• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.83-93
• /
• 2006

The purpose of this study is to analyze the relationship among subjective textures, sensibilities and objective handle of knit fabrics and to provide useful information in planning and designing knit fabrics. We made 20 plain knit fabrics, as specimens, with a combination of 5 kinds of wool/rayon fiber contents and 4 kinds of stitch loop length. For the subjective evaluation, we used 29 questions of subjective textures and sensibilities and employed statistical analysis tools such as factor, Pearson's correlation analysis. An objective handle was measured by Kawabata evaluation system and HV and THV was calculated by KN-402-KT and KN-301-winter. The analysis of a Pearson's correlation with objective properties and handles and structural properties of knit fabrics demonstrated a highly linear relationship. Especially, wool/rayon contents and WT of tensile properties and loop stitch length and G of shear properties showed a correlation coefficient over 0.9. But a relationship of objective properties and subjective textures and sensibilities was non-linear and a linear multi-regression analysis showed that a objective handle had a lower prediction power in the area of subjective textures and sensibilities.

• The Korean Journal of Health Service Management
• /
• v.8 no.2
• /
• pp.11-22
• /
• 2014

This study purposed to analyze the regional variation of the local-out rates of inpatient services. Multiple data sources collected from National Health Insurance Corporation and statistics Korea were merged to produce the analysis data set. The unit of analysis in this study was city, Gun, Gu, and all of them were included in analysis. The dependent variable measured the local-out rate of inpatient cost in study regions. Local environments were measured by variables in three dimensions: provider factors, socio-demographic factors, and health status. Along with the traditional ordinary least square (OLS) based regression model, geographically weighted regression (GWR) model were applied to test their effects. SPSS v21 and ArcMap v10.2 were applied for the statistical analysis. Results from OLS regression showed that most variables had significant relationships with the local-out rate of inpatient services. However, some variables had shown diverse directions in regression coefficients depending on regions in GWR. This implied that the study variables might not have consistent effects and they may varied depending the locations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5643-5656
• /
• 2016

The detection accuracy of steganalysis depends on many factors, including the embedding algorithm, the payload size, the steganalysis feature space and the properties of the cover source. In practice, the cover source mismatch (CSM) problem has been recognized as the single most important factor negatively affecting the performance. To address this problem, we propose a new framework for blind, universal steganalysis which uses traditional steganalyst features. Firstly, cover images with the same statistical properties are searched from a reference image database as aided samples. The test image and its aided samples form a whole test set. Then, by assuming that most of the aided samples are innocent, we conduct outlier detection on the test set to judge the test image as cover or stego. In this way, the framework has removed the need for training. Hence, it does not suffer from cover source mismatch. Because it performs anomaly detection rather than classification, this method is totally unsupervised. The results in our study show that this framework works superior than one-class support vector machine and the outlier detector without considering the image retrieval process.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.203-212
• /
• 2006

The purpose of this study was to examine the effects of the structural properties of plain knit fabrics on the subjective perception of textures, sensibilities, and preference among consumers. This study, then, aimed to provide useful information with respect to planning and designing knitted fabrics by predicting the subjective characteristics analyzed according to their structural properties. For this purpose, we employed statistical analysis tools, such as factor and regression analysis and an adaptive-network-based fuzzy inference system(ANFIS), thereby combining the merits of fuzzy and neural networks and presupposing a non-linear relationship. Through factor analysis, we also categorized the subjective textures into 'roughness', 'softness', 'bulkiness' and 'stretch-ability' with R2=70.32%: and categorized the sensibilities into 'Stable/Neat', 'Natural/Comfortable' and 'Feminine/Elegant' with R2=68.12%. We analyzed subjective textures, sensibilities, and preference with ANFIS, assuming non-linear relationships; consequently, we were able to generate three or four fuzzy rules using wool/rayon fiber content and loop length as input data. The textures of roughness and softness exhibited a linear relationship, but other subjective characteristics demonstrated a non-linear input-output relationship. Compared with linear regression analysis, the ANFIS exhibited had higher predictive power with respect to predicting subjective characteristics.

• Culinary science and hospitality research
• /
• v.14 no.2
• /
• pp.115-127
• /
• 2008

The purpose of this study is to validate the evaluation of stock, which has relation with self-esteem and career for the development of commercial stock. This study conducted a survey of purchasing attitudes & receptiveness in order to hold an accurate course for developing stock. According to the analysis, the results are as follows. It examined the cuisiniers of deluxe hotels who mainly use stock of Seoul and the capital region. A total of 350 samples were distributed and 289 samples were selected for the research. Statistical analysis of collected data executed frequency, percentage, average, reliability analysis, factor analysis using SPSSWIN 12.0 PC package programs. Making stock, cooking skills, cooking methods, quality of food ingredients and cooking recipes are important. Also, sensory characteristics such as color, odor, and taste should be considered. Career and self-esteem act on the purchase accommodation attitude of commercial stock. Commercial stock products more than 1,000 mL or 2,000 mL of liquid styles need packing of vacuum pack(vinyl). Based on the result of this study, we will make efficient use of research data for the development of commercial stock products and we will be able to improve conservation of taste with good quality by making by hand through standardization and mass production of traditional culinary skills.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.425-431
• /
• 2001

In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. In this study, safety of structures will estimated by the reliability analysis with commercial structural software that has the tools of nonlinear elastic-plastic 3-D analysis. Experimental test result is compared to results from this research and Coan/sup 1)/ In this paper, AFOSM(Advanced First-Order Second Moment method) is applied with von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index β and probability of failure P/sub f/ can be obtained by following this practical procedure as judgement a safety of structures and necessity of reinforcing.

• The Research Journal of the Costume Culture
• /
• v.8 no.1
• /
• pp.40-52
• /
• 2000

The purposes o this study were to investigate buying behaviors of patrons of six retail store types for clothing and the satisfaction levels of the six store types (department stores, specialty stores, chain store, discount stores, bonded goods stores and traditional market), and to test the differences in purchase behaviors and store satisfaction levels among the groups determined by demographic characteristics. A questionnaire survey was administered to male and female university students living in the Seoul metropolitan area from April 27 to May 11, 1999 ; 443 were collected and 391 were used for the data analysis. Data were analyzed by SPSS statistical package. Descriptive statistics, t-test, ANOVA, Chi-square analysis and Duncan's multiple range test were employed for the data analysis. In terms of the store usage, most of the subjects tended to choose the store types they patronized for buying coats, suits, blouses, T-shirts, slacks/skirts and jeans items ; but, they used department store and specialty store for coat, suit, blouse, T-shirt, slacks/skirt and jeans for purchasing selected clothing items. Regarding criteria used for store selection, the most important criterion was the diversity of products offered and other store types. In terms of the store satisfaction levels of the six store types, the patrons of all store types were most satisfied with the stores they patronaged.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.368-377
• /
• 2018

In this paper, we evaluate cryptographic properties of a double random phase encoding (DRPE) scheme in the discrete Gyrator domain with avalanche and bit independence criterions. DRPE in the discrete Gyrator domain is reported to have higher security than traditional DRPE in the Fourier domain because the rotation angle involved in the Gyrator transform is viewed as additional secret keys. However, our numerical experimental results demonstrate that the DRPE in the discrete Gyrator domain has an excellent bit independence feature but does not possess a good avalanche effect property and hence needs to be improved to satisfy with acceptable avalanche effect that would be robust against statistical-based cryptanalysis. We compare our results with the avalanche and bit independence criterion (BIC) performances of the conventional DRPE scheme, and improve the avalanche effect of DRPE in the discrete Gyrator domain by integrating a photon counting imaging technique. Although the Gyrator transform-based image cryptosystem has been studied, to the best of our knowledge, this is the first report on a cryptographic evaluation of discrete Gyrator transform with avalanche and bit independence criterions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.102-109
• /
• 2001

In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. Thus, the computer program by the Probabilistic FEM is developed by incorporating the probabilistic concept into the conventional FEM method. This paper estimated for the reliability of a plane stress structure by Advanced First-Order Second Moment method using von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index and failure probability of attained by the Monte Carlo Simulation method with the von Mises criterion were same as PFEM, but the Monte Carlo Simulation were very time-consuming. The variance of member thickness and load could influence the reliability and failure probability most sensitively among the design variables from the results of the parameter analysis. And proper failure criterion must be used to design safely.

• Journal of Information Science Theory and Practice
• /
• v.2 no.4
• /
• pp.61-76
• /
• 2014

The exponential growth of information on the web far exceeds the capacity of present day information retrieval systems and search engines, making information integration on the web difficult. In order to overcome this, semantic web technologies were proposed by the World Wide Web Consortium (W3C) to achieve a higher degree of automation and precision in information retrieval systems. Semantic web, with its promise to deliver machine understanding to the traditional web, has attracted a significant amount of research from academia as well as from industries. Semantic web is an extension of the current web in which data can be shared and reused across the internet. RDF and ontology are two essential components of the semantic web architecture which support a common framework for data storage and representation of data semantics, respectively. Ontologies being the backbone of semantic web applications, it is more relevant to study various approaches in their application, usage, and integration into web services. In this article, an effort has been made to review the research work being undertaken in the area of design and development of ontology supported information systems. This paper also briefly explains the emerging semantic web technologies and standards.