1 |
Bonet, J. (2000), "Finite element analysis of air supported membrane structures", Comput. Meth. Appl. Mech. Eng., 190, 579-595
DOI
ScienceOn
|
2 |
Bouzidi, R. and Le van, A. (2004), "Numerical solution of hyperelastic membranes by energy minimization", Comput. Struct., 82, 1961-1969
DOI
ScienceOn
|
3 |
Bouzidi, R., Ravaut, Y. and Wielgosz, C. (2003), "Finite elements for 2D problems of pressurized membranes", Comput. Struct., 81, 2479-2490
DOI
ScienceOn
|
4 |
Fitcher, W.B. (1997), "Some solutions for the large deflections of uniformly loaded circular membranes", NASA Technical Paper 3658. Hampton, Virginia, USA: NASA Langley Research Center, 1-20
|
5 |
G+D Computing, Using STRAND7 Introduction to the Strand7 finite element analysis system (2002), Sydney G+D Computing Pty Ltd
|
6 |
Hencky, H. (1915), "On the stress state in circular plates with vanishing bending stiffness", Zeitschrift Fr Mathematik und Physik, 63, 311-317
|
7 |
Kao, R. and Perrone, N. (1972), "Large deflections of flat arbitrary membranes", Comput. Struct., 2, 535-546
DOI
ScienceOn
|
8 |
Kondo, K. and Uemura, M. (1972), "Deformations and stresses of orthotropic retangular membrane under uniform lateral pressure", Proceedings of 1971 IASS Pacific Symposium Part II Tension Structures and Space Frames, (2-7), 211-222
|
9 |
Sheplak, M. and Dugundji, J. (1998), "Large deflections of clamped circular plates under initial tension and transitions to membrane behavior", ASME J. Appl. Mech., 65, 107-115
DOI
ScienceOn
|
10 |
Storkers, B. (1983), "Small deflection of linear elastic circular membranes under lateral pressure", ASME J. Appl. Mech., 50, 735-739
DOI
|
11 |
Voorthuyzen, J.A. and Bergveld, P. (1984), "The influence of tensile forces on the deflection of circular diaphragms in pressure sensors", Sensor Actuat. A, 6, 201-213
DOI
ScienceOn
|
12 |
Wu, B., Du, X. and Tan, H. (1996), "A three-dimensional Fe nonlinear analysis of membranes", Comput. Struct., 59, 601-605
DOI
ScienceOn
|