• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.23-29
• /
• 2013

This paper presents a tracking filter of radar beacon system (RBS) for automatic takeoff and landing of an unmanned aerial vehicle. The proposed tracking filter is designed as the decoupled tracking filter to reduce the computational burden. Also, an adaptive estimation method of the measurement error covariance is proposed to provide an improved tracking performance compared to the conventional decoupled tracking filter whenever the accuracy of RBS observations is degraded. 100 times Monte Carlo runs performed to analyze the performance of the proposed tracking filter in case of normal operation and degraded operations, respectively. The simulation results show that the proposed tracking filter provides the improved tracking accuracy in comparison with the conventional decoupled tracking filter.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.402-408
• /
• 2021

We are designed the delivery constitution technique that is to be measure the safe RFID statusof thewireless delivery system level (WDSL) on the delivery system tracking system. The delivery system level condition by the delivery system tracking system is organized with the RFID system. As to inspection a wireless network of the wireless network, we are found of the delivery value with wireless network by the upper take form. The concept of delivery system level is organized the reference of wireless level for delivery signal by the delivery RFID tracking system. Further, symbolizing a safe deliveryof the WDSL of the medium-minimum interval of the RFID tracking system, and the delivery wireless network RFID that was the delivery value of the far delivery of the DSTS-FA-_φMED-MIN with 5.80±1.20 units, that was the delivery value of the convenient delivery of the DSTS-CO-_φMED-MIN with 4.06±(-0.04) units, that was the delivery value of the flank delivery of the DSTS-_φMED-MIN with 0.91±0.07 units, that was the delivery value of the vicinage delivery of the DSTS-VI-_φMED-MIN with 0.18±(-0.03) units. The RFID will be to look into at the safe of the RFID tracking systemwith wireless network bythe delivery system level on the WDSL that is supply the wireless tracking system by the delivery system level system. We will be possible make to curb of a tracking system that to put the wireless signal and to use of the delivery data of RFID level by the delivery system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.5
• /
• pp.502-508
• /
• 2012

Heliostat, as a concentrator to reflect the incident solar energy to the receiver, is the most important system in the tower-type solar thermal power plant since it determines the efficiency and ultimately the overall performance of solar thermal power plant. Thus, a good sun tracking ability as well as a good optical property of it are required. Heliostat sun tracking system uses usually an open loop control system. Thus the sun tracking error caused by heliostat's geometrical error, optical error and computational error cannot be compensated. Recently use of sun tracking error model to compensate the sun tracking error has been proposed, where the error model is obtained from the measured ones. This work is a development of heliostat sun tracking error measurement and compensation method using BCS (Beam Characterization System). We first developed an image processing system to measure the sun tracking error optically. Then the measured error is modeled in linear polynomial form and neural network form trained by the extended Kalman filter respectively. Finally error models are used to compensate the sun tracking error. We also developed the necessary image processing algorithms so that the heliostat optical properties such as maximum heat flux intensity, heat flux distribution and total reflected heat energy could be analyzed. Experimentally obtained data shows that the heliostat sun tracking accuracy could be dramatically improved using either linear polynomial type error model or neural network type error model. Neural network type error model is somewhat better in improving the sun tracking performance. Nevertheless, since the difference between two error models in compensation of sun tracking error is small, a linear error model is preferred in actual implementation due to its simplicity.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.380-383
• /
• 2003

This paper proposes a new and simple input prediction method for robust servo system. This servo system uses robust tracking control system based on both Coprime Factorization(CF) and Zero Phase Error Tracking control system. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness and disturbance rejection ability The optical disk tracking servo system can detect only the tracking error. So the new and simple input prediction system proposed in this paper estimates the reference input signal from the tracking error. Numerical simulation results show that the proposed method is effective.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.89-99
• /
• 2008

In this paper proposes a novel tacking algorithm regarding the power loss when operating a tracking system for a rapidly changing insolation to improve the power of PV hacking system. The tracking system of sensor method used in a conventional PV power station is unable to exactly track a sun position when lacking in the intensity of radiation and has the problem is malfunction of tracking system by a rapidly changing climatic. The tracking system of program method spends too much energy on the unnecessary operation of tracking system because that is unable to adapt itself to a outside factor of climatic environment. In case of tracking an azimuth and altitude of the sun in realtime, therefore, the actual PV power is less increasing than the power of tracking system fixed a specific position. To reduce the power loss, this pap proposes a novel control algorithm of the tracking system. Also, this paper is analyzed efficiency of traditional solar tracking method and proposed method, prove validity of proposed algorithm through demonstrable study.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.185-202
• /
• 2004

Recent development in wireless computing and GPS technology cause the active development in the application system of location information in real-time environment such as transportation vehicle management, air traffic control and location based system. Especially, study about vehicle location tracking system, which monitors the vehicle's position in a control center, is appeared to be a representative application system. However, the current vehicle location tracking system can not provide vehicle position information that is not stored in a database at a specific time to users. We designed a vehicle location tracking system that could track vehicle location using mobile interface such as PDA. The proposed system consist of a vehicle location retrieving server and a mobile interface. It is provide not only the moving vehicle's current location but also the position at a past and future time which is not stored in database for users.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.116-121
• /
• 2011

The tracking radar systems in NARO space center are used in order to acquire the TSPI (Time, Space, and Position Information) data of the launch vehicle. The tracking radar produce the measurements of tracked targets in the radar-centered coordinate system. When the tracking radar is in the Cartesian/Polar tracking mode, the state vector data is sent in radar-centered Cartesian/Polar coordinate system to RCC. RCC also send the slaving data in Test Range coordinate system to the tracking radar. So, the tracking radars have to transform the slaving data in Test Range coordinate system into in radar-centered coordinate system. In this study, we described the coordinate transformation between radar-centered coordinate system and Test Range coordinated system.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.1017-1028
• /
• 2019

Pedestrian tracking is a particular object tracking problem and an important component in various vision-based applications, such as autonomous cars and surveillance systems. Following several years of development, pedestrian tracking in videos remains challenging, owing to the diversity of object appearances and surrounding environments. In this research, we proposed a tracking-by-detection system for pedestrian tracking, which incorporates a convolutional neural network (CNN) and color information. Pedestrians in video frames are localized using a CNN-based algorithm, and then detected pedestrians are assigned to their corresponding tracklets based on similarities between color distributions. The experimental results show that our system is able to overcome various difficulties to produce highly accurate tracking results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.187-193
• /
• 1998

This paper proposes an advanced visual tracking algorithm for the stable grasping of a moving target(2D). This algorithm is programmed to find grasping points of an unknown polygonal object and execute visual tracking. The Kalman Filter(KF) algorithm based on the SVD(Singular Value Decomposition) is applied to the visual tracking system for the tracking of a moving object. The KF based on the SVD improves the accuracy of the tracking and the robustness in the estimation of state variables and noise statistics. In addition, it does not have the numerical unstability problem that can occur in the visual tracking system based on Kalman filter. In the grasping system, a parameterized family is constructcd, and through the family, the grasping system finds the stable grasping points of an unknown object through the geometric properties of the parameterized family. In the previous studies, many researchers have been studied on only 'How to track a moving target'. This paper concern not only on 'how to track' but also 'how to grasp' and apply the grasping theory to a visual tracking system.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.175-181
• /
• 1998

This paper describes realtime visual tracking system of moving object for three dimensional target using EKF(Extended Kalman Filter). We present a new realtime visual tracking using EKF algorithm and image prediction algorithm. We demonstrate the performance of these tracking algorithm through real experiment. The experimental results show the effectiveness of the EKF algorithm and image prediction algorithm for realtime tracking and estimated state value of filter, predicting the position of moving object to minimize an image processing area, and by reducing the effect by quantization noise of image.