• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.451-458
• /
• 2020

In this study, a trade-off analysis of a power conversion system (PCS) is performed in accordance with a power semiconductor device to establish the suitable operating frequency range for the anyplace induction heating system. A resonant network is designed under each operating frequency condition to compare and analyze the PCS losses depending on the power semiconductor device. On the basis of the simulation results, the PCS losses and frequency condition are calculated. The calculated results are then used for a trade-off analysis between Si-MOSFET and GaN-HEMT based on PCS. The suitable operating frequency range is determined, and the validity of the analysis results is verified by the experiment results.

• Korea Trade Review
• /
• v.42 no.3
• /
• pp.25-47
• /
• 2017

Forfaiting is a trade finance facility whereby financial institution purchases accounts receivable from exporters, on a without recourse basis. After the adoption of K-IFRS in 2011, accounting for simple borrowing as usual negotiation increases debt ratio which in turn, worsens financial soundness of a company. Hence, exporting companies have their interest in forfaiting that enables book-off in order to decrease the borrowing. Along with the execution of URF 800 at ICC and increasing the interest of exporting companies into forfaiting, foreign exchange banks in Korea expand the development of products related to forfaiting. Upon surveying all these national banks of this matter, this paper identified an appropriate solution for the forfaiting practice.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2006

Hot carrier degradation and roll off characteristics of threshold voltage ($V_{t1}$) on NMOSFETs as I/O transistor are studied as a function of Lightly Doped Drain (LDD) structures. Pocket dose and the combination of Phosphorus (P) and Arsenic (As) dose are applied to control $V_{t1}$ roll off down to the $10\%$ gate length margin. It was seen that the relationship between $V_{t1}$ roll off characteristic and substrate current depends on P dopant dose. For the first time, we found that the n-p-n transistor triggering voltage ($V_{t1}$) depends on drain current, and both $I_{t2}$ and snapback holding voltage ($V_{sp}$) depend on the substrate current by characterization with a transmission line pulse generator. Also it was found that the improved lifetime for hot carrier stress could be obtained by controlling the P dose as loosing the $V_{t1}$ roll off margin. This study suggests that the trade-off characteristic between gate length margin and channel hot carrier (CHC) lifetime in NMOSFETs should be determined by considering Electrostatic Discharge (ESD) characteristic.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.50-55
• /
• 2020

This study investigates the injection molding of a plastic rack gear and focuses on deflections in the part. The causes of deflections were found and resolved through a trade-off study by injection molding analysis. Based on a warpage analysis, the fiber orientation was found to be a dominant factor in the occurrence of deflections. Changes in the part design and various injection conditions were analyzed for their effects in reducing deflections. Based on the trade-off study, a new part bottom design, injection time, and melt temperature were recommended. A trial injection was done for the new plastic rack gear, and measurements showed that its flatness surpassed that of the original part and met the specified requirement. The short injection time, low melt temperature, and symmetric similar configuration of the part contributed to the reduction in deflections. Therefore, optimized gate design and injection conditions as well as a new part design were validated through injection molding analysis in this study.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.2
• /
• pp.9-20
• /
• 2020

The study investigates a recent surge of cash literature by using a sample of hospitality firms to gain a new understanding of corporate cash holdings. Past literature states that there is a substantial variation of liquidity across industry groups. Existing literature predominantly refers to US-listed firms and focus on either hotels or restaurants and not the hospitality industry as a whole. Therefore, we provide a comparative study of cash holdings behaviour between hospitality and non-hospitality firms from an emerging market context. Using a sample of public listed hospitality firms from 2002 to 2013, dynamic panel regression techniques are used to study the relationships between firm characteristics and cash levels. Also, the non-parametric Wilcoxon-Mann-Whitney test was carried out to examine the time and sectoral differences in cash holdings. In addition, the panel regression techniques are used to investigate the relationships between firm characteristics and level of corporate cash holdings. The results reveal that firm characteristics do matter in hospitality firms. We find that firm size, capital expenditures, and liquid assets substitutes are negatively related to cash level. The results support trade-off theory and the pecking order theory. This study incrementally explains the cash holdings behaviour of hospitality firms in emerging market.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.5
• /
• pp.365-376
• /
• 2022

This study aims to look into the causal relationships between corporate social responsibility and firm value, corporate social responsibility and institutional ownership, and firm value and institutional ownership. This study develops a triangle model of causal relationships among the three endogenous variables. Samples for this study are manufacturing companies listed on the Indonesia Stock Exchange for the period 2014-2018. The model is operated in the system of simultaneous equation models using the generalized method of moments technique to estimate parameter coefficients. After controlling the effects of trade-off/balancing capital structure and managerial ownership, the research findings show a positive causal relationship between CSR and firm value and firm value and institutional ownership. Institutional ownership has a positive effect on CSR, while the effect of CSR on institutional ownership is negative in the firms without managerial ownership and positive in the firms with managerial ownership. This study finds that the causal relationship between CSR and firm value is stronger after the trade-off/balancing of capital structure is included in the model. Capital structure has a convex effect on firm value and positively impacts institutional ownership. In addition, an independent commissioner has a negative impact on CSR but has no direct impact on firm value.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1199-1206
• /
• 2015

In this study, the exhaust gas of a diesel engine operating on biodiesel(BD) fuel(a mixture of diesel and soybean oil) was investigated for different fuel mixing ratios in the range of BD3 to BD100. The experiments were conducted using injection pressures of 400, 600, 800, 1000, and 1200 bar. The Pearson correlation coefficient and Spearman rank-order correlation coefficient were used to quantify the NOx and Soot emissions based on the fuel mixing ratio and injection pressure. Consequently, the Pearson correlation coefficient obtained for NOx and Soot emissions according to the mixing ratio and injection pressure was -0.811 and the corresponding Spearman rank-order correlation coefficient was -0.884, which indicated that the correlation of the NOx and Soot emissions was linear. Thus, the NOx and Soot have a trade-off relationship. Moreover, at each injection pressure, the Pearson correlation coefficient was a negative number, which indicated an inversely proportional relationship between NOx and Soot.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.33-40
• /
• 1996

In this paper, we resolved a trade-off problem of the blind equalizer based on the stop-and-go algorithm that is commonly used for QAM demodulation in CATV receiver. The stop-and-go algorithm has used the LMS(least mean square) algorithm in the updating operation of tap weights so that the structure of equalizer is simple, but there is a trade-off between convergence speed and steady state error as in the typical LMS algorithm. We used the variable step size algrithm to improve the convergence speed with the steady state error in the constant level. With respect to the same level of the steady state error, the variable step size stop-and-go algortihm improved convergence speed by about $36%{\sim}56%$ as compared with that of the constant step size algortihm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.190-193
• /
• 2010

Various power semiconductor devices have been developed and evolved since 1950s. Among them, IGBT is the most developed power semiconductor device which has high breakdown voltage, high current conduction and suitable switching speed which perform trade-offs between each other. In other words, there are trade-offs between a breakdown voltage and on-state voltage drop, and between on-state voltage drop and turn-off time. In this paper, the new structure is proposed to improve a trade-off between a breakdown voltage and on-state voltage drop. The proposed structure has a trench collector and this trench collector induces an accumulation layer at the bottom of an n-drift region during off-state. And this accumulation layer prevents expansion of depletion layer so that trapezoidal electric field distribution is performed in the n-drift region. As a result of this, breakdown voltage is increased without increasing on-state voltage drop. The electrical characteristics of the proposed IGBT is analyzed and optimized by using representative device simulator, TSUPREM4 and MEDICI. After optimization, the electrical characteristics of the proposed IGBT is compared with NPT IGBT which have the same device thickness. As a result of this, it can be confirmed that the proposed structure increases the breakdown voltage of 800 V than that of the conventional NPT IGBT without increasing the on-state voltage drop.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.4
• /
• pp.43-61
• /
• 2017

The wetlands are facing environmental changes such as desiccation that occurs with the passage of time and reduced ecosystem services from wetlands in the city. In order to maintain the ecosystem services provided by wetlands in urban areas, a system thinking about the trade-off phenomenon of ecosystem services occurring as the wetlands undergo environmental changes is needed. Therefore, the purpose of this study is to develop strategies for wetland design using system thinking approach to enhance the resilience of ecosystem services degraded by the desiccation of wetlands and other disturbances. The objectives of this study include the system boundary and variables. Second, analyzing the dynamics of wetland design strategy. Third, it analyzes the trade-off phenomenon of ecosystem services in terms of the hydrology, hydric soil, and plants strategies to mitigate these effects. Fourth, wetland basic design to improve the resilience of ecosystem services. A wetland in Abuk-Mountain Neighborhood Park, Miryang-si, Gyeongsangnam-do, has been selected as a case study. Causal loop diagrams(CLDs) are used to analyze feedback in the wetland regime. In summary, hydrology, hydric soil, and plants is suggested as system boundaries to design plan. Design strategies for the wetland focused on robustness, redundancy, rapidity, and resourcefulness as a result of CLD analysis are first proposed in order to effectively maintain the wetland regime over the long term. Secondly, in a section related to hydrology, the CLD results show the trade-offs between provisioning-cultural services and regulating services. In order to control these services, a "water cycling system" has been implemented due to its strength in terms of robustness. The CLDs for hydric soil showed the trade-offs between regulating services and supporting services. An "installation of storm drainage for maintaining water levels" was selected due to the strength offered in terms of redundancy and rapidity. The CLDs for plants showed the trade-offs between provisioning - cultural services and regulating services. In order to control the strategic points, the "planting of indigenous vegetation" was suggested given the strength in terms of redundancy. In this study, a wetland design method is proposed that can improve the resilience of wetland ecosystem services by analyzing the dynamics overtime. The results of this research can theoretically be applied to help restore ecosystem services in wetlands using ecological landscape design. In addition, this study will contribute to reducing maintenance costs by improving wetland resilience.