• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.510-517
• /
• 2012

This paper analyzes the performance of voice-over-Internet protocol (VoIP) services in terms of the system throughput, the packet delay, and the signaling overhead in a mobile WiMAX system with a hybrid automatic repeat request (HARQ) mechanism. Furthermore, a queueing analytical model is developed with due consideration of adaptive modulation and coding, the signaling overhead, and the retransmissions of erroneous packets. The arrival process is modeled as the sum of the arrival rate at the initial transmission queue and the retransmission queue, respectively. The service rate is calculated by taking the HARQ retransmissions into consideration. This paper also evaluates the performance of VoIP services in a mobile WiMAX system with and without persistent allocation; persistent allocation is a technique used to reduce the signaling overhead for connections with a periodic traffic pattern and a relatively fixed payload. As shown in the simulation results, the HARQ mechanism increases the system throughput as well as the signaling overhead and the packet delay.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2023

TCP is considered a major candidate transport protocol even for constrained IoT networks due to its ability to integrate into the existing network infrastructures. Since TCP implementations such as uIP TCP often allow only a single TCP segment per connection to be unacknowledged at any given time due to resource constraints, the congestion control relies only on RTO management. In our previous work, to address the problem that uIP TCP performs poorly particularly when a radio duty cycling mechanism is enabled and the hidden terminal problem is severe, we proposed a RTO scheme for uIP TCP and validated the performance through Cooja simulation. In this study, we investigate the effect of other factors that were not considered in our previous work. More specifically, the effect of traffic intensity, the degree of the hidden terminal problem, and RDC is investigated by varying the offered load and the transmission range, and the RDC channel check rate. Simulation results imply that we need to further investigate how to improve TCP performance when the radio duty cycling mechanism is used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1021-1033
• /
• 2008

In recent years, the growing interest in wireless sensor network has resulted in thousands of publications. Most of this research is concerned with delivering raw data such as temperature, pressure, or humidity. Recently, the focus of sensor network paradigm is changing for delivering multimedia contents. However, most existing routing protocols are not very practical for transmitting multimedia contents in resource constrained sensor networks. In this paper, we propose an optimized node-disjoint multi-path routing protocol for throughput enhancement and load balancing. We focused on how to allocate traffic to independent multiple end-to-end routes. Decentralized transmission using our node-disjoint multi-path routing scheme results in bandwidth aggregation and throughput enhancement. In addition, our scheme provides ways to remove link-joint routes for decreasing routing overhead.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.80-89
• /
• 2010

Most of the discussed power efficient routing algorithms, such as LEACH, PEDAP and etc., assume that a base station has infinite resources and there is no traffic limit. However, these assumptions cannot be applied to typical wireless sensor network environments, especially a small sensor network using a normal node as the base station. Moreover, many studies on the wireless sensor networks have not been considering the reverse transmission scheme which transmits data from a sink node to the normal nodes. We propose a bitarray-based reverse routing method which is a power efficient routing algorithm for the wireless sensor networks. The proposed method can be easily implemented by using the tree-based routing scheme and can be worked well with the small memory size for the address of sensor nodes. The experimental result shows that the amount of message transmission of the proposed bitarray-based reverse routing method can be reduced about 61.3% or more compared to the previous methods.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.275-280
• /
• 2010

In this paper, VoIP(Voice over Internet Protocol) transmission performance for MANET(Mobile Ad-hoc Networks) is improved and analyzed with packet aggregation scheme which is aggregating some of short length packets to one large packet and sending to networks. VoIP simulator based on NS(Network Simulator)-2 is implemented and used to measure performance of VoIP traffic transmission. In this simulation, VoIP traffics are generated with parameters of some codes such as G.711, G.729A, GSM.AMR and iBLC. MOS(Mean Opinion Score), end-to-end network delay, packet loss rate and transmission bandwidth are measured. Performance improvements of 98% for MOS, 6.4times for end-to-end network delay, 32times for packet loss rate is shown as simulation results. On the other hand, transmission bandwidth is increased about maximum 10%. Finally, VoIP implementation guide for the performance with packet aggregation is suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.593-603
• /
• 2000

In this paper, a dynamic route control scheme to increase speed of data communication over public network is presented. And a new structure of gateway which is suitable for the public network environments is proposed and analyzed. For dynamic allocation of transmission routing resources of the gateway and improvement of call processing ratio of the system, virtual queue is used. As results, route utilization ratio of the proposed scheme can be improved up to 60% as compared to the conventional fixed route control scheme. For the case of limited number of routes, it provides high speed data communication while maintaining delay time as low as possible. In addition, as the allocation period at call access node can be varied with the traffic in the proposed scheme, various traffics can be applied easily. Thus, it can be expected that the presented dynamic route control gateway may be suitable for application in high speed data communication over public network.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.196-201
• /
• 2013

In this paper, we propose an asynchronous and adaptive message passing scheme based on S-MAC for handling with the problem on energy efficiency in wireless sensor networks. The proposed scheme consists of a policy that differentiate transmission errors caused by packet collision or radio interference from congestion errors caused by buffer overflow and a method that adaptively controls the size of a fragment according to the variance of traffic loads. Especially, it presents a method that highly reduce the energy consumption by keeping the size of fragment not being excessively smaller than the one that may result in rapid increment of the total transfer time. Finally, with the simulation results we show that network throughput and delay are improved by using the proposed message passing scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.771-776
• /
• 2010

In this paper, we present an efficient centralized dynamic bandwidth allocation scheme with multicasting for asymmetric 10G-Ethernet Passive Optical Networks (10G-EPONs). The proposed scheme is based on multicast-burst polling and provides quality of service (QoS) with class of service (CoS) to different lasses of packets. It is shown that a well-known conventional interleaved polling scheme severely decreases downstream channel capacity for user traffic when the upstream network load is low (avalanche gate frequency). To overcome this problem, we have proposed a multicast burst polling scheme which shows impressively lower downstream bandwidth consumption compare to IPACT and moreover it did not show the light load penalty problem. Simulation results using an OPNET tool show that the multicast burst polling effectively eliminates light-load penalty and minimizes downstream bandwidth consumption under avalanche gate frequencies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.168-180
• /
• 2018

Due to the spread of mobile devices and the introduction of high-quality services, mobile traffic is expected to increase sharply and overload of cellular networks is expected. D2D communication is a way to reduce the load and evolve to 5th generation. Since D2D communication directly communicates between the terminals, it can reduce the overload of the cellular network and improve energy efficiency, data rate and network performance. This paper proposes a D2D handover scheme for D2D communication in cellular networks. The cellular network is a 3GPP EPS, and the proposed D2D handover method improves the existing EPS handover process considering compatibility between existing EPS and D2D communication. We also demonstrate the superiority of the proposed handover scheme using the network simulator ns-3. Simulation results show that the proposed handover scheme is superior to existing handover methods in terms of CUE variation, packet transmission delay time, and throughput.