Purpose: Many tractors have adopted the horizontal control system designed to maintain the three-point mounted implements in horizontal position when they are tilted sideways. The control system rotates the implement in the opposite direction to the inclination of rear axle of the tractor. However, the current control system was found to have poor performance in accuracy and response. A new control system was therefore developed to improve the performance. Methods: The new control system was designed to get the response of the implement to be started earlier by using the tilt information from the front axle of the tractor. By this approach, the rotation of the implement can be adjusted as required to make it horizontal at the expected time, even though the response is slow. The optimal values of the control parameters for the new system were determined by computer simulation and validated by a performance test conducted with an obstacle of 120 mm height on a flat concrete surface. The performance of the control system was evaluated by the root mean square error (RMSE) of the rotation angle of the implement with respect to the actual inclination of the rear axle. Results: The new control system reduced the RMSE of the current control system by 44.6% indicating a high performance improvement. The inclination of the front axle was easily obtained from a sensor mounted on the front axle of the tractor and used as input to the new control system. Conclusions: The method of getting the response of the implement to be started earlier by utilizing the inclination information of the front axle can be applied to improve the performance of the current control system at least cost.
This study was conducted to investigate the effects of axle weight distribution and inflation pressure of tire on the fuel economy of tractors as well as operational range of tractor engine in terms of engine speed and power when a 4WD tractor of 38.2 kW rated power at 2500 rpm is used for plowing and flooded-field rotavating in paddy fields. (1) Plowing operation required an average engine power of 9.6~13.5 kW which equals 25~35% of rated PTO power. Engine speed ranged from 1,320.4 to 1,737.4 rpm, work velocity from 3.4 to 4.8 km/h, and fuel consumption from 3.2 to 4.2 L/h, respectively. (2) Flooded-field rotavating required an average engine power of 11.5~18.5 kW which equals 30~48.4% of rated PTO power. Out of this 6.2~12.2 kW was used for PTO power. Engine speed ranged from 1,557 to 2,067 rpm, work velocity from 2.5~5.4 km/h and fuel consumption from 3.2~5.5 L/h, respectively. (3) Axle weight distribution, inflation pressure of tire and moisture content of soil did not affect significantly the specific volumetric fuel consumption but affected significantly the fuel consumption per unit area of operation. Fuel savings amounted to 65% in plowing operation and 20% in flooded-field rotavating when the axle weight distribution and inflation pressure of tire were optimally adjusted. (4) Optimal adjustment of axle weight distribution and inflation pressure of tire are expected to save fuel consumption by 10~65% per unit area of operation in plowing and 10~20% in flooded-field rotavating.
This study was carried out to develop a shredding-burying machine for application of gramineae green manure crops that were tall and had high biomass yield such as sudan grass and rye. We made a prototype to operate both shredding and burying concurrently to attach at middle-sized tractors. Field tests were performed with the prototype to treat rye and sudan grass. The test results showed that the average cutting length became shorter and the quantity of entwined stem became obviously decreased when the PTO shaft speed was fast and running speed was slow. Also, We found, when the cut stem length became shorter, the burying ratio became more increasing and the PTO power requirement became more decreasing. Working efficiency of the prototype was better than conventional Rotary. The test results for treating rye/sudan grass with prototype showed that average cutting length was 21.2/22.5 cm and burying ratio was 98.4/98.1% when the PTO shaft speed was 1,000/1,000 rpm and running speed was 0.25/0.17 m/s. Also, the working performance of the prototype was 0.79 and 1.14 h/10 a for rye and sudan grass, respectively. Finally, we found that the prototype of shredding-burying machine was better for labor than conventional method that required at least 3 times bigger tractor.
오늘날 글로벌 수 출입 공급망 내에서 항만 하역작업의 효율성은 아주 중요하다. 해상운송에서는 컨테이너화와 더불어 늘어나는 화물량을 극복하기 위해서 초대형선의 운항이 일반화 되고 있다. 따라서 컨테이너 터미널의 관리자들은 안벽작업의 효율성을 극대화하기 위하여 더블 사이클과 듀얼 사이클 방법을 시도하고 있다. 또한, 야드 트랙터의 할당의 효율성을 높이기 위해서 야드 트랙터 풀링 방법이 제시되었다. 본 논문에서는 기존의 풀링 방법들과 듀얼 사이클을 고려한 풀링 방법의 비교를 통해서 듀얼 사이클의 효율성을 분석하였다. YT 할당 모형은 시뮬레이션 분석 소프트웨어인 Arena를 이용하여 수립되었다. 실험결과 듀얼 사이클이 많은 것이 항상 크레인 생산성을 높이는 것은 아닌 것으로 분석되었다.
본 연구에서는 농업용 트랙터에 조립식으로 결합되는 캐빈에 사용되는 방진고무의 진동절연성능을 향상시키기 위하여 형상최적설계를 수행하였다. 초탄성거동을 보이는 고무의 물성을 평가하기 위하여 일축 및 이축 인장시험을 수행하였고 이를 이용하여 유한요소해석에 입력 가능한 재료 모델을 도출하였다. 실제 트랙터의 운전 상태에서 진동을 측정하여 방진고무로 전달되는 입력 가진 및 이로 인한 캐빈 프레임의 응답을 정량화하였다. 비선형 거동을 보이는 방진고무의 특성을 반영하기 위해 정해석을 이용하여 방진고무의 하중-변위 곡선을 도출하였다. 이로부터 특정 하중 혹은 변위가 가해진 상태에서 방진고무의 강성을 계산할 수 있었으며 이를 캐빈의 조화가진해석에 사용하였다. 해석결과와 시험 결과의 비교를 통하여 해석모델 및 기법의 타당성을 검증하였다. 방진고무의 형상설계를 위하여 다구찌의 인자설계법이 사용되었으며 이를 통하여 강성이 최소화된 방진고무의 형상을 찾을 수 있었다. 방진고무의 최적 형상을 고려하여 조화가진해석을 수행한 결과 초기설계 대비 35 % 이상 개선된 진동저감효과를 확인할 수 있었다.
A swirl chamber type diesel engine attachable to 18 kW agricultural tractors was improved to reduce exhaust emissions. Compression ratio and throat area ratio of the combustion chamber were varied to determine optimum combustion conditions. Tests were composed of full load and 8-mode emission tests. Compression ratio was fixed as 21, but the swirl chamber volume was increased by 3.8%. Output power, torque, specific fuel consumption, exhaust gas temperature, and smoke level were not considerably different for compression ratios of 21.5 (reference condition) and 21 (test condition), while NOx, HC, CO and PM levels for the compression ratio of 21 were decreased by 11%, 46%, 28%, 11%, respectively, from those for the compression ratio of 21.5. The tests were also conducted with a compression ratio of 22 and 4.3% increased chamber volume. Output power, torque, exhaust gas temperature and smoke level were greater, while specific fuel consumption was less for the compression ratio of 22 than those for the compression ratio of 21.5. Increase of compression ratio decreased HC and CO levels by 24%, 39%, but increased NOx and PM levels by 24%, 39%. Based on these results, a compression ratio of 21 was selected as an optimum value. Then, full load tests with the selected compression ratio of 21 were carried out for different throat ratios of 1.0%, 1.1%, 1.2%. Output power and torque were greatest and smoke was lowest when throat area ratio was 1.1%, which satisfied the target values of specific fuel consumption (less than 272 g/$kW{\cdot}h$) and exhaust gas temperature (less than $550^{\circ}C$). Therefore, a throat area ratio of 1.1% was selected as an optimum value.
In Korean clothing industry, most of the manufactures produce garments by subcon-tractors partially or entirely. It is very often that the design part is remote from production part and there is miscommunication between these two parts resulting dissatisfaction to both. Therefore it is very important to communicate the manufacturing information clearly and quickly to produce garments exactly the design part intended. Also to automate the clothing out how to produce and use the information objectively and efficiently. As a first step of moving to automation, the purpose of the research is to find out how manufacturing information and data are communicated in clothing manufacturing at present. In order to follow the information flow of a cer-tain manufacturer, the case study method was used. The case study samples were 12 clothing firms of 13 brands. The results and suggestions are as follows :- 1. A manufacturing information is communicated through paper documents such as“Production Order”, sample and patterns. At present, a production order sheet is the most efficient communication media, which comprises most of the information being communicated. 2. A manufacturing information comprises control information on the product, design in-formation, pattern information, cutting information, material information, sewing information, production schedule information, quality control information, costing information and information about the subcontractors. 3. A manufacturing is not quite objective except pattern information and cutting information which is presented by CAD systems. The communication of design information and sewing information should be somehow more objective. 4. There is not much information from a subcontractor. Considering that a subcontractor is the other partener of the communication, more information from the subcontractor is required for both benefit. 5. A designer produce most of the manufacturing information, but the information is communicated through a production manager to the subcontractor. The difference between the information maker and information communicator can cause any miscommunication. In future automated manufacturing, it will be possible for the designer to communicate to the manufacturer directly from the early stage of designing.
본 논문은 태그간 메쉬 네트워킹 방법과 네트워크 간섭을 해결하기 위한 RFID 태그간 메쉬 네트워킹을 위한 듀얼 라디오 태그 시스템 의 구현을 설명한다. 최근 항만 또는 물류창고에서 상품 선적 및 보관 등의 정보를 자동화 하기 위해 RFID 전자태그가 부착된 컨테이너, 팔레트의 이용이 확대되고 있다. 그러나 RFID 시스템은 항만이나 물류창고에 산재되어 있는 금속성 물체 등으로 인해 리더와 태그간의 통신을 방해하는 음영지역이 발생한다. 본 논문에서 제안한 통신 음영지역 문제점 해결하기 위한 방법은 다음과 같다. 리더와 태그간의 직접 통신이 가능한 지역은 ISO/IEC 18000-7 표준에 따라 433MHz 주파수 대역에서 통신하고 리더와 태그간의 통신이 불가능한 음영지역이나 리더의 통신 범위를 벗어난 지역에서는 IEEE 802.15.4 표준에 따라 2.4GHz 주파수 대역에서 태그간 메쉬 네트워킹을 이용하여 통신한다. 이 방법을 적용한 통신방식은 리더와 태그간 통신에서 존재하는 통신 음영지역의 해소에 큰 도움을 줄 수 있고, 리더를 추가로 설치하는 방식보다 설치비용 절감 효과를 기대할 수 있다. 그리고 네트워크 인프라가 갖추어져 있지 않은 곳에서도 태그간 메쉬 네트워킹을 이용하여 쉽고, 빠르고, 경제적으로 네트워크 인프라를 구축할 수 있다.
The port of Busan is the fifth busiest container port in the world in terms of total mass of 20-foot equivalent units transported. Yet no attempts have been made to estimate the greenhouse gas (GHG) emissions from the port of Busan by accounting for all port-related activities of the various transportation modes. With these challenges in mind, this study estimates the first activity-based GHG emissions inventory in the port of Busan, which consists of four transportation modes: marine vessels, cargo-handling equipment, heavy-duty trucks, and railroad locomotives. The estimation results based on the most recent and complete port-related activity data are as follows. First, the average annual transportation GHG emission in the port of Busan during the analysis period from 2000 to 2007 was 802 Gg $CO_2$-eq, with a lower value of 773 Gg $CO_2$-eq and an upper value of 813 Gg $CO_2$-eq. Second, the increase in the transportation-related GHG emissions in the port of Busan during the analysis period can be systematically explained by the amount of cargo handled ($R^2$=0.98). Third, about 64% of total GHG emissions in the port of Busan were from marine vessels because more than 40% of all maritime containerized trade flows in the port were transshipment traffic. Fourth, approximately 22% of the total GHG emissions in the port of Busan were from on-road or railroad vehicles, which transport cargo to and from the port of Busan. Finally, the remaining 14% of total GHG emissions were from the cargo handling equipment, such as cranes, yard tractors, and reach stackers.
한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
/
pp.263-269
/
1996
In indian agricultural , the energy use pattern has played dominant role in influencing the level of mechanization . Besides that the agro-climatic factors as well as the size of holdings do affect the degree of mechanization . Nearly 30 percent of total cultivated area is owned by l76 percent of the small and tiny land holders each owning even less than a hectare. On the other hand, about 2 percent of land owners cultivate land. These variabilitieshave greatly influenced the ownership of power sources on Indian farms. Small farmers, employ human and animal energies with the use of hand tools and animal drawn equipments. Whereases, the use of tractors, power tillers, electric motors, etc. on small farms is on a marginal scale. There are few pockets and also extensive wheat growing regions where mechanical and electrical power sources are extensively used in production agriculture leading to about 185% of cropping intensity . In that region, the animal energy is employed for on the farm transport of fertilizers, fodders and fuel to support milch animals and other household activities . Inspite of high degree of mechanization, the harvesting of crops is done by human labour with few exceptions of harvesting wheat crops by combines in few pockets. In overall assessment of mechanization, the following conclusions are drawn : ⅰ) Farm operation which show a growing trend of mechanization are (a) tillge, (b) seedling (c) Irrigation (d) Plant protection application (e) Threshing and (f) Transport . ⅱ) Crop cultivation system in respect of wheat, maize and sorghum have been greatly mechanized. ⅲ) The least mechanized cropping systems are (a) vegetable production and (b) cultivation of sugarcane, cotton, rice and pulses. ⅳ) Annual production of tractor has touched the figure of 280.000 by 1995 and the total number has crossed 1.5million on Indian farms.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.