• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.42-48
• /
• 2023

Abstract: In this study, an induction heating system using resonance is developed to remove remaining moisture and contaminations which could be generated during fabricating secondary batteries. This system is composed of power supply and induction coil. Power supply needs an oscillator, zero crossing detection, frequency tracking function, and induction coil needs a dummy coil to obtain a uniform temperature distribution. It is very important to obtain a uniform heating temperature distribution of battery cell case in the induction heating system before pouring electrolyte into battery cell. Experimental results show a temperature distribution deviation of below 1℃ in the external position of battery cell cases. As well, the temperature of battery cell itself shows distribution of 40℃±3℃.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.25-27
• /
• 2021

With the recent development of deep learning technology, computer vision-based AI technologies have been studied to analyze the abnormal behavior of objects in image information acquired through CCTV cameras. There are many cases where surveillance cameras are installed in dangerous areas or security areas for crime prevention and surveillance. For this reason, companies are conducting studies to determine major situations such as intrusion, roaming, falls, and assault in the surveillance camera environment. In this paper, we propose a real-time abnormal behavior analysis algorithm using object detection and tracking method.

• The Journal of the Korean dental association
• /
• v.57 no.2
• /
• pp.52-63
• /
• 2019

Technological advances in contemporary medicine has discovered the causes of countless diseases and recorded a noticeable medical performance. As technology develops, the role of hospitals is expanding to include disease prevention of inpatients, on top of their fundamental role of treating diseases. Recently, hospitals are becoming more influential as they create environments to provide comfort and stability to patients. In this regard, contemporary hospitals are increasingly shifting their focus to create a patient-centric environment as well as develop into humanistic establishments. The same goes to dentists, as well. Since inpatients often have fear and frustration over treatment, hospitals should figure out the environmental factors that are more effective and relaxing for patients and design medical services to provide them. The patients' movement and spaces during their treatment were categorized by stages and collected for gazing information using eye tracking. It analyzed users' gaze information according to Heatmap analysis of distribution and frequency and was determined the presence or absence of stimuli on the components of space. This research is an advanced research to study and enhance treatment environment based on the analysis of patients' gazes. It attempted to create an opportunity to get closer to patient-centric environment by understanding the stimulants and obstacles and controlling the background settings.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.63-68
• /
• 2023

In this paper, we introduce a system that tracks and shares the position of objects based on tags. After receiving the location information of objects through the tag location tracking app, the location of the tag is shared as a group, and the shared users also check the location of objects in real time. Our system offer a differentiated function that allows multiple users to manage and supervise the location of objects, compared to legacy systems. The GPS module and Bluetooth are connected to the Arduino board to obtain the location information of the tag and check it through the Android app. We used Android Studio to create app, and the tag brings up the location of the object. The location of the tag is stored in the phpMyadmin DB and the latitude/longitude is received to the Android app and displayed on the map of the app. The proposed system will be useful for loss prevention and managing public goods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.41-49
• /
• 2024

This paper discusses the modeling and implementation of a worker location system at a shipbuilding site. The importance of worker location in an industrial environment is highlighted as a critical element in the prevention of industrial accidents. The paper presents a worker tracking system that integrates power line and beacon communication to accurately track worker position. Through experiments, the paper demonstrates how to monitor the changes in worker location based on different scenarios and how to access the status of worker location using the manager's web service. The paper can be used for the design of a system that will provide real-time location information to safety managers for the improvement of worker safety management.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.94-102
• /
• 2022

Construction workers are engaged in many activities that may expose them to serious hazards, such as falling, unguarded machinery, or being struck by heavy construction equipment. Despite extensive research in building information modeling (BIM) for safety management, current approaches, detecting safety issues after design completion, may limit the opportunities to prevent predictable and potential accidents when decisions of building materials and systems are made. In this respect, this research proposes a proactive approach to detecting safety issues from the early design phase. This research aims to explore accident precursors and integrate them into BIM for tracking safety hazards during the design development process. Accident precursors can be identified from construction incident reports published by OSHA using a text mining technique. Through BIM-integrated accident precursors, construction safety hazards can be identified during the design phase. The results will contribute to supporting a successful transition from the design stage to the construction stage that considers a safe construction workplace. This will advance the body of knowledge about construction safety management by elucidating a hypothesis that safety hazards can be detected during the design phase involving decisions about materials, building elements, and equipment. In addition, the proactive approach will help the Architecture, Engineering and Construction (AEC) industry eliminate occupational safety hazards before near-miss situations appear on construction sites.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2024

In this paper, as there are many cases of fires occurring due to the failure or inoperability of the thermostat of electronic products, the purpose is to test and analyze the risks and probabilities through fire cases and reproduction experiments, and suggest countermeasures. Among electronic products, water purifiers are composed of a refrigerant system with a compressor to make cold water, a heating device to make hot water, and an electric device used as an energy source. Due to the nature of the water purifier manufacturing, these devices are subject to a lot of moisture and dust. etc. exist in large quantities and use electrical energy, so there is a possibility of fire due to short circuit in the wire, electrical abnormal overheating (tracking phenomenon) in the thermostat, electronic board, starting relay, etc., and overheating of the heating device (Band Heater). there is. Therefore, in order to prevent fires from these devices, a system to remove foreign substances inside the water purifier is necessary, the use of heat-resistant (fire-resistant) wires for electrical devices is essential, and the use of non-combustible materials (semi-combustible materials) for each part is necessary to prevent fire. The risk must be eliminated through prevention and combustion expansion prevention devices.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1435-1447
• /
• 2015

Finance Companies are operating a security solution such as E-DRM(Enterprise-Digital Right Management), Personal information search, DLP(Data Loss Prevention), Security of printed paper, Internet network separation system, Privacy monitoring system for privacy leakage prevention by insiders. However, privacy leakages are occurring continuously and it is difficult to the association analysis about relating to the company's internal and external distribution of private document. Because log system operated in the separate and independent security solutions. This paper propose a systematic chains that can correlatively analyze business systems and log among heterogeneous security solutions organically and consistently based on security documents. Also, we suggest methods of efficient detection for Life-Cycle management plan about security documents that are created in the personal computer or by individual through the business system and distribution channel tracking about security documents contained privacy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.425-434
• /
• 2010

This study shows a limit to attacks that the prevention system, which is used as the mutual third aggressive packet path between open heterogeneous networks and applies prevention techniques according to the trace like IP tracking and attack methods, can prevent. Therefore, the study aims to learn information of constant attack routing protocol and of the path in network, the target of attack and build a database by encapsulating networks information routing protocol operates in order to prevent source attack paths. In addition, the study is conducted to divide network routing protocols developed from the process of dividing the various attack characters and prevent various attacks. This study is meaningful in that it analyzes attack path network and attacks of each routing protocol and secure exact mechanism for prevention by means of 3D-Puzzle, Path, and Cube of the integrated security system which is an implementation method of integrated information protection for access network defense.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.