• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.38-60
• /
• 1999

The main objective of this study is systemization of the technique of ROC quantification and optimization of baseline design by applying CE principle to the acquisition process of a weapon system. QFD and TOA techniques can be employed to a good working example of the conceptual design of a future main battle tank. In this paper, Product Planning Phase, the first phase of four QFD phases, is deployed in terms of eight steps including customer requirements and final product control characteristics. TOA is carried out considering only combat weight. In order to perform combat weight analysis and performance TOA, Preliminary Configuration Synthesis Methodology is used. Preliminary Configuration Synthesis Methodology employs the method of least squares and described linear equations of weight interrelation equation for each component of tank. As a result of QFD based upon the ROC, it was cleared that armor piercing power, main armament, type of ammunition, cruising range, combat weight, armor protection, power loading, threat detection and cost are primary factors influencing design and that combat weight is the most dominant one. The results of TOA based on the combat weight constraint show that 5100 lb reduction was required to satisfy the ROC. The baseline design of a future main battle tank is illustrated with assumption that all phases of QFD are employed to development and production process of subsystems, components, and parts of main battle tank. TOA is applied in iterative process between initial baseline design and ROC. The detailed design of each component is illustrated for a future main battle tank.

• Journal of Advanced Navigation Technology
• /
• v.2 no.2
• /
• pp.143-156
• /
• 1998

Incheon International Airport(IIA) is planned to open in about two years. Korean government has an ambition to make IIA a major hub airport in Northeast Asia. The most essential and required condition for an airport to be a successful hub airport in a certain region is to have more efficient flight service network than the other airports in the same region. IIA should compete with Japanese airports to be a major hub in Northeast Asia because Japanese government also has a plan to expand greatly the airport capacity in Tokyo area and Kansai airport in Osaka. It is necessary for both IIA and Korean national air carriers to compose efficient flight service network considering hub competition with Japanese major airports. As the liberalization of international air transport industry would give more marketing freedom to airlines, they would plan the flight service network and flight schedule based on market analysis instead of governmental regulations. In the economically liberalized environment, it is very required to analyze air passengers' flight choice behaviour in order to induce other carriers and passengers through IIA's attractive flight service network. Disaggregate model is more appropriate than aggregate model to analyze consumers' behaviour. The information derived from disaggregate choice model of air passengers could be utilized in devising efficient flight network and schedule plan. Value of travel time or trade off ratio between flight frequency and travel time which could be estimated from discrete choice model could be utilized for scheduling an efficient flight plan for airlines and composing efficient flight service network for IIA.

• Journal of KIISE
• /
• v.44 no.12
• /
• pp.1313-1318
• /
• 2017

Aggregating local features in a single vector is a fundamental problem in an image search. In this process, the image search process can be speeded up if binary features which are extracted almost two order of magnitude faster than gradient-based features are utilized. However, in order to utilize the binary features in an image search, it is necessary to study the techniques for clustering binary features to generate binary visual words. This investigation is necessary because traditional clustering techniques for gradient-based features are not compatible with binary features. To this end, this paper studies the techniques for clustering binary features for the purpose of generating binary visual words. Through experiments, we analyze the trade-off between the accuracy and computational efficiency of an image search using binary features, and we then compare the proposed techniques. This research is expected to be applied to mobile applications, real-time applications, and web scale applications that require a fast image search.

• Korea Journal of Hospital Management
• /
• v.13 no.3
• /
• pp.69-93
• /
• 2008

Rising healthcare cost is a global phenomenon that justifies governments' introduction of 'incentive regulation' plan for the improvement of hospital efficiency. A number of previous studies tried to evaluate the efficiency of healthcare organization by using Data Envelopment Analysis(DEA), a common efficiency benchmarking method. However, there is a concern that this kind of efficiency evaluation could induce "quantity-quality trade-off". Moreover, as quality aspect is especially important in terms of 'effectiveness' of health care, it should be considered in efficiency evaluation of healthcare organization. A number of different models were tried so far to incorporate quality aspect into DEA, however, none is universally recognized as a standard. Thus, in this study, previous quality-incorporating DEA models were categorized into 6 types according to the way of incorporating quality aspect, and strengths and limitations of each type were reviewed with a set of artificial data as an example. Based on this review, a new quality-incorporating efficiency evaluation model, named Quality-adjusted output DEA(QAO-DEA), was suggested. As an exploratory empirical analysis, technical efficiency of human resource were measured with different quality-incorporating DEA models, using 2004 data from National University Hospitals. In conclusion, Quality-adjusted output DEA(QAO-DEA) model seems to be one of the most desirable alternatives to incorporate quality aspect in efficiency evaluation of hospital, and deserves the consideration as a policy tool to induce simultaneous improvement of both efficiency and quality.

• Journal of the Korean Geographical Society
• /
• v.36 no.4
• /
• pp.434-443
• /
• 2001

Differing from the existing method to optimize the statistical proximity, the new optimization method was developed to maximize the spatial proximity among the unit areas of choropleth map. 25 choropleth maps were made using 5 classification methods(maximum BEI, maximum TEI, equal interval, natural break, n-tile) for 5 classes(3∼7) and were analyzed to elucidate the effectiveness of classification methods on the basis of 3 evaluation indeces (TEI, BEI, $C_{F}$). The results from the maximum TEI and maximum BEI were evaluated as relatively stable and effective compared to those from other classification methods. But they showed the opposite trends owing to the trade-off relationships. Meanwhile, the resets from the natural break method got higher marks, which was also identified through the analysis using a new $alpha$-index.x.

• Composites Research
• /
• v.25 no.2
• /
• pp.54-61
• /
• 2012

In this study, a specific structural design procedure for 2 MW class glass/epoxy composite wind turbine system towers is newly proposed through load case study, trade-off study, optimal structural design and structural analysis. Optimal tower design is very important because its cost is about 20% of the wind turbine system's cost. In the structural design of the tower, three kinds of loads such as wind load, blades, nacelle and tower weight and blade aerodynamic drag load should be considered. Initial structural design is carried out using the netting rule and the rule of mixture. Then the structural safety and stability are confirmed using a commercial finite element code, MSC NASTRAN/PATRAN. The finally proposed tower configuration meets the tower design requirements.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.83-88
• /
• 2020

This paper proposes a method of applying an advanced preamble detection technology to wireless sensor nodes and analyzes the trade-off relationship between throughput and fairness that may occur when sensor nodes equipped with the MIM function compete with the legacy IEEE 802.15.4 sensors. Sensor nodes employing the MIM capability have more chances of concurrent transmissions than the legacy IEEE 802.15.4-based sensor nodes, resulting in gains in terms of throughput, whereas the transmission opportunities of 802.15.4 sensor nodes might be limited due to the additional simultaneous transmissions of the MIM sensor nodes. The extensive evaluation results performed under a test environment built using Python program with reflecting the setting value of a commercial sensor node shows MIM sensor nodes outperform up to 40% over the legacy 802.11 sensors. Meanwhile, it was confirmed that a balance can be achieved in terms of throughput and fairness by properly adjusting the concurrent transmission threshold.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.393-402
• /
• 2007

The purpose of this study is to provide the design direction based on consumer sensitivity through the structure between product design preferences - sensitivity image - design elements. For the purpose, we selected men's shaver products for this study subject and collected 164 shavers' pictures released between 2001-2007 years. Then, we carried out a pilot test for collection of sensitivity images about shavers, made a survey using semantic differential method and analyzed the survey. According the result, consumers preferred the sensitivity images "luxury, attractive, stable", design elements satisfied the preference images were "form of body is not a circular arcs or a polygon, material is steel, button is push style, and a color of body is not brown." This study can provide a base of the causal relationship between design preferences - sensitivity image - design elements and a design process to predict consumer sensitivity-oriented design.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.183-193
• /
• 2007

Traditionally, a congestion charge based on first-best congestion pricing theory, namely, the theory of marginal cost pricing theory, is equal to the difference between marginal social cost and marginal private cost. It is charged on each link so as to derive a user equilibrium flow pattern to a system optimal one. Based on this theory this paper investigates on the characteristics of first-best congestion pricing of multiple user class on road with variable demand, and presents two methods for analysis of social and spatial equity. For these purposes, we study on the characteristics of first-best congestion pricing derived from system optimal in time and in monetary unit, and analyze equity from this congestion pricing with an example network.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.293-309
• /
• 1998

This study is aimed at identifying the decision making criteria as B/C ratio, IRR and NPV based on the expected benefits and costs of the land utilization and promotion projects which have implemented to improve agricultural structure under WTO system. To carry out the objectives of the study, Sinseok project area located at Dangjin district, Chungnam province was selected. Sinseok project area has 306.2 ha of paddy area with 172 farm households. The project area will be operated by the 33 specialized farm households after completion of the project which will have 20 years of economic life. After completion of the project, farm size will be increased from 1.8ha to 9.3ha. Land intensity of the project area will be increased by 10%. Increase of land productivity and cost saving due to the labor saving technology as farm mechanization will be expected. According to the survey results, the annual amount of production cost savings per farm was estimated 3.884million won and increased total farm income was expected about 43.8million won per year. The total expexted project benefits was expected 174million won per year. The project costs to promote land utilization and structural change consisted of handling charges, and direct payment for land movility. The decision making criteria representing economic feasibility of the project such as B/C ratio, NPV and IRR were estimated 2.49, 483million won and 30% respectively when the cut-off rate was taken into account 10%. In conclusion, the land utilization and promotion project proppeled by the Korean Government under the agricultural land law is considered economically feasible from the view points of expected project benefits and costs. Accordingly the project have to be implemented more strongly under the G't financial support considering WTO and UR negociation which were aimed at achieving the free trade and improvement of international competitiveness of farm products.