• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.339-345
• /
• 2018

Sunrise and sunset times differ depending on location and date. Previous studies conveniently but monotonously applied day and night times set up. This research defined the daytime and nighttime while considering the time of twilight according to the date and the location of ship collision accidents. Classifying the frequency of ship collision accidents with this standard, we conducted a chi-squared test for the difference between daytime and nighttime. The frequencies of ship collision accidents according to daytime and nighttime was compared by season, month, and time, and all of them showed statistically significant differences. The highest number of daytime ship collisions was 11.6 %, in June, and nighttime collisions peaked at 13.7 %, in December. The most frequent hour for daytime ship collisions was 0700h-0800h, at 10.2 %, and nighttime collisions peaked between 0400h-0500h, at 16.9 %. It is clear that the criteria used in previous studies cited was applied without any theoretical basis and likely only for the convenience of the researchers. It was found that results depend on what criteria are applied to the same research data. This study shows that statistical analyses of marine accidents, traffic volume, and congestion density should be carried out quantitatively while considering daytime and nighttime hours for each particular location and date.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.463-482
• /
• 2016

Air Traffic Control (ATC) towers play significant role in the functionality of each airport. In spite of having complex dynamic behavior and major role in mitigating post-earthquake problems, less attention has been paid to the seismic performance of these structures. Herein, seismic response of an existing ATC tower with a wall-frame structural system that has been designed and detailed according to a local building code was evaluated through the framework of performance-based seismic design. Results of this study indicated that the linear static and dynamic analyses used for the design of this tower were incapable of providing a safety margin for the required seismic performance levels especially when the tower was subjected to strong ground motions. It was concluded that, for seismic design of ATC towers practice engineers should refer to a more sophisticated seismic design approach (e.g., performance-based seismic design) which accounts for inelastic behavior of structural components in order to comply with the higher seismic performance objectives of ATC towers.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.236-244
• /
• 2005

This study investigates the effects of the spatial elements of the mulit-purpose commercial complex on visitors' circulation pattern and wayfinding by employing method of space syntax, observation, and interview survey. Two commercial complexes were investigated; Techno-mart represented a vertical type and COEX mall rendered a horizontal one. Analysis of the spatial elements using space-syntax method provided a base line for comparing analyses by the two other methods. Analysis of the interview additionally survey identified the factors affecting wayfinding behavior and contributing satisfaction. The findings suggest that level of the effects of the spatial configuration on visitors' circulation pattern is greater in Techno-mart(vertically oriented) than COEX(horizontally). In COEX, for instance, specific route that connects sub-way station and cinema complex carries far more traffic than main route, even though the main route indicates higher degree of integration of spatial configuration. Similar with observation, the degree of integration is corresponding with the satisfaction and easiness of wayfinding behavior In COEX, specific place and feature seem to have more effects on visitors' wayfinding behavior and circulation pattern than the level of integration of spatial configuration.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.E
• /
• pp.67-73
• /
• 1990

Many distress mechanisms in pavement are known to be caused by the poor mechanical properties of bituminous concretes. Among many mechanical properties, tensile strength is one of the more important indicates that represent the resistance of pavement to traffic loading. However, there has been no relationship established between the strength and distress mechanisms. Therefore, this study was conducted to evaluate a correlation between the tensile strength value and the intensity of distress in bituminous concrete. Distress data were collected from an extensive field investigation over 77km of a four-lane highway in South Carolina, USA, and from laboratory prepared specimens in two phases of study. Strength data were obtained from a total of more than 400 field cores taken from the same highway and from 640marshall specimens of surface course mixture prepared in the laboratory. These data were analyzed using statistical test techniques. It was found from statistical analyses that the tensile strength of bituminous concrete had a strong relation with the pavement condition in the field. In the analysis of rutting and stripping, low strength concrete showed a higher distress rate in the mixture, and mixtures under distress in the field showed obviously reduced strength values. Stripping was found to be the most significant distress mechanism that was correlated with low strength bituminous concrete. Rutting appeared more frequently in a low strength pavement section of the highway as a sign of failure due to traffic loading.

• Journal of Environmental Science International
• /
• v.11 no.8
• /
• pp.801-810
• /
• 2002

The current paper describes the indoor/outdoor air quality in school environments through analyses of the heavy metal concentrations using Inductive Coupled Plasma(ICP). School environments in a heavy traffic area, two industrial areas, quasi-industrial area, and residential area were evaluated. The results were as follows: (1) The locations with the highest indoor and outdoor concentrations of heavy metals were the industrial areas followed by the heavy traffic area, residential area, and quasi-industrial area in a descending order of magnitude. Plus, the indoor heavy metal concentrations were higher then the outdoor ones. (2) The main heavy metal components were Zn, Al and Ca. Higher concentration levels were found indoors than outdoors. The heavy metal concentrations were also higher in the classrooms than in the corridor or outdoors. (3) The total heavy metal concentrations in the studied areas were highly dependent on the weather elements. including the relative humidity, mixing ratio, and wet-bulb depression. Accordingly, special ventilation systems are recommended to reduce air pollution in school environments.

• Land and Housing Review
• /
• v.2 no.3
• /
• pp.217-226
• /
• 2011

The Seoul Metropolitan Government is striving to minimize the amount of traffic according to the supply of apartment houses along with the solution of housing shortage for the low income people through high density development near the subway area. Therefore, a stronger policy is necessary to control the traffic of the passenger cars in a subway area for the successful high density development focusing on public transportation, and especially, the estimation of the demand of cars with high reliability is necessary to control the demand of parking such as the limited supply of parking lot. Accordingly, this study developed car ownership forecasting model using Look-up Table among category analyses which are easy to be applied and have high reliability. The estimation method using Look-up-Table is possible to be applied to both measurable and immeasurable types, easy to accumulate data, and features the flexible responding depending on the changes of conditions. This study established Look-up-Table model through the survey of geographical location, the scale of housing, the accessible distance to a subway station and to a bus station, the number of bus routes, and the number of car owned with data regarding 242 blocks in Seoul City as subjects.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.125-129
• /
• 2002

In the multimedia age, the development of Internet/Intranet circumstances makes Required Traffic per user be gradually larger. And the more demand getting many pieces of information quickly increases, the more required the rapid network is as a necessary consequence. This is why we need the advanced Ethernet. Gigabit Ethernet has many advantages in many respects. For example, it increases the capacity of network and makes network highly efficient in the existing Ethernet circumstance. Thus, Gigabit Ethernet becomes a counterproposal that can resolve Required Traffic per internet user. Present study inquires the concepts and the characteristics connected with Gigabit Ethernet Technology and analyses the Link efficiency with a hypothetical modeling.

• Computers and Concrete
• /
• v.13 no.4
• /
• pp.569-585
• /
• 2014

In this paper, a four-layer road structure consisting of an edge transverse crack is simulated using three-dimensional finite element method in order to capture the influence of a single-axle wheel load on the crack propagation through the asphalt concrete layer. Different positions of the vehicular load relative to the cracked area are considered in the analyses. Linear elastic fracture mechanics (LEFM) is used for investigating the effect of the traffic load on the behavior of a crack propagating within the asphalt concrete. The results obtained show that the crack front experiences all three modes of deformation i.e., mode I, mode II and mode III, and the corresponding stress intensity factors are highly affected by the crack geometry and the vehicle position. The results also show that for many loading situations, the contribution of shear deformation (due to mode II and mode III loading) is considerable.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.94-100
• /
• 2008

Noise barriers are being used more often to solve problems of noise pollution from traffic noise. Several types of noise barriers are being installed to increase the cost-effectiveness of noise barrier installation. In this study, the insertion loss is analyzed to evaluate the effectiveness of the noise barrier by using the BEM. In order to check the validity of the BEM, the BEM and Lam's theoretical analysis are compared with measurement, which is performed in the anechoic chamber for the 1/10 scale-down model, and good agreements are obtained. By using the two dimensional boundary element method, the insertion loss is calculated and analyzed for several typical noise barriers such as the vertical barrier, the barrier with an oblique edge on top, the T-shaped barrier and the barrier with interference device on top. With these analyses, it is possible to design more cost-effective noise barriers appropriate for a particular area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.59-66
• /
• 2006

This study was to construct the linear density predictive models on the on-ramp junctions in urban freeway. From the analyses of the real-time traffic characteristic data, and the construction and verification of the linear density predictive models, the models showed a considerable explanatory power with the determination coefficients ($R^2$) of over 0.7 between the density and speed data. Also, they showed a considerably high correlativeness with the correlation coefficients (r) of over 0.8 between the calculated density data and the expected ones estimated by the models.