• Wind and Structures
• /
• v.38 no.6
• /
• pp.411-425
• /
• 2024

To investigate the optimal aerodynamic parameters of wind barriers for the T-beam of high-speed railway (HSR) bridge and the wind field of the wind barrier-train-bridge system, the three-component forces of the system and the wind pressure on the vehicle surface were tested and analyzed through the sectional model wind test. The effects of wind velocity, with/without wind barrier, the height of wind barrier, and the air permeability of the wind barrier on the aerodynamic characteristics of the train-bridge system are discussed. Additionally, a CFD numerical model is constructed to evaluate the wind environment of the bridge surface with/without the wind barrier, and the impact of wind barrier on the running safety of vehicles are analyzed. Comprehensively considering the running safety of the train and the wind-resistant stability of the bridge, it is more appropriate to set the wind barrier height H as 3.5 m and the porosity 𝛽 as 30% respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.4
• /
• pp.27-37
• /
• 2010

Woven geotextiles (polyester mats) reinforcement is generally used to improve traffic ability, bearing capacity, and slope stability for embankment construction on soft ground. Cases of two high-strength woven geotextiles reinforcement layers are introduced in the present paper, which has been successfully constructed for rail road embankment on soft ground. According to the case results based on the limit equilibrium analyses of slope stability, the two high-strength woven geotextiles reinforcement layers on the soft ground can substantially increase the stability of the embankment by about 25%, improve the safety factor from 0.91 to 1.14, and significantly reduce the embankment construction duration at least 2 months. Therefore, the application of high-strength woven geotextiles is found to be useful for in-situ cases having the lack of construction duration and stability, as a soft ground improvement.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.13-27
• /
• 2011

This paper presents an investigation of the structural stability of cable-stayed bridges, using geometric nonlinear finite-element analysis and considering various geometric nonlinearities, such as the sag effect of the cables, the beam-column effect of the girder and mast, and the large displacement effect. In this analytic research, a nonlinear frame element and a nonlinear equivalent truss element were used to model the girder, mast, and cable member. The live-load cases that were considered in this research were assumed based on the traffic loads. To perform reasonable analytic research, initial shape analyses in the dead-load case were performed before live-load analysis. In this study, the geometric nonlinear responses of the cable-stayed bridges with different cable arrangement types were compared. After that, parametric studies on the characteristics of the structural stability in critical live-load cases were performed considering various geometric parameters, such as the cable arrangement type, the stiffness ratios of the girder and mast, the area of the cables, and the number of cables. Through this parametric study, the effect of geometric shapes on the structural stability of cable-stayed bridges was investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.54-63
• /
• 2018

In this study, the stability and economic feasibility of a MSE (Mechanically stability earth) wall with a pre-cast concrete pacing panel was investigated for a standard section of highway. Based on the design criteria, the MSE walls of the panel type were designed considering the load conditions of the highway, such as the dead load of the concrete pavement, traffic load, and impact load of the barrier. The length of the ribbed metal strip was arranged at 0.9H according to the height of the MSE walls. Because the length of the reinforcement was set to 0.9H according to the height of the MSE wall, the external stability governed by the shape of the reinforced soil was not affected by the height increase. The factor of safety (FOS) for the bearing capacity was decreased drastically due to the increase in self-weight according to the height of the MSE wall. As a result of examining the internal stability according to the cohesive gravity method, the FOS of pullout was increased and the FOS of fracture was decreased. As the height of the MSEW wall increases, the horizontal earth pressure acting as an active force and the vertical earth pressure acting as a resistance force are increased together, so that the FOS of the pullout is increased. Because the long-term allowable tensile force of the ribbed metal strip is constant, the FOS of the fracture is decreased by only an increase in the horizontal earth pressure according to the height. The panel type MSE wall was more economical than the block type at all heights. Compared to the concrete retaining wall, it has excellent economic efficiency at a height of 5.0 m or more.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1121-1126
• /
• 2017

Recently, the importance of smart gateways that link these with the big data and the development of the Internet of things is getting bigger. The smart gateway includes a network function such as a router and a router, and a sensor network function that links various objects such as a sensor. As the internet market has expanded, network stability and security problems have arisen and VPN technology has been proposed as one of the ways to solve these security problems. Efficient design is needed to implement VPN in low-end smart gateway and SOHO-level Internet environment with poor line quality. In this paper, we propose the concept and principle of VPN tunneling implementation and real - time traffic shaping method according to internet line condition in the Smart Gateway that supports IOT developed based on OpenWRT, the implementation and measured performance indicators are presented.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.186-195
• /
• 2017

Obtaining accurate visibility measurements is a common atmospheric optical problem, and of vital significance to civil aviation. To effectively evaluate and improve the accuracy of visibility measurements, an outdoor atmospheric simulation chamber with dimensions of $1.8{\times}1.6{\times}55.7m^3$ was constructed. The simulation chamber could provide a relatively homogeneous haze environment, in which the visibility varied from 10 km to 0.2 km over 5 hours. A baseline-changing visibility measurement system was constructed in the chamber. A mobile platform (receiver) was moved from 5 m to 45 m, stopping every 5 m, to measure and record the transmittance. The total least-squares method was used to fit the extinction coefficient. During the experiment conducted in the chamber, the unit weight variance was as low as $1.33{\times}10^{-4}$ under high-visibility conditions, and the coefficient of determination ($R^2$) was as high as 0.99 under low-visibility conditions, indicating high stability and accuracy of the system used to measure the extinction coefficients and strong consistency between repeated measurements. A Grimm portable aerosol spectrometer (PAS) was used to record the aerosol distribution, and then Mie theory was used to calculate the extinction coefficients. The theoretical results were found to be consistent with the measurements and exhibited a positive correlation, although they were higher than the measured values.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.203-209
• /
• 2014

Today, Distributed denial of service (DDoS) attack present a very serious threat to the stability of the internet. The DDoS attack, which is consuming all of the computing or communication resources necessary for the service, is known very difficult to protect. The DDoS attack usually transmits heavy traffic data to networks or servers and they cannot handle the normal service requests because of running out of resources. It is very hard to prevent the DDoS attack. Therefore, an intrusion detection system on large network is need to efficient real-time detection. In this paper, we propose the detection mechanism using analysis of flow information against DDoS attacks in order to guarantee the transmission of normal traffic and prevent the flood of abnormal traffic. The OPNET simulation results show that our ideas can provide enough services in DDoS attack.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.811-814
• /
• 2009

The HF band maritime communication is have developing to digital methode that techniques should be readied the automatic link establishment of 1:N by coast station to many ship station. Because can use way by polling simply that communication environment calls particular station wicked fellow HF communication states which is much redundancy times for coast station to set link. In amateur radio particular station selective calling do to be using ALE(Automatic Link Establishment) controller by 1:1 automatic link setting way, but expect 1:N link setting by these way in maritime communication very difficult. That is difficult to avoid collision by traffic overload to induce calling of ship stations. Because HF communication considers channel special quality traffic state radio link should be established, and should be applied automatically secures stability of channel as accommodative at traffic overload. In this paper is studied the new radio protocol by 3 step sequency driving of free access, group free access and polling access using multi-tone in single channel.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.75-85
• /
• 2019

The lateral load from traffic depends on standard truck's axle loads and locations, loading distance from the inner wall. The method of limit state design has been adopted and used for design of roads in the Republic of Korea since 2015. The concept of equivalent height of soil accounting for traffic loading is often used for design of retaining walls to quantify the traffic loads transmitted to the inner wall faces. Due to the different characteristics of the standard design trucks between Korea and US (AASHTO), the direct use of the guidelines from AASHTO LRFD leads to incorrect estimation of traffic load effects on retaining walls. This paper presents the results of evaluation of equivalent height of soil to reflect the standard truck of the nation, based on the findings from analytical solutions using 3D finite element method. Compare to US, the standard truck loading has a structure where the axle load is concentrated so that the equivalent load height is estimated to be slightly larger than AASHTO for lower retaining wall height. It would be reasonable to present the equivalent load height in Korea more conservatively than AASHTO in terms of securing long term stability of the retaining wall structure.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.73-82
• /
• 2017

In this research, we tried to check the applicability of a Chow test to the linear models which are generated in the process of transportation planning or traffic flow analyses. The Chow test is a very popular statistical method which is being used to see if the coefficients from two separate linear regression models are equal or not. In order to prove the effectiveness of the Chow test, we found the linear relationships between speed and density under the situations such as driving in daytime and in nighttime on a rainy day. Based on the two months of Joong-Bu Expressway traffic data, we proved that the Chow test is useful to testify the similarity between two linear regression models. And this statistical tool seems to be able to have a very important role in traffic flow analysis or in transportation planning process. Finally, we expect the Chow test be implemented even to the non-linear regression models or to the multi-variate models.