• 소음진동
• /
• 제11권2호
• /
• pp.354-364
• /
• 2001

The vibration induced by high speed train running on rail is dealt with as an environmental problem. The train induced vibration is characterized by moving loads at specific frequencies and soil conditions. In fact, it is predicted that the vibration sources are involved the wheel distance, number of cars, speed of operation, drift of rails, structural born vibration, etc. In this paper the characteristics of transferring vibration induced by the high-speed train in operation is discussed. Field measurements was conducted at region from Chungnam Yungj So-jung-myan to Chungbuk Chungwon hyun-do-myun. In the near future. these data will be used as the fundamental data for establishment of the countermeasure for vibrational reduction of high speed train using the results of the field measurements and quantitative prediction of the vibration level

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.224-229
• /
• 2004

In order to control the railway noise, the radiation characteristic of the noise when the train passes by should be analyzed. Generally, the major noise sources of the Korea Train Express are the rolling noise and power unit noise up to 300km/h. In this paper, a train model that is considered to be a row of point sourcesis introduced to analyze the radiation characteristic. The analysis results are compared with the measurement ones. It is shown that the propagation characteristic of the rolling noise is a dipole type and the noise generated by the power unit is radiated as a cosine type. With increasing of the train speed, the noise level at a receiving point is increased in the direction of motion and reduced in the direction opposite to the motion. The analysis results including the moving effect of the noise source at 300km/h show good agreement with the measurement results.

• 시스템엔지니어링학술지
• /
• 제5권1호
• /
• pp.43-48
• /
• 2009

Korean Tilting trains have been tested on conventional lines since the beginning of 2007 for evaluating its reliability. We achieved some major performance tests which are the maximum operation speed, 180km/h test and the maximum curves increasing speed, over 30 percentage comparing with non-tilling operation train. In order to analysis reliability data of tilting train, we have used the special system engineering frame with interfacing between component suppliers effectively. And also we have developed the data aquisition system which consists of monitor, sensors and depot computer etc. As a results of calculation, until now we realized that the reliability are getting more increasing than starting point of running field test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1220-1222
• /
• 2001

We proposed a modularization design technique for implementing software of on-board train control system. We already proved the efficiency of CASE Tool(SCADE) for safety critical software design. The several functions of train are implemented on CASE tool each modules. We divided functions of train into modules based on the modularization design. We used MATLAB for design of on-board train control software. We proved that this technique is more useful for the software design of on-board train control for EMU.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1226-1228
• /
• 2001

In this paper, the modified simulation algorithms of the Auto Transformer (AT) feeding electric train were proposed. To obtain terminal voltage of train by using equivalent circuit of the AT feeding system, the iterative method is proposed for which determine the train voltages. The train voltages are iteratively calculated from the system voltage drop and line impedance. In the case study, the proposed method is verified from actual operation data of the Kwa-Chon line. Also it is verified that the proposed method can be extent to the multi-train simulation tool. The terminal voltage of the multi-train can be calculated by using superposition principle and it is easily applied to the proposed method. Therefore, the proposed method can be a solution for the complexity of the circuit analysis in the existing methods.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.18-25
• /
• 1999

A high speed train named Korean High Speed Train (KHST) with its maximum operating speed 350 km/h is now under development. For the successful design of a quiet and comfortable high speed train, it is important to understand the general features of the noise and vibration characteristics of high speed train. This paper reviews extensively collected materials on the noise and vibration characteristics of existing high speed trains. Based on the noise and vibration characteristics of TGV systems, a simple indoor-noise prediction rule is proposed for the TGV-type high speed trains such as KHST The indoor-noise of KHST at 350km/h is expected to be larger than at least 71 dBA. Some important researches conducted for designing KHST during last two years under the G-7 project are also briefly introduced at the last part of this paper.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.145-150
• /
• 2006

In this study, overturning safety for a tilting train has been evaluated. In the tilting train, the overturning safety is one of the most important factors because the carbody inclines inward a curve during curve negotiation. Dynamic analysis considering unbalanced lateral acceleration and carbody tilting has been carried out and the overturning safety for the tilting train has been evaluated according to height of CG of carbody. From these studies, the overturning safety for the tilting train under unbalanced lateral acceleration of $2m/s^2$ was superior to the conventional one at the same running speed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.192-198
• /
• 2004

KTX is the high speed train which is designed for 300km/h in maximum operation speed. But its long train set may cause unstable characters as swaying of the tail of a train and when the train is running on conventional line not on the high speed line, its funning safety is a point to be considered cautiously. In this study, we evaluated the running safety by the numerical analysis using VAMPIRE and compared the result with the test result of KHST, which is being in performance tests, for verifying the validity of analysis results.

• Journal of Computational Design and Engineering
• /
• 제1권4호
• /
• pp.233-242
• /
• 2014

A magnetically levitated vehicle (Maglev) system is under commercialization as a new transportation system in Korea. The Maglev is operated by an unmanned automatic control system. Therefore, the plan of train operation should be carefully established and validated in advance. In general, when making a train operation plan, statistically predicted traffic data is used. However, a traffic wave often occurs in real train service, and demand-driven simulation technology is required to review a train operation plan and service quality considering traffic waves. We propose a method and model to simulate Maglev operation considering continuous demand changes. For this purpose, we employed a discrete event model that is suitable for modeling the behavior of railway passenger transportation. We modeled the system hierarchically using discrete event system specification (DEVS) formalism. In addition, through implementation and an experiment using the DEVSim++ simulation environment, we tested the feasibility of the proposed model. Our experimental results also verified that our demand-driven simulation technology can be used for a priori review of train operation plans and strategies.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.203-206
• /
• 2003

Using composite materials for the carbody of tilting train has many advantages such as manufacturing variety, specific high-strength ＆ stiffness characteristics, and long-life durability, but the strongest advantage could be the possibility of lightweight product. In the leading countries, the composite materials are used for the material fur drivers'cabs, interior/exterior equipments for railway train, and it is now developing the composite materials applied for the train carbody structure. In this paper, we conducted the evaluation of structural stability for the aluminum and composite carbody of the Korean Tilting Train express(TTX) with the service speed of 180km/h.