• Transactions of Materials Processing
• /
• v.18 no.1
• /
• pp.67-72
• /
• 2009

This paper covers finite element simulations to evaluate tube bending process of auto chassis component i.e. trailing-arm product. The rear of the auto chassis structure is primarily composed of CTBA and trailing-arm. When a car rolls into a corner, the trailing arm reacts to roll in the same degree as the car body. During the bending process of trailing arm the tube undergoes significant deformation. Thus forming defects such as excessive thinning and flattening of the tube will be formed in the outside of the tube. In this paper, we analyzed the effect of process parameters in rotary draw bending process and searched the optimized combination of process parameters using orthogonal arrays method to minimize the forming defects. In this process we analyzed several parameters which are displacement of pressure die, boosting force, initial position of mandrel bar, dimensions of mandrel in regarding to the thinning and flattening of the tube.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.167.2-167.2
• /
• 2005

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.133-138
• /
• 2017

Recently, CFRP composites are widely used as lightweight materials have with excellent mechanical properties and can beare widely used in various fields. In general, thermosetting resins are used for CFRP. However, in recent years, studies have been carried out using thermoplastic resins have been actively carried out to overcome the disadvantages of thermosetting resins. The LFT-D system is a molding method in which a fiber is directly cut to a the desired length while being impregnated with a thermoplastic resin to produce a compound and that is then press-molding molded to form the product. In this paper, before the production of the trailing arm, the compression molding analysis was carried out in order to grasp the problems that may occur during production. Through cCompression molding analysis was applied to calculate of the minimum press pressure and to compare and analysis analyze the molding conditions characteristic required to formfor forming the trailing arm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.847-850
• /
• 2005

In modern Automobile engineer, continuos development technology and improve on manufacture system are very important to the reinforcement of technology and improvement of productivity. In this study make a comparative welding methodology to make automotive trailing arm for change to welding system. A progress of test is durability test and banding fracture test for make collection of data about properties of welding system.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.67.1-67.1
• /
• 2021

We use Sloan Digital Sky Survey, Large Sky Area Multi-Object Fibre Spectroscopic Telescope, and Apache Point Observatory Galactic Evolution Experiment data to analyze the kinematic and chemical properties of stellar members in Sagittarius(Sgr) tidal streams. Using distances, positions, proper motions, and angular momenta of stars around the Sgr streams, we gather clean sample of Sgr member stars. We find that the leading arm has different chemical, kinematic, orbital characteristics from those of the trailing arm and the remnant of Sgr. In particular, the leading arm shows relatively lower eccentricity distribution than the trailing arm, suggesting their origin may differ or they have experienced different dynamical evolution, which is in somewhat mystery.

• Transactions of Materials Processing
• /
• v.23 no.5
• /
• pp.317-322
• /
• 2014

Bursting during tube hydroforming is preceded by localized necking. The retardation of the initiation of necking is a means to enhance hydroformability. Since high strain gradients occur at the necking sites, a decrease in local strain gradients is an effective way to retard the initiation of necking. In the current study, the expansion at potential necking sites was intentionally restricted in order to reduce the strain gradient at potential necking sites. From the strain distribution obtained from FEM, it is possible to determine strain concentrated zones, which are the potential necking sites. Prior to the hydroforming of a trailing arm, an incompressible material(such as lead) is attached to the tube where the strain-concentrated zone would contact the die. Due to the incompressibility of lead, the tube expansion is locally restricted, and the resultant strain extends to adjacent regions of the tube during hydroforming. After the first stage of hydroforming, the lead is removed from the tube, and the hydroforming continues to the final targeted shape without any local restriction. This method was successfully used to fabricate a complex shaped automotive trailing arm that had previously failed during traditional hydroforming fabrication.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.745-752
• /
• 2012

The pivot steering of an individual wheel motor drive vehicle is an effective steering maneuver in the narrow road, but it has become a matter of concern that the torque input of each wheel is very difficult to determine. In this study, the independent yaw moment control was proposed for the smooth pivot steering control of an in-wheel drive vehicle. For this control method, the vertical forces of tires were estimated from the trailing arm dynamic model, and the yaw moments of individual wheels were calculated from the vehicle dynamic model. Dynamic simulation results showed that the independent yaw moment control was much more effective on the minimization of the instabilities of pivot steering in comparison with the conventional direct yaw moment control with yaw rate feedback.

• Transactions of Materials Processing
• /
• v.15 no.2 s.83
• /
• pp.138-142
• /
• 2006

A tube hydroformability testing system was designed and manufactured to observe the forming steps and to provide arbitrary combination of internal pressure and axial fred. The forming limit diagram of an aluminum tube was obtained from the free bulge test and the T-shape forming test using this system, giving the criteria for predicting failure in the hydroforming process. The hydroformability of aluminum tube according to different conditions of a prebending process was discussed, based on the finite element analysis and the forming limit test. The effects of 2D and 3D pretending on the tube hydroforming process of an automotive trailing arm were evaluated and compared with each other.

• Journal of Applied Reliability
• /
• v.12 no.2
• /
• pp.79-90
• /
• 2012

The torsion beam type of rear suspension has been adopted by most manufactures of small to medium front wheel drive passenger cars. Previous studies analyzed only the load characteristics of CTBA(the coupled torsion beam axle)'s components. This paper analyzed the results of measurement after measuring loads and displacements, angles when a car equipped with the coupled torsion beam axle is driving in various roads. The most important durability factors for CTBA part are the force and direction of rear CTBA trailing arm. If there are design changes, it was difficult to make a sensor and install each time for measuring the trailing arm forces. After analyzing the loading histories between body and chassis, we developed the transformation matrix that can be converted to mutual force. This paper also deals with the analysis of the force behavior through the analysis of the influence and correlation between the body and chassis parts of cars.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.115.3-115
• /
• 2002

To improve the performance of the tracked vehicle system, we examined the feasibility of using the preview control for the tracked vehicles suspension system. We proposed a method to apply a linear optimal preview control to the tracked vehicle system. To avoid the complexity of modeling the track subsystem and kinematical nonlinearity in the trailing arm suspension, we classified these as unknown dynamics and disturbances. We used the Time Delay Control(TDC) method to make sprung mass dynamics follow that of linear preview controlled tracked vehicle model by compensating the uncertainties and disturbances. We have verified by the computer simulation that the proposed method shows good robus...