• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1149-1155
• /
• 2007

The transition area between a bridge and an earthwork is one of the weakest area of track because of the track geometry deterioration caused unequal settlement of backfill of abutment. In case of a ballastless track, the approach slab is installed to prevent the phenomenon. But, if there is occurred the inclined displacement on the approach slab by a settlement of the foundation or formation, the track is also under the inclined displacement. And this defect causes reducing the running stability of a vehicle, the riding comfort of passengers, and the deteriorations of track by excessive impact subjected to the track. In this study, parametric studies were performed to know what is the allowable displacement limit on the approach slab to avoid such a bad effect. The length and amount of unequal settlement of the approach slab was adopted as parameter for numerical analysis. And car body accelerations, variations of wheel force and rail stress and uplift force induced on a fastener clip are investigated. From the result, resonable settlement limits of an approach slab according to slab length was suggested.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1992년도 한국우주과학회보 제2권1호
• /
• pp.20-20
• /
• 1993

An accurate prediction of the satellite ground track is essential to optimise the maneuver design. It requres a prediction model that considers all perturflations that cause significant variations in the satellite ground track. We developed a prediction model that includes the effects of the fifth-order zonal harmonics, atmospheric drag, and luni-solar gravitational perturbations. Luni-solar gravity perturbations have been obtained in an ether way which is different from the method we used in previous paper(Yi and Choi, 1992). In this case, we consrtuct our own disturbing fuction including inclination term by the Algebraic Manipulation. Luni-solar perturbations reduce the maneuver magnitude required to offset eastward ground track drift due to drag, the amount dependent on current luni-solar phasing geometry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.305-309
• /
• 2010

The buckling behavior of CWR tracks is affected by the various parameters such as stiffness and geometry of track panel, ballast resistance, rail temperature, initial imperfection, and wheel load. Until now, CWR tracks were managed by the dichotomous logic (deterministic approach) despite these influence factors are having the nature of random variables. So, the design method and existing management process to prevent the track buckling can be very non-economic since the value of these influence factors to calculate the track buckling strength are selected by considering the worst track condition. In this study, buckling probability evaluation process is proposed which is based on the reliability index, AFOSM method, and limit state equation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.278-282
• /
• 2007

The riding comfort and the durability of train are effected by the rail irregularities such as track gauge, superelevation, alignment, longitudinal level, twist, cant and cross level. Inspection and estimation of irregularities are very important to maintain the rail condition. Generally, the EM120 has been utilized to measure the rail irregularities once a month in Korea. However, the EM120 can be operated at night time only, because the inspection speed of EM120 is much slower than the speed of high-speed trains. Also, the EM120 is too slow to inspect effectively for the whole commercial line. Therefore, we have mounted the track inspection system on the High-Speed Rolling Stock 350 eXperimental (HSR350X) and measured the rail irregularities to confirm the condition of a rail while running 300km/h. In this paper, the track inspection system mounted on HSR350X is mainly considered, and the measured results through test run are introduced.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.297-313
• /
• 2012

This paper is intended to show the robustness and capabilities of a coupled boundary element-finite element technique for the analysis of vibrations generated by high-speed trains under different geometrical, mechanical and operation conditions. The approach has been developed by the authors and some results have already been presented. Nevertheless, a more comprehensive study is presented in this paper to show the relevance and robustness of the method which is able to predict vibrations due to train passage at the vehicle, the track, the free-field and any structure close to the track. Local soil discontinuities, underground constructions such as underpasses, and coupling with nearby structures that break the uniformity of the geometry along the track line can be represented by the model. Non-linear behaviour of the structures can be also considered. Results concerning the excitation mechanisms, track behaviour and sub-Rayleigh and super-Rayleigh train speed are summarized in this work.

• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.195-202
• /
• 2008

교량과 토공의 접속부은 궤도의 대표적인 취약구간으로서 교대배면의 부등침하로 인한 궤도틀림발생이 빈번하여 유지관리에 많은 어려움을 겪고 있는 구간 중의 하나이다. 콘크리트궤도부설구간의 경우에는 교대배면의 부등침하를 방지하기 위하여 접속슬래브 부설이 일반화되고 있는 추세이다. 이 경우, 접속슬래브를 지지하고 있는 노반의 침하로 인하여 접속슬래브에 경사처짐이 발생하게 되면 궤도도 경사처짐이 발생하게 된다. 이로 인해 이 구간을 통과하는 차량의 주행안정성과 승차감의 저하, 그리고 과도한 충격에 의한 궤도의 손상을 유발하게 되므로 접속슬래브의 단부에서의 침하를 제한할 필요가 있다. 따라서 본 연구에서는 콘크리트 궤도 부설 교량과 토공의 접속부에 부설되는 접속슬래브의 단부에서의 처짐한도를 알아보기 위하여 접속슬래브의 길이와 단부처짐량을 매개변수로 한 차량-궤도 상호작용 해석을 실시하여 차체가속도, 윤중변동률, 레일 저부응력, 그리고 체결구에 발생하는 상향압력을 조사하였으며, 수치해석결과와 각 검토항목별 허용한도와의 비교검토를 통하여 접속슬래브의 길이에 따른 단부처짐의 허용한도를 제시하였다.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.97-103
• /
• 2009

Since a demand for an extensive range of earthmoving equipment like a hydraulic excavator with a capacity of 85tons has been asked in construction fields, a performance of its track drive unit has to be verified experimentally. Among the verification of the performances, a torque measurement is at issue, in which a torque meter is utilized widely. However, the very large scaled torque meter is necessary when a discharged torque from the track drive unit is increased significantly. In addition, the price for experimental set-up of a torque meter is too high due to its limitation of the geometry such as long length, and a break down in operation occurs frequently. In this study, to measure a high torque up to 200,000Nm, a new technique was proposed as an alternative of conventional measurement by using a torque meter. The new technique enables to measure the high torque stably in a compact space via a torque arm and two load cells. The experimental results showed a propriety of the proposed torque measuring technique for a track drive unit with very large capacity.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.95-103
• /
• 2009

교대나 교각 위 교량 슬래브 단부의 변형은 궤도 틀림이나 유지보수의 주요 원인이 되고 있으며, 특히 콘크리트 슬래브궤도가 설치되는 경우에는 궤도구조의 강성과 교량 슬래브와의 일체 성으로 레일 및 지지구조의 사용성에 심각한 영향을 미치는 변형과 추가하중이 발생하게 된다. 이번 연구에서는 교량 슬래브 단부 변형으로 인해 발생하는 궤도구조의 사용성에 영향을 미치는 인자를 파악하고 매개변수 해석을 통해 변수 별 영향 정도를 파악하였다. 연구 결과 단경간교 보다 연속교가 레일 지지점 하중 감소에 유리하고, 마지막 레일 지지점과 교량받침 사이 간격, 교량받침 강성, 체결구 강성이 사용성에 큰 영향을 미치는 것으로 분석되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.287-296
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. A movable nose crossing frog is a device used at a railway turnout to eliminate the gap at the common crossing (High manganese, block, assembly crossing)which can cause impact damage, noise and vibration. Our government has a plan speed up of conventional line to 250km/h semi-high speed. We had already developed flexible turnout with fixed crossing(High manganese) and SFC fastening system can cover in the semi-high speed line In this study is about development of the movable nose crossing turnout available Semi-high speed line on concrete track. This paper describes about geometry, attack angle, bending stress at the nose, switching force, safety of continuous welded long rails. This movable nose crossing turnout is expected greatly increases passing speed of turnout in national railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.517-524
• /
• 1998

A liner numerical model of the wheel-rail interation and the track geometry is developed for multi-body dynamics program. The simulation results are very simulation to these of VAMPIRE simulation. This program can be used for the analysis of train dynamic performance.