• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.41-46
• /
• 2007

Dynamic behavior of immiscible gas bubble attached to the wall in channel flow plays very important role in many engineering applications. Special attention has been paid to micro direct methanol fuel cell(${\mu}$DMFC) where surface tension becomes dominant factor with minor gravitational effect due to its reduced size. Therefore, displacement of $CO_2$ bubble generating on a cathode side in ${\mu}$DMFC can be very difficult and efficient removal of $CO_2$ bubbles will affect the overall machine performance considerably. We have focused our efforts on studying the dynamic behavior of immiscible bubble attached to the one side of the wall on 2D rectangular channel subject to external shear flow. We used Level Contour Reconstruction Method(LCRM) which is the simplified version of front tracking method to track the bubble interface motion. Effects of Reynolds number, Weber number, advancing/receding contact angle and property ratio on bubble detachment characteristic has been numerically identified.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.248-257
• /
• 1999

A mathematical model was developed to investigate the mechanical interrelation between soil characteristics and main design factors of a tracked vehicles , and predict the tractive performance of the tracked vehicles. Based on the mathematical model, a computer simulation program(TPPMTV98) was developed in this study. The effectiveness of the developed model was verified by comparing the predicted drawbar pulls using TPPMTV98 with measured ones from traction tests with a tracked vehicle reconstructed for test in loam soil with moisture content of 18.92%(d.b). The drawbar pulls measured by the TPPMTV98 were well matched to the measured ones. Such results implied that the model developed in this study could estimate the drawbar pulls well at various soil conditions , and would be very useful as a simulation tool for designing a tracked vehicle and predicting its tractive performance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.58-60
• /
• 2017

In the offshore crane system, the requirements on the operating safety are extremely high due to many external factors. This paper describes a model for studying the dynamic behavior of the offshore crane system. The obtained model allows to evaluate the fluctuations of the load arising from the elasticity of the rope. Especially, in this paper, the authors design control system in which just winch rotation angle and rope tension are used without load position information. The controller design based on input-output feedback linearization theory is presented which can handle the effect of the elasticity of the rope and track the load target trajectory input. Besides that, a full order observer is designed to estimate unknown states. Finally, By the experiment results, the effectiveness of proposed control method is evaluated and verified.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.562-567
• /
• 2005

F.C.M applied from Jin Jung Li to Yang Su Li(660m) in Puk Han River Bridge(1,414m) construction part is a construction method on the double-track construction which is the third section part of work, called Chung Ang Railroad Line(Deok-So${\sim}$Won-Ju). This method is the beginning application on Railroad Bridge. After completing upper slab structure, there are several following works such as setting up ballast, sleepers and laying long rails. So it is important to consider the properties of Railroad Bridge while designing the length of bridge and its single span. After the physical process study the shrinkage and creep of concrete, bending up by prestressing in general PSM bridge, relaxation of tendons as time goes by after post-tension, the conclusion of such a study is applied to the Puk-Han River Bridge in this construction field.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.401-410
• /
• 2007

Form the application of long rail system the non-ballast steel plate bridges, fatigue strength increase and rail noise reduction can be expected. This is mainly form the reduction of the rail impact at the rail joint locations which already made to behave together from welds. In the high speed rail, application of long rail system is essential because without long rail system, the required serviceability level can not be achieved. But even with this long rail systems, the thermal expansion from the girder can not be absorbed in the normal bearing systems, and these expansion cause between girder and rail. Also unexpected rail buckling and fracture through rail thermal tension may happen. It was found through numerical analysis and field measurement that these problems can be avoided by semi-fixed bearing system. In this study, the benefits of non-ballast plate bridge through long rail system, especially at the point of girder stability, girder stiffness increase and bearing maintenance will be reviewed.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.676-682
• /
• 2009

The idler wheel installed at the front side of the newly developed tracked vehicle didn't meet the durability requirement by showing the crack failure near the jointed region at the wheel during the field test. To find the crack developing mechanism we constructed finite element model for the idler wheel representing the behavior of interface between each suspension units, material properties from the material test data and actual loading conditions. This paper shows a result that maximum von Mises stress near the bolt hole on the outer rim is higher than inner idler coressponding to the actual test result and that result was reversed by adopting the reinforcement outside of the outer rim.

• 멤브레인
• /
• 제33권3호
• /
• pp.110-126
• /
• 2023

이 총설에서는 다양한 소재를 이용한 고분자 분리막의 제조를 위한 제조방식, 특성과 여러가지 인자들에 대해서 논의하고자 한다. 분리막 제조방식은 상전이, 계면중합, 연신, 트랙에칭 그리고 전기방사 같은 방법을 주로 강조하여 설명하고자 하며, 추가적으로 다양한 응용에 따른 제조방식에 대한 한계나 응용성에 대해서도 설명하고자 한다. 또한 다양한 고분자 분리막의 표면거칠기, 표면장력, 표면전하와 표면의 기능성 작용기 같은 표면특성에 대해서도 정리하였으며, 막성능의 향상을 위하여 상전이법이나 계면중합 같은 일반적인 분리막 제조공정에서 필요한 추가적인 향상방법을 나타내었다. 트랙에칭이나 전기방사와 같은 새로운 제조방법의 가능성에 대해서도 분석하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.53-62
• /
• 2018

국내뿐만 아니라 세계적인 추세로 증가하고 있는 열차의 고속화와 대량 운송능력의 요구에 따라 열차 궤도구조의 개발은 지속적으로 발전하고 있다. 콘크리트 구조궤도인 PST는 안전성과 경제성에서 그 요구조건을 충족할 수 있는 시스템으로 개발되고 있다. 따라서 본 연구에서는 PST시스템의 각 구조부재의 거동을 분석함으로써 향후 시스템 개발 및 설계에 필요한 정보를 제공하고자 하였다. KRL-2012 열차하중과 KRC 코드에 의한 다양한 정적하중조합에 따른 응력분포 결과를 3차원 유한요소 해석을 통하여 분석하였으며, 그라우트충전층의 두께에 따른 결과 또한 제공하고자 하였다. 구조부재별로는 그라우트충전층에서 가장 큰 응력이 발생하였으며 하중조합과 두께에 따라 응력의 변화가 민감하였다. 시동하중 및 온도하중에 의해서는 KRL-2012에 의한 수직하중만 적용할 때와 비교하여 콘크리트 패널과 HSB에서 각각 3.3배, 14.1배의 발생응력이 증가하는 것으로 나타났다. 충전층의 두께가 20mm에서 80mm로 증가할 때 콘크리트 패널의 발생 응력은 4% 감소하지만, 충전층은 24% 증가하는 것으로 나타났다. 균열의 양상은 그라우트충전층에서 인장균열이 국부적으로 발생하는 것으로 나타났다. 이와같은 결과에 따라 PST시스템 개발 시에는 수직하중 보다는 수평하중에 의한 휨 및 인장거동에 세심한 주의가 필요하며, 충전층의 두께를 40mm 이상 유지함으로써 각 구조부재의 안전성을 확보할 수 있도록 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2648-2653
• /
• 2007

Recently, increasing demand on not only lighter but also extremely mobile battery make micro fuel cell device very attractive alternative. By reducing the size of fuel cell, surface tension becomes dominant factor with minor gravitational effect. Therefore, it is very difficult to detach the $CO_2$ bubble generating on a cathode side in ${\mu}DMFC$ (micro direct methanol fuel cell). The degassing of a $CO_2$ bubble has drawn quite attention especially for ${\mu}DMFC$ due to its considerable effect on overall machine performance. Our attention has been paid to the dynamic behavior of immiscible bubble attached to the one side of the wall on 2D rectangular channel subject to external shear flow. We use Level Contour Reconstruction Method (LCRM) which is simplified version of front tracking method to track the bubble interface motion. Effects of Reynolds number, Weber number, advancing/receding contact angle and property ratio on bubble detachment characteristic has been numerically identified.

• Structural Engineering and Mechanics
• /
• 제31권6호
• /
• pp.625-638
• /
• 2009

Applications of membrane mechanisms are widely found in nano-devices and nano-sensor technologies nowadays. An alternative approach for large deflection analysis of the orthotropic, elliptic membranes - subject to gravitational, uniform pressures often found in nano-sensors - is described in this paper. The material properties of membranes are assumed to be orthogonally isotropic and linearly elastic, while the principal directions of elasticity are parallel to the coordinate axes. Formulating the potential energy functional of the orthotropic, elliptic membranes involves the strain energy that is attributed to inplane stress resultant and the potential energy due to applied pressures. In the solution method, Rayleigh-Ritz method can be used successfully to minimize the resulting total potential energy generated. The set of equilibrium equations was solved subsequently by Newton-Raphson. The unparalleled model formulation capable of analyzing the large deflections of both circular and elliptic membranes is verified by making numerical comparisons with existing results of circular membranes as well as finite element solutions. The results are found in excellent agreements at all cases. Then, the parametric investigations are given to delineate the impacts of the aspect ratios and orthotropic elasticity on large static tensions and deformations of the orthotropic, elliptic membranes.