequent handovers, the real-time safe transmission of train control messages is important element. The handover delay time stability method regardless of train speed in order to enhance the real-time remote train control stability in LTE-R system is proposed in the paper. Furthermore, the variable speeds and altitudes of train collected by real measurements are applied for upgrading simulation accuracy. The simulation results inform that not only there are stable and unstable ranges to A3 offset values, but the optimal offset value for average handover delay is in unstable range. However, the late handover with A3 offset values in stable range should be chosen to get the predictable handover delay regardless of train speed rather than the early handover with A3 offset values in unstable range, since the key value of high-speed Korea railway system is the stability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.797-802
• /
• 2008

High Speed Rail Train Control System consists of CTC, IXL and ATC. IXL and ATC perform train control and command via interchanging relevant information between a signal room and CTC. However, it is proved that IXL and ATC are attributed to train delay error since those systems are highly sensitive to trackside conditions. Especially, network error on IXL blocks transmitting signal information to adjacent signal room so that its effects give rise to system overall problems. In order to figure out the measures for which minimizing the occurrence rate of train delay error due to HSR TCS, This paper is performed analysis on communication network structure, the length of SSI network roof and SSI-TFM distance by examining and analyzing the error cases related to IXL in a network aspect.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.179-185
• /
• 2007

In large station with high density traffic, trains can be hardly controlled by CTC but by station dispatcher because CTC has difficulties in monitoring all states of affairs happening within each station such as departures, arrivals of many trains from different lines and shunting of trains to move between yards and platforms, etc. Therefore the station's dispatcher has to make quick decision about how to reschedule the times and routes for all the trains scheduled within a specific time window. And such decision becomes harder when an unexpected delay occurs because a delay occurring in a train propagates other trains as time goes on. Generally, it is called the conflict detection and resolution to adjust beforehand the distorted schedule due to a delay to original schedule. Our research is different from the state of the arts in that ours determines simultaneously the routes and the times of arrival and departure of trains, although others do only the arrival and departure time of the trains without considering the alternative routes and shunting of the station. This study suggests a mathematical approach for how to detect in advance and resolve efficiently the conflicts occurring within a station and it will be shown how to reduce delay using our approach by means of analysing the schedule of ChyungRyangRi station.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2775-2781
• /
• 2011

Urban Transit Train Radio is Radio Communication system that is used official business as leading motive for train safety running among the train crew and the central control center and drive-caring-chamber on main line and branch line. This system is operated that organizes talking path on handset of terminal after the train crew receives audio and understands call voice on speaker of terminal at calling the train of the central control center. When the central control center calls the specific train uses all call radio form, the train crew doesn't recognize the call cause the train situation, noise and action as train control. So there is a delay response cause reset call at the central control center. This research discusses the management of subway radio system and describes the call the train system that recognize train call number of all-call used between the central control center and the train crew.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.402-409
• /
• 2014

Wireless local area network (WLAN) is a widely used wireless access method due to its easy usability and excellent performance. However, its performance degrades significantly as the number of users increases. In busy train stations, where the number of WLAN users are large and, more importantly the number of simultaneous packet transmission attempts is extremely large due to the time synchronization upon train arrival, the packet transmission delay problem is very severe and almost impossible for WLAN stations to initiate communication with WLAN networks. In this paper, a novel distributed WLAN access scheme for efficient WLAN communication in busy train stations is proposed. Using the proposed scheme, WLAN access delay can be significantly reduced under highly congested traffic environments. Therefore, a significant performance enhancement for the WLAN performance used in the Communication Based Train Control (CBTC) can be achieved.

• International Journal of Railway
• /
• v.3 no.3
• /
• pp.106-112
• /
• 2010

Accidents at level crossing have large portion on train accidents, and causes economical loss by train delay and operational interruption. Various safety equipments are employed to reduce the accident at level crossing, but existing warning device, and crossing barrier are simple train-oriented protection equipments. In this paper, intelligent railway level crossing system is proposed to prevent and reduce accidents. For train driver's prompt action, image of level crossing and obstacle warning message are continuously provided to train driver through wireless communication in level crossing control zone. Obstacle warning messages, which are extracted by computer vision processing of captured image at level crossing, are recognized by train driver through message color, flickering and warning sound. It helps train driver to decide how to take an action. Meanwhile, for vehicle driver's attention, location and speed of approaching train are given to roadside equipments. We identified the effect of proposed system through test installation at Sea train and Airport level crossing of Yeong-dong line.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.717-722
• /
• 2011

In this paper, noise source localization of the Korean high speed train was conducted by using delay and sum beam-forming method of a microphone array. At first, the microphone array having irregular configuration was designed and the resolution of which was analyzed from parameters such as 3-dB bandwidth and maximum side-lobe level. After the demonstration, the microphone array was applied on the high speed train and noise localization of the high speed train driving at 300 km/h was performed successfully.

• International Journal of Railway
• /
• v.4 no.4
• /
• pp.93-96
• /
• 2011

The basic element of the EMS suspension is the electromagnet system, which suspends the vehicle without contact by attracting forces to the rails at the guideway. The suspension of a vehicle by attractive magnetic forces is inherently unstable and consequently it is continuously adjusted by the strength of the suspending electromagnet from rail irregularity and bending of the guideway. In order to improve reliable tracking, it needs to get feedback signals without measurement delay time. In this paper the concept of feedback control system with Kalman Filter in EMS is proposed. The input signals in the feedback control system are an air-gap and an acceleration signal. The air-gap signal with noise from the gap sensor is transformed to the filtered air-gap signal y without measurement delay time by using Kalman Filter. The filtered air-gap signal is transformed to a relative velocity and a relative acceleration signal. Then it multiplies these values by gain matrix in order to get the actuator's reference voltage value. The simulation results show that the dynamic responses of the suspension system can be improved by reducing the influence of measurement delay time of air-gap signals.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1681-1688
• /
• 2011

The platform screen door open-close mechanisms at today's subway are divided by "Radio Frequency method" and "Method at entrance perception sensor". In the case of "method at entrance perception sensor", there happen a lot of occasions of malfunctioning that may cause problems in terms of timeliness, swiftness and reliability of train operation and even ends up to train operation stop since the perceiving process is complicated and it is prone to have dust on lenses, position alteration by train vibration, and less reflection light in the case of new train. In this study, we find how to minimize possible problems in terms of maintenance during train operation period, and seek its alternatives in order not only to have no malfunction in perception but also to cause no disturbance in train operation through dealing organically when perceiving door open-close to minimize delay time.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.724-730
• /
• 2011

A turnout serves to switch train from one line to another. The turnout consists of a Point which is switchs the rail to induce direction, and a Crossing which is cross over two line on the plane surface, and a Lead where is middle section in Point to Crossing. Point machine, consists of a turnout, is important facilities in railway signal, that is safety issue relates in derailment of the train. Recently, train delay and accident frequently occurred because of the turnout include in a point machine trouble of electrical and mechanical. So in order to prevent train accident the research is advanced, install of normal and reverse indication lamp in a point machine, development of adherence detector for sensing the status of adhesion between the stock rails and tongue rails etc. In this paper investigates the problem which is connected with a turnout trouble, include in a point machine, occurrence at the time of train accident, and then proposed to the safety system model in order to prevent the train accident in turnout.